All Products /
Brakes All AVID Parts AVID Brake Hardware
Avid BB-Mechanical Disc Brake Parts
|
Avid Bb7 Pad Adjuster Knob Kit
|
Avid Brake Lever Blades & Pivot Parts
|
Avid Caliper Parts
|
Avid Caliper Parts
|
Service parts for Avid hydraulic disc brake calipers. Most kits are for (1) caliper (except where noted).
Features: - Contains 1 M5 x 16, 1 M5 x 18, and 1 M5 x 25 bolts
|
|
CBO:
|
|
|
Avid Caliper Parts
|
|
Avid Carbon Lever Blade Kit
|
Avid Carbon Lever Blade Kit
|
* Lever blade kits sold each.
* Most lever pivot kits include pushrods.
Fits '09/10 Elixir-R/CR*/Carbon.
|
|
CBO:
|
|
|
Avid Carbon Lever Blade Kit
|
|
Avid Code Hydraulic Line Kit
|
Avid Code Master Cylinder And Lever Parts
|
Avid Complete Calipers
|
Avid Complete Calipers
|
Complete caliper replacement for Avid hydraulic disc brake systems. Calipers are 74mm post-mount to be used with applicable adapters. Includes: caliper, bleed screw(s), pistons, and brake pads (no tubing attachment parts, see hose kit and/or fittings).
|
|
CBO:
|
|
|
Avid Complete Calipers
|
|
Avid Cps Disc Brake Mounting Bracket
|
Avid Cps Disc Brake Mounting Bracket
|
For 74mm caliper brakes mounting to 51mm International Standard quick release forks.
For 160-165mm, 185mm, 203mm in either fronts or rears
|
|
CBO:
|
|
|
Avid Cps Disc Brake Mounting Bracket
|
|
Avid Cps Disc Brk 74Mm Fork Post Bracket
|
Avid Disc Brake Adapters and Hardware
|
Avid Disc Brake Adapters and Hardware
|
Adapts Avid 74mm calipers to fit various forks/frames and rotors AV-7362 through AV-7366 are lighter, XX-inspired (Mg) magnesium construction instead of aluminum Adapters do not include CPS mounting hardware, if needed use AV-630222 or AV-6303 (for "XX" level Torx-T25 titanium hardware, use AV-6304 or AV-6305) IS: 51mm international standard / PM: 74mm post-mount / QR: quick-release / TA: thru-axle For Fox-40, use AV-630192 (160mm) bracket with 203mm rotor kit
|
|
CBO:
|
|
|
Avid Disc Brake Adapters and Hardware
|
|
Avid Disc Brake Bleed Kit
|
Avid Disc Brake Bleed Kit
|
Works with all Avid hydraulic disc brake systems.
Compatible with: Code, XX, XO, Elixir and Juicy
Contents:
Two standard syringes
Two hose clamps
Two threaded hose barbs
Two hose fittings
Torx wrench (T25, T10)
Four bleed blocks
Crow's foot wrench
4oz. bottle of DOT 5.1 fluid
|
|
CBO:
|
|
$39.95
|
|
msrp:$51.00
|
|
You save 21% |
|
|
|
|
Avid Disc Brake Bleed Kit
|
|
Avid Disc Brake Rotor Bolt Set
|
Avid Elixir Disc Brake Hose Kits
|
Avid G2 Clean Sweep Disc Brake Rotor
|
Avid G2 Clean Sweep Disc Brake Rotor
|
Replacement rotor for Avid ball bearing disc brakes. Special manufacturing process resists warping and provides optimum braking. Avid's unique design ensures the entire brake pad contacts the rotor, preventing uneven pad wear.
Choose 160mm for cross country -normal use, 185mm for more powerful braking for heavier and-or more aggressive riders, and 203mm for maximum braking power for downhill bikes and other extreme use. Includes fixing bolts
|
|
CBO:
|
|
$34.99
|
|
msrp:$40.00
|
|
You save 12%| |
|
|
|
|
Avid G2 Clean Sweep Disc Brake Rotor
|
|
Avid G3 Center Lock Disc Brake Rotor
|
Avid G3 Clean Sweep Disc Brake Rotor
|
Avid G3 Clean Sweep Disc Brake Rotor
|
Comes standard on the Avid Elixir brakes. Special manufacturing process resists warping and provides optimum braking. Avid's unique design ensures the entire brake pad contacts the rotor, preventing uneven pad wear.
Choose 160mm for cross country -normal use, 185mm for more powerful braking for heavier and-or more aggressive riders, and 203mm for maximum braking power for downhill bikes and other extreme use. Includes fixing bolts
|
|
CBO:
|
|
$29.99
|
|
msrp:$44.00
|
|
You save 31% |
|
|
|
|
Avid G3 Clean Sweep Disc Brake Rotor
|
|
Avid HS1 Disc Brake Rotor
|
![Avid HS1 Disc Brake Rotor]()
Avid HS1 Disc Brake Rotor
|
HS1 rotors utilize a quiet, heat-shedding design in all stainless steel (20mm increments for 2012+ brakes can be used on older models if mated with correct caliper sizing adapter)
# (IS) International Standard 6-bolt (44mm BCD)
|
|
CBO:
|
|
$32.99
|
|
msrp:$40.00
|
|
You save 17%| |
|
|
|
|
Avid HS1 Disc Brake Rotor
|
|
Avid HSX Disc Brake Rotor
|
![Avid HSX Disc Brake Rotor]()
Avid HSX Disc Brake Rotor
|
* HSX rotors utilize a quiet, heat-shedding design with a stainless rotor mounted to an aluminum carrier (20mm increments for 2012+ brakes can be used on older models if mated with correct caliper sizing adapter)
|
|
CBO:
|
|
$65.00
|
|
msrp:$72.00
|
|
You save 9%| |
|
|
|
|
Avid HSX Disc Brake Rotor
|
|
Avid Hydraulic Disc Brake Bleed Kit
|
Avid Hydraulic Pro Disc Brake Bleed Kit
|
![Avid Hydraulic Pro Disc Brake Bleed Kit]()
Avid Hydraulic Pro Disc Brake Bleed Kit
|
Pro kit includes: 2) pro-series syringes with ergo-handled metal plunger and replaceable seals, 2) high-volume hoses with clamps / aluminum couplings / rotating knurled-steel fittings, 4) compression ferrules, 4) barbed tubing inserts, 1) Torx-T25 L-wrench, 1) 3/8"-drive 8mm crows-foot, 4) different bleed blocks for XX/Elixir/Code/Juicy, 1) 2oz bottle of DOT-5.1 brake fluid, and instructions
|
|
CBO:
|
|
$49.95
|
|
msrp:$60.00
|
|
You save 16%| |
|
|
|
|
Avid Hydraulic Pro Disc Brake Bleed Kit
|
|
Avid Hydraulic Tubing & Fittings
|
Avid Hydraulic Tubing & Fittings
|
Cut-to-fit tubing kits for front or rear applications: sold each (banjo/caliper bolt, bleed kit, and/or DOT fluid sold separately). Elixir kit includes: 2000mm tubing with pre-crimped M6x1 male-inline caliper fitting plus sealing o-ring, and a M8x.75 male-inline lever fitting kit with tubing/fitting boot . Code kit includes: 2200mm tubing with Code-specific banjo, M8x.75 inline fitting kit, and Code-specific and tubing/fitting boot . Juicy Ultimate/Carbon/7/5 kit includes: 2000mm tubing with Avid Hydraulic Tubing & Fittings Details...
|
|
CBO:
|
|
$11.40
|
|
msrp:$20.80
|
|
You save 45%| |
|
|
|
|
Avid Hydraulic Tubing & Fittings
|
|
Avid Juicy Barbed Tubing Insert
|
Avid Juicy Barbed Tubing Insert
|
Fits Avid Juicy disc brakes from model years 2005-06. Sold individually
|
|
CBO:
|
|
$1.95
|
|
msrp:$2.95
|
|
You save 33% |
|
|
|
|
Avid Juicy Barbed Tubing Insert
|
|
Avid Juicy Compression Fitting 05-06
|
Avid Juicy Compression Fitting 05-06
|
Fits Avid Juicy disc brakes from model years 2005-06. Sold individually
|
|
CBO:
|
|
$1.49
|
|
msrp:$2.95
|
|
You save 49% |
|
|
|
|
Avid Juicy Compression Fitting 05-06
|
|
Avid Juicy Compression Nut
|
Avid Juicy Hydraulic Hose Kit
|
Avid Juicy Hydraulic Hose Kit
|
Avid Juicy Kit Disc Brake Hose Kit also fits XX.
Features:
* Fits XX, Juicy Ultimate, Juicy 5, Juicy 7
* Includes hardware
Specifications:
Hose Use: Front/Rear
Color: Black
Fits: Avid XX, Juicy
|
|
CBO:
|
|
$34.99
|
|
msrp:$40.00
|
|
You save 12%| |
|
|
|
|
Avid Juicy Hydraulic Hose Kit
|
|
Avid Juicy/XX Disc Brake Hose Kits
|
Avid Lever Pivot Pushrod Kit 07 Juicy
|
Avid Master Cylinder/Lever Assemblies
|
Avid Master Cylinder/Lever Assemblies
|
Includes: 1 complete brake-lever/master-cylinder assembly with lever blade (no hose or hose-mount fittings: sold separately). Flip-flop design: can be used for left or right. Newer-year models can be used to retrofit/upgrade older systems. Levers labeled as (MM) have a removable split clamp and are Match-Maker compatible (Match-Maker clamp kit sold separately).
|
|
CBO:
|
|
|
Avid Master Cylinder/Lever Assemblies
|
|
Avid Master Cylinder/Lever Parts
|
Avid Master Cylinder/Lever Parts
|
Lever-to-piston pushrods are listed under lever blades & pivot parts Elixir-CR pad contact adjuster is non-serviceable, use complete MC/lever replacement if needed (AV-5497)
|
|
CBO:
|
|
$25.90
|
|
msrp:$32.00
|
|
You save 19%| |
|
|
|
|
Avid Master Cylinder/Lever Parts
|
|
Avid Mechanical
|
Avid Mechanical
|
Avid Mechanical Brake Caliper Parts.
Features: - Contains one upper boot and one lower boot
|
|
CBO:
|
|
|
Avid Mechanical
|
|
Avid/SRAM MatchMaker-X Integrated Shifter Mount
|
Avid/SRAM MatchMaker-X Integrated Shifter Mount
|
Adapts 1-bolt band-clamp style Avid hydraulic brake levers to accept/integrate with SRAM XX, X.0, 2007+ X.9, and 2010+ X.7 trigger shifters onto one mounting perch Also integrates with the XX-model fork, XLoc remote compression/lockout control providing a three-way bar mount capability Fits Avid: 2010+ Elixir-CR Mag and XX brake models (for other Elixir or Avid brakes with a 2-bolt split clamp, use AV-4000 MatchMaker) Sold as a set or individually for left and/or right brake/shift+XLoc Avid/SRAM MatchMaker-X Integrated Shifter Mount Details...
|
|
CBO:
|
|
|
Avid/SRAM MatchMaker-X Integrated Shifter Mount
|
|
International Customers
Call 805-927-5510
