All Products /
Accessories /
Bags+Baskets+and+Racks All JANDD Parts JANDD Bike Racks and Baskets
Jandd Expedition Rear Rack
|
Jandd Expedition Rear Rack
|
The Expedition Rack is the rack of choice for cyclists who require exceptional durability and expanded size. Built from 3-8" 6061 aluminum stock, the Expedition Rack is intended to be used primarily with our Large Mountain and Expedition Panniers where additional rear clearance may be needed for large loads
|
|
CBO:
|
|
|
Jandd Expedition Rear Rack
|
|
Jandd Extreme Front Rack
|
Jandd Extreme Front Rack
|
The Jandd Extreme Front Rack is the only equipment to reach for when front panniers are a necessity. The 3-8" 6061 aluminum rod stock is double-welded for strength in the most adverse conditions, and the generous 6"-wide top plate ensures sufficient space for a Jandd Rac Pac or a compact sleeping bag. On the Extreme Front Rack panniers can be mounted low for stability or high if added clearance is desirable. Mounting is quick and easy due to innovative reverse inverted bottom armatures that allo Jandd Extreme Front Rack Details...
|
|
CBO:
|
|
|
Jandd Extreme Front Rack
|
|
Jandd Lite Duty Rear Rack
|
Jandd Lite Duty Rear Rack
|
The Lite Duty Rack is designed for the budget-minded cyclist who desires a high quality rack at a reduced price. The frame on this rack, exceeding most competitors expedition standards, is made from 5-16" 6061 aluminum stock, increased to 3-8" for the main support strut for added strength. Not intended for heavy-duty touring or off-road use, the Lite Duty Rack is perfect for light commuting and across-town jaunts
|
|
CBO:
|
|
|
Jandd Lite Duty Rear Rack
|
|
Jandd Low Front Rack Blk
|
Jandd Low Front Rack Blk
|
The Jandd Low Front utilizes a uniquely simple design comprised of a single 3-8" 6061 aluminum rod that forms the entire main frame of the rack. Reverse inverted attachment armatures are double-welded at their bases for easy mounting to the lower fork eyelets. Slotted mounting tracks near the top of the rack allow for easy adaptation to almost any fork configuration. All stress points are double-welded.
Weight-26.5 oz-752 g Length-13.25 in-34 cm Height-(Overall) 14 in-35.5 cm Height-Pannier M Jandd Low Front Rack Blk Details...
|
|
CBO:
|
|
|
Jandd Low Front Rack Blk
|
|
Jandd Mountain Handle Pac 1 Bike Bag
|
Jandd Mountain Handle Pac 1 Bike Bag
|
Jandd Mountain Handle Pack 1
* Designed to mount facing the rider
* Three-point webbing and buckle attachment
* Mounts to stem for easy access
* Needs 3" minimum stem length
* 7" x 10" x 4"
* 190g
* Made with durable Dupont Cordura
|
|
CBO:
|
|
|
Jandd Mountain Handle Pac 1 Bike Bag
|
|
Jandd Mountain Rack Blk
|
Jandd Mountain Rack Blk
|
The 6" top width fits Jandd Rack Packs perfectly, and the 3" extended bottom rail and two vertical struts are in the same plane to form the optimal pannier deflection angle for a perfect pannier fit. All stress points are double-welded; all hardware is stainless steel.
Weight-28.8 oz-816 g Length-13.25 in-34 cm Height-(Overall) 14 in-35.5 cm Height-Pannier Mounting 12 in-30.5 cm Width-6 in-15.25 cm WEIGHT CAPACITY 40 LBS
|
|
CBO:
|
|
|
Jandd Mountain Rack Blk
|
|
Jandd Rack Bungee
|
Jandd Rack Bungee
|
Hold down your load with a super strong Jandd Bungee. Made with flat braided elastic for better load control. Each strap is made up of 2 lengths of bungee so the load is held front and backwith 1 strap. Fits all Jandd rear racks and the Extreme front rack. Also fits most other racks
|
|
CBO:
|
|
|
Jandd Rack Bungee
|
|
Jandd Rack Clamp
|
Jandd Rack Clamp
|
These clamps are used to mount racks to bikes without braze-on points. Available in pairs
|
|
CBO:
|
|
|
Jandd Rack Clamp
|
|
International Customers
Call 805-927-5510
