All Products /
Tools+and+Lubricants All PARK TOOL Parts PARK TOOL Frame and Fork Tools
Park Tool 607 Fts-1 1 1/8" Cutting Die
|
![Park Tool 607 Fts-1 1 1/8]()
Park Tool 607 Fts-1 1 1/8" Cutting Die
|
This Park Tool 607 cutting die is designed to work with the Park Tool FTS-1 fork threading set
|
|
CBO:
|
|
$183.60
|
|
msrp:$204.00
|
|
You save 10%| |
|
|
|
|
Park Tool 607 Fts-1 1 1/8" Cutting Die
|
|
Park Tool 611 Fts-1 Fork Threading Guide
|
Park Tool 690 Replacement Facer
|
Park Tool 690 Replacement Facer
|
Park's 690 facing mill cutter has an outside diameter of approximately 45mm. Always use cutting fluid such as Park Tool CF-1 when machining. The 690 facer is designed to fit-HTR-1, HTR-1b, BFS-1, BTS-1
|
|
CBO:
|
|
$80.96
|
|
msrp:$89.95
|
|
You save 9%| |
|
|
|
|
Park Tool 690 Replacement Facer
|
|
Park Tool 690-XL Oversized Replacement Facer
|
Park Tool 690-XL Oversized Replacement Facer
|
The #690-XL is a larger version of the 690 facer for the HTR Headtube Facer and Reamer. It has a nominal outside diameter of 57mm. It may be used in conjunction with the 788 reamer. It is also used with the 767 Pilot or the 768 Pilot to face only the large diameter headstubes of the "low profile" ZS-type headsets.
NOTE: For sharpening services of cutting tools see Park Tool Sharpening Services. Always use cutting fluid such as Park Tool CF-2 when machining.
SHIS terminology: Th Park Tool 690-XL Oversized Replacement Facer Details...
|
|
CBO:
|
|
$178.20
|
|
msrp:$198.00
|
|
You save 10%| |
|
|
|
|
Park Tool 690-XL Oversized Replacement Facer
|
|
Park Tool Crc-1 Crown Race Cutting Tool
|
Park Tool Crc-1 Crown Race Cutting Tool
|
To insure proper headset performance and longevity, special attention must be given to accurately machine the fork's crown race seat. The CRC-1 is a professional quality machining tool for milling both the outer edge and lower surfaces of the crown race seat
|
|
CBO:
|
|
$479.95
|
|
msrp:$545.95
|
|
You save 12%| |
|
|
|
|
Park Tool Crc-1 Crown Race Cutting Tool
|
|
Park Tool Dag-2 Derailleur Hanger Alignment Gauge
|
Park Tool Dag-2 Derailleur Hanger Alignment Gauge
|
An updated version of the popular DAG-1, the new DAG-2 utilizes a longer measuring pointer, longer threaded stud and a longer, narrower alignment boss to fit a wider variety of bikes.
NOTE-The DAG-2 will phase out and replace the DAG-1
|
|
CBO:
|
|
$59.95
|
|
msrp:$67.95
|
|
You save 11%| |
|
|
|
|
Park Tool Dag-2 Derailleur Hanger Alignment Gauge
|
|
Park Tool Fag-2 Frame Alignment Guage
|
Park Tool Fag-2 Frame Alignment Guage
|
Many bicycles will not shift or track properly because the front and rear wheels are not in line with the frame. If these conditions still exist after wheel and derailleur adjustments, the seat stays, chain stays, and rear drop-outs of the frame may be misaligned
|
|
CBO:
|
|
$52.49
|
|
msrp:$58.32
|
|
You save 9%| |
|
|
|
|
Park Tool Fag-2 Frame Alignment Guage
|
|
Park Tool Ffg-2 Frame Fork Straightener
|
Park Tool Ffg-2 Frame Fork Straightener
|
Improperly aligned frame or fork dropouts can cause bent axles and quick release skewers, as well as tracking and shifting problems. The FFG-2 quickly determines whether rear frame or front fork dropouts are aligned and parallel. If an error is detected, long handles and comfortable molded grips afford plenty of leverage for straightening. These Park Tool gauges adjust to compensate for various hub widths from 100 to 160mm
|
|
CBO:
|
|
$86.95
|
|
msrp:$99.95
|
|
You save 13%| |
|
|
|
|
Park Tool Ffg-2 Frame Fork Straightener
|
|
Park Tool Ffs-2 Frame Fork Straightener
|
Park Tool Ffs-2 Frame Fork Straightener
|
The Park Tool FFS-2 Frame and Fork Straightener is a versatile and productive tool. The open hook design enables it to straighten not only frames and forks, but also cranks and handlebars. Vinyl coating on the hook and on the fulcrum pad protects painted surfaces. The hook has over 8" of adjustment. Reinforced to prevent flexing. Note-Many bicycles cannot be properly repaired or adjusted because their frames and forks are no longer true. With the high cost of new bicycles and replacement frames Park Tool Ffs-2 Frame Fork Straightener Details...
|
|
CBO:
|
|
$75.95
|
|
msrp:$82.95
|
|
You save 8%| |
|
|
|
|
Park Tool Ffs-2 Frame Fork Straightener
|
|
Park Tool Fts-1 Fork Threading Set
|
Park Tool Fts-1 Fork Threading Set
|
Park's FTS-1 Fork Threading Set is designed for cutting new threads and for chasing existing threads on fork columns that are not chromed. The FTS-1's expandable cutting dies are made from the highest quality high speed steel for precision cutting and long life
|
|
CBO:
|
|
$239.95
|
|
msrp:$279.95
|
|
You save 14%| |
|
|
|
|
Park Tool Fts-1 Fork Threading Set
|
|
Park Tool Hbh-2 Handle Bar Holder
|
Park Tool Hbh-2 Handle Bar Holder
|
The Handlebar Holder is designed to prevent the handlebar and front wheel from rotating when a bike is mounted in a Park Tool Repair Stand. Updated to fit handlebars with a diameter up to 32mm and oversized top tubes up to 50mm, the HBH-2 works on almost any road or mountain bike Velcro strap is included to attach the Handlebar Holder to the frame. Very useful for hydraulic brake work when raising the front end for line bleeding
|
|
CBO:
|
|
$17.95
|
|
msrp:$19.29
|
|
You save 6%| |
|
|
|
|
Park Tool Hbh-2 Handle Bar Holder
|
|
Park Tool Sg-1 Threaded Saw Guide
|
Park Tool Sg-1 Threaded Saw Guide
|
Park SG-1 Threaded Saw 1" Cutting Guide. Cut any fork quickly and easily with these handy fork stack cutting guides. Heat treated for long life, each guide cleans the freshly cut threads upon removal so headset parts install easily. Cut as little as 1mm from any fork
|
|
CBO:
|
|
$24.95
|
|
msrp:$29.95
|
|
You save 16%| |
|
|
|
|
Park Tool Sg-1 Threaded Saw Guide
|
|
Park Tool Sg-2 Threaded Saw Guide
|
Park Tool Sg-2 Threaded Saw Guide
|
Park SG-1 Threaded Saw 1-1-8" Cutting Guide. Cut any fork quickly and easily with these handy fork stack cutting guides. Heat treated for long life, each guide cleans the freshly cut threads upon removal so headset parts install easily. Cut as little as 1mm from any fork
|
|
CBO:
|
|
$24.95
|
|
msrp:$29.95
|
|
You save 16%| |
|
|
|
|
Park Tool Sg-2 Threaded Saw Guide
|
|
Park Tool Sg-6 Threadless Saw Guide
|
Park Tool Sg-6 Threadless Saw Guide
|
Park's SG-6 Threadless Saw Guide ensures a straight, clean cut on 1", 1-1-8", and 1-1 4" threadless forks. Simply clamp the SG-6 onto the fork and cut, letting the SG-6 guide the hacksaw blade. The SG-6s non scratching composite body incorporates steel threads and a steel reinforcing plate to withstand the rigors of heavy shop use
|
|
CBO:
|
|
$32.95
|
|
msrp:$37.95
|
|
You save 13%| |
|
|
|
|
Park Tool Sg-6 Threadless Saw Guide
|
|
Park Tool Tap-10 Rd Hanger Tap
|
Park Tool Tap-10 Rd Hanger Tap
|
Frame Taps will become a lifesaver at some time for virtually every mechanic. As with all Park Tool Taps, these are made of high carbon steel and are precision ground. Park Tool Frame Taps cut easily and fit conventional tap handles. 10mm x 1 for derailleur hanger
|
|
CBO:
|
|
$9.44
|
|
msrp:$10.49
|
|
You save 10%| |
|
|
|
|
Park Tool Tap-10 Rd Hanger Tap
|
|
Park Tool Tap-7 Frame Tap
|
Park Tool Tap-7 Frame Tap
|
Frame Taps will become a lifesaver at some time for virtually every mechanic. As with all Park Tool Taps, these are made of high carbon steel and are precision ground. Park Tool Frame Taps cut easily and fit conventional tap handles. 3mm x .5 for rear wheel drop-out alignment screws
|
|
CBO:
|
|
$8.95
|
|
msrp:$9.49
|
|
You save 5%| |
|
|
|
|
Park Tool Tap-7 Frame Tap
|
|
Park Tool Tap-8 Frame Tap
|
Park Tool Tap-8 Frame Tap
|
Frame Taps will become a lifesaver at some time for virtually every mechanic. As with all Park Tool Taps, these are made of high carbon steel and are precision ground. Park Tool Frame Taps cut easily and fit conventional tap handles. For water bottle, toe clip, fender and rack bosses
|
|
CBO:
|
|
$8.95
|
|
msrp:$9.49
|
|
You save 5%| |
|
|
|
|
Park Tool Tap-8 Frame Tap
|
|
Park Tool Tap-9 Frame Tap
|
Park Tool Tap-9 Frame Tap
|
Frame Taps will become a lifesaver at some time for virtually every mechanic. As with all Park Tool Taps, these are made of high carbon steel and are precision ground. Park Tool Frame Taps cut easily and fit conventional tap handles. 6mm x 1 for cantilever brakes and large fender bosses
|
|
CBO:
|
|
$8.06
|
|
msrp:$8.95
|
|
You save 9%| |
|
|
|
|
Park Tool Tap-9 Frame Tap
|
|
Park Tool Tns-15 Threadless Nut Setter
|
Park Tool Tns-15 Threadless Nut Setter
|
The TNS-15 is designed to install star-fangled nuts used specifically with 1 _ and 1.5 headset systems. To use, simply thread the nut onto the TNS-15 and tap into the forks steerer tube with a hammer (just like our popular TNS-1). The TNS-15 helps keep the nut straight and sets it to a depth of 15mm
|
|
CBO:
|
|
$34.16
|
|
msrp:$37.95
|
|
You save 9%| |
|
|
|
|
Park Tool Tns-15 Threadless Nut Setter
|
|
International Customers
Call 805-927-5510
