All Products /
Tools+and+Lubricants All PARK TOOL Parts PARK TOOL Brake and Cable Tools
Park Tool Bt-2 Fourth Hand Cable Stretcher
|
Park Tool Bt-2 Fourth Hand Cable Stretcher
|
The Park BT-2 is commonly referred to as a 4th Hand, the Park Tool Cable Stretcher pulls cables tight. The BT-2 features one-hand operation with a thumb lock to hold the cable tight while your hand is removed to tighten pull-up bolts and nuts. The BT-2 Fourth Hand is made from heat treated steel, chrome plated, and featuring cushion grips for comfort. A must for any shop, home or professional
|
|
CBO:
|
|
$39.95
|
|
msrp:$43.95
|
|
You save 9%| |
|
|
|
|
Park Tool Bt-2 Fourth Hand Cable Stretcher
|
|
Park Tool Cbw-1 8-10Mm Metric Wrench
|
Park Tool Cbw-1 8-10Mm Metric Wrench
|
Park's CBW-1 is an 8mm open and 10mm open end wrench. This small, nickel plated wrench can be used on brakes, derailleurs, etc. Hole in wrench allows easy hanging on peg board
|
|
CBO:
|
|
$5.29
|
|
msrp:$5.79
|
|
You save 8%| |
|
|
|
|
Park Tool Cbw-1 8-10Mm Metric Wrench
|
|
Park Tool Cbw-4 9-11Mm Metric Wrench
|
Park Tool Cbw-4 9-11Mm Metric Wrench
|
Park's CBW-4 is an 9mm open and 11mm open end wrench. This small, nickel plated wrench can be used on brakes, derailleurs, etc. Hole in wrench allows easy hanging on peg board
|
|
CBO:
|
|
$5.29
|
|
msrp:$5.79
|
|
You save 8%| |
|
|
|
|
Park Tool Cbw-4 9-11Mm Metric Wrench
|
|
Park Tool Cn-10 Cable And Housing Cutter
|
Park Tool Cn-10 Cable And Housing Cutter
|
Park's CN-10 Cable and Housing Cutter is a shop quality cutter designed specifically for use on all bicycle cables and housing, including hard-to-cut index housing. The CN-10 has cold forged, heat treated steel handles for strength and precision ground cutting jaws for a clean cut on every cable. Dual density molded grips are specially contoured for superior comfort and control. Park's CN-10 has a built in crimper for cable end caps and a forming hole for reforming housing ends and housing ferru Park Tool Cn-10 Cable And Housing Cutter Details...
|
|
CBO:
|
|
$34.49
|
|
msrp:$37.95
|
|
You save 9%| |
|
|
|
|
Park Tool Cn-10 Cable And Housing Cutter
|
|
Park Tool Dt-1 Disc Mount Facing Tool
|
Park Tool Dt-1 Disc Mount Facing Tool
|
In order to ensure disc brakes function smoothly and accurately, the frames mounting tabs must be parallel with the brake pads and rotor. Park's DT-1 disc mount facing tool is designed to perfectly machine the face of each tab, removing paint and material to create a flat surface
|
|
CBO:
|
|
$144.95
|
|
msrp:$159.95
|
|
You save 9%| |
|
|
|
|
Park Tool Dt-1 Disc Mount Facing Tool
|
|
Park Tool Dt-2 Rotor Truing Fork
|
Park Tool Dt-2 Rotor Truing Fork
|
Specially designed, and preciesely manufactured to gently adjust bent or damaged brake rotors. Each DT-2 features two different slot depths laser cut from high quality stainless steel. Centered handle is vinyl dipped for comfort
|
|
CBO:
|
|
$16.73
|
|
msrp:$18.59
|
|
You save 10%| |
|
|
|
|
Park Tool Dt-2 Rotor Truing Fork
|
|
Park Tool Dt-3 Rotor Truing Gauge
|
Park Tool Dt-3 Rotor Truing Gauge
|
The Park DT-3 Rotor Truing Gauge accurately measures the straightness of disc brake rotors while the wheel is mounted in a TS-2 Professional Wheel Truing Stand. The DT-3 features an infinitely adjustable, finely threaded indicator gauge. Works with any diameter brake rotor
|
|
CBO:
|
|
$40.46
|
|
msrp:$44.95
|
|
You save 9%| |
|
|
|
|
Park Tool Dt-3 Rotor Truing Gauge
|
|
Park Tool Dt-3I Dial Indicator Kit For Dt-3
|
Park Tool Dt-3I Dial Indicator Kit For Dt-3
|
A dial indicator kit that bolts to the DT-3, allowing for greater accuracy and a way to measure and quantify results
|
|
CBO:
|
|
$40.46
|
|
msrp:$44.95
|
|
You save 9%| |
|
|
|
|
Park Tool Dt-3I Dial Indicator Kit For Dt-3
|
|
Park Tool Ph-T25 P-Handled T25 Torx Wrench
|
Park Tool Ph-T25 P-Handled T25 Torx Wrench
|
Comfortable "P-handle" w-a genuine Bondhus brand T25 Torx Wrench on both the long shaft (for speed and short shaft (for high torque) of the wrench. Fits the bolt heads found on many disc brake calipers and rotors
|
|
CBO:
|
|
$7.95
|
|
msrp:$8.59
|
|
You save 7%| |
|
|
|
|
Park Tool Ph-T25 P-Handled T25 Torx Wrench
|
|
Park Tool Pp-1 Hydraulic Piston Press
|
Park Tool Pp-1 Hydraulic Piston Press
|
The unique, wedge-shaped PP-1 slides into a hydraulic disc brake caliper to pre-set the piston when replacing pads, aligning pads, and performing other service procedures. Makes hydraulic disc brake maintenance and repair faster and easier
|
|
CBO:
|
|
$18.95
|
|
msrp:$20.95
|
|
You save 9%| |
|
|
|
|
Park Tool Pp-1 Hydraulic Piston Press
|
|
International Customers
Call 805-927-5510
