All Products /
Tools+and+Lubricants All PARK TOOL Parts PARK TOOL Headset Tools
Park Tool 758 Reaming And Facing Cutter
|
Park Tool 758 Reaming And Facing Cutter
|
The Park Tool 758-S set will ream and face the head tubes of bike using the "ONEPOINTFIVE Interface Standard". The cutter 758 is sized at 1.9516-inch (49.57mm) diameter. The cutter will bore a machined surface to a nominal one-inch depth (26mm) and then face the top of the headtube surface. The 758-S is designed for use with the Park Tool HTR-1 Headtube Facer and Reamer. The 758-S must also be used with the 750 Centering Cone Adaptor. The 750 will fit the large headtubes of the OnePointFive stan Park Tool 758 Reaming And Facing Cutter Details...
|
|
CBO:
|
|
|
Park Tool 758 Reaming And Facing Cutter
|
|
Park Tool 767 Facing Pilot Reaming And Facing Set
|
Park Tool 767 Facing Pilot Reaming And Facing Set
|
The #767 is used with the HTR-1 and 690XL facer when facing 1.5” head tubes with an inside diameter of 49.5mm, including those with an “hour glass” shaped head tube
|
|
CBO:
|
|
$20.66
|
|
msrp:$22.95
|
|
You save 9%| |
|
|
|
|
Park Tool 767 Facing Pilot Reaming And Facing Set
|
|
Park Tool Crp-1 Universal Crown Race Puller
|
Park Tool Crp-1 Universal Crown Race Puller
|
Park's CRP-1 is a precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork. Universal design works with 1", 1-1-8", 1-1-4" and 1.5 crown race-fork (suspension or rigid) combinations. The CRP-1 will accept steering columns up to 380mm.
To use, simply turn the two small T-handles to press the thin-edged wedges under the crown race. Then turn the large T-handle to completely pull the crown race from the fork. No more hammer and punch! All steel c Park Tool Crp-1 Universal Crown Race Puller Details...
|
|
CBO:
|
|
$149.95
|
|
msrp:$164.95
|
|
You save 9%| |
|
|
|
|
Park Tool Crp-1 Universal Crown Race Puller
|
|
Park Tool Crs-1 Crown Race Setting System
|
Park Tool Crs-1 Crown Race Setting System
|
Park's taken a fresh new approach to crown race installation. Traditionally, a mechanic would slam a tube down onto the bearing surface to set the race in place. The CRS-1 offers a different approach that offers faster, safer, and more precise installation. The bearing surface is spared a direct hit by using different inserts to ensure proper fit on the race. Choose the correct insert then slide the tube over the fork tube and into the top end of the insert. Using a hammer, tap firmly on the end Park Tool Crs-1 Crown Race Setting System Details...
|
|
CBO:
|
|
$76.46
|
|
msrp:$84.95
|
|
You save 9%| |
|
|
|
|
Park Tool Crs-1 Crown Race Setting System
|
|
Park Tool Crs-15 Crown Race Seter
|
Park Tool Crs-15 Crown Race Seter
|
The CRS-15 installs the bearing race on the 1.5" and 1-1/4" forks. The tool is updated to include two setting rings.
The bearing surface is spared a direct hit by using an aluminum inserts. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately
|
|
CBO:
|
|
$76.46
|
|
msrp:$84.95
|
|
You save 9%| |
|
|
|
|
Park Tool Crs-15 Crown Race Seter
|
|
Park Tool Hcw-15 Headset Wrench
|
Park Tool Hcw-15 Headset Wrench
|
The Park HCW-15 is a 32mm and 36mm head wrench. Park's popular and versatile Head Wrenches feature their proven Y head design and all headset wrench openings are lazer cut to ensure a tight, accurate fit. Precise sizing is achieved by high voltage computer controlled lazer technology after heat treat. Waiting until the wrench is heat treated eliminates shrinkage and expansion of the steel after the wrench is sized. It takes longer, and costs more, but its worth the extra effort
|
|
CBO:
|
|
$15.49
|
|
msrp:$16.95
|
|
You save 8%| |
|
|
|
|
Park Tool Hcw-15 Headset Wrench
|
|
Park Tool Hcw-6 Headset Pedal Wrench
|
Park Tool Hcw-6 Headset Pedal Wrench
|
Park's HCW-6 Headset Wrench ia a combination 32mm head wrench and 15mm pedal wrench. Park's popular and versatile Head Wrenches feature their proven Y head design and all headset wrench openings are lazer cut to ensure a tight, accurate fit. Precise sizing is achieved by high voltage computer controlled lazer technology after heat treat. Waiting until the wrench is heat treated eliminates shrinkage and expansion of the steel after the wrench is sized. It takes longer, and costs more, but its wor Park Tool Hcw-6 Headset Pedal Wrench Details...
|
|
CBO:
|
|
$13.95
|
|
msrp:$15.59
|
|
You save 10%| |
|
|
|
|
Park Tool Hcw-6 Headset Pedal Wrench
|
|
Park Tool Hcw-7 Headset Wrench
|
Park Tool Hcw-7 Headset Wrench
|
Park's HCW-7 is a headset wrench with 30mm and 32mm open ends. Our popular and versatile Head Wrenches feature our proven Y head design and all headset wrench openings are lazer cut to ensure a tight, accurate fit. Precise sizing is achieved by high voltage computer controlled lazer technology after heat treat. Waiting until the wrench is heat treated eliminates shrinkage and expansion of the steel after the wrench is sized. It takes longer, and costs more, but its worth the extra effort
|
|
CBO:
|
|
$16.95
|
|
msrp:$18.59
|
|
You save 8%| |
|
|
|
|
Park Tool Hcw-7 Headset Wrench
|
|
Park Tool Hcw-9 Headset Wrench
|
Park Tool Hcw-9 Headset Wrench
|
Park's HCW-9 is a headset wrench with 36mm and 40mm open ends. Park's popular and versatile Head Wrenches feature their proven Y head design and all headset wrench openings are lazer cut to ensure a tight, accurate fit. Precise sizing is achieved by high voltage computer controlled lazer technology after heat treat. Waiting until the wrench is heat treated eliminates shrinkage and expansion of the steel after the wrench is sized. It takes longer, and costs more, but its worth the extra effort
|
|
CBO:
|
|
$14.95
|
|
msrp:$16.59
|
|
You save 9%| |
|
|
|
|
Park Tool Hcw-9 Headset Wrench
|
|
Park Tool Hhp-2 Bearing Cup Press Tool
|
Park Tool Hhp-2 Bearing Cup Press Tool
|
Park's HHP-2 accurately aligns and presses 1", 1-1-8", 1-1-4", and 1.5" headset cups. In addition, it presses cartridge bearings and cups into one-piece bottom bracket shells and holds fixed cup wrenches firmly in place when removing or installing adjustable-type bottom brackets. Features a quick-release design for fast tool installation and removal, extra long (30cm) handles for superior leverage, and stepped bushings for precise cup alignment
|
|
CBO:
|
|
$139.95
|
|
msrp:$169.95
|
|
You save 17%| |
|
|
|
|
Park Tool Hhp-2 Bearing Cup Press Tool
|
|
Park Tool Hhp-3 Home Mech Bearing Cup Press
|
Park Tool Hhp-3 Home Mech Bearing Cup Press
|
Simple and economical, Park's HHP-3 Home Mechanic Bearing Cup Press is designed to install all sizes of head cups and one-piece bottom bracket cups
|
|
CBO:
|
|
$69.95
|
|
msrp:$79.95
|
|
You save 12%| |
|
|
|
|
Park Tool Hhp-3 Home Mech Bearing Cup Press
|
|
Park Tool Htr-1 Head Tube Reamer & Facer
|
Park Tool Htr-1 Head Tube Reamer & Facer
|
Proper frame preparation is very important. Park's HTR-1 combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. The HTR-1 comes complete with a 30.0mm reamer, and four different size pilots, (29.8mm, 30.0mm, 33.8mm, and 36.8mm)
|
|
CBO:
|
|
$449.95
|
|
msrp:$549.95
|
|
You save 18%| |
|
|
|
|
Park Tool Htr-1 Head Tube Reamer & Facer
|
|
Park Tool Htr-1B Head Tube Reamer & Facer
|
Park Tool Htr-1B Head Tube Reamer & Facer
|
Proper frame preparation is very important. Park's HTR-1B combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. The HTR-1B comes complete with a 33.8mm reamer, and four different size pilots, (29.8mm, 30.0mm, 33.8mm, and 36.8mm)
|
|
CBO:
|
|
$449.95
|
|
msrp:$549.95
|
|
You save 18%| |
|
|
|
|
Park Tool Htr-1B Head Tube Reamer & Facer
|
|
Park Tool Hw-2 Pro Headset Locknut Wrench
|
Park Tool Hw-2 Pro Headset Locknut Wrench
|
Most headset wrenches are too thin to use on the top locknut of headsets, particularly aluminum locknuts which can be marred and rounded off very easily. Park's HW-2 Professional Headset Locknut Wrench is the answer. It has a thick, semi-box opening and a substantial, extra long handle for a firm and precise grip on most 8 point 32mm and 36mm locknuts. Made of investment cast steel
|
|
CBO:
|
|
$34.95
|
|
msrp:$42.95
|
|
You save 18%| |
|
|
|
|
Park Tool Hw-2 Pro Headset Locknut Wrench
|
|
Park Tool Rt-1 Head Cup Remover
|
Park Tool Rt-1 Head Cup Remover
|
The Park Tool Head Cup Remover makes headset cup removal easy. The tool is pulled through the frame until the flared ends snap in behind the cup. A blow on the tool head removes the cup. Fits 1, 1-1-8 and 1-1-4 headsets. Strong, heat treated alloy steel with nickel finish.
|
|
CBO:
|
|
$29.95
|
|
msrp:$35.95
|
|
You save 16%| |
|
|
|
|
Park Tool Rt-1 Head Cup Remover
|
|
Park Tool Rt-2 Head Cup Remover
|
Park Tool Rt-2 Head Cup Remover
|
Designed for the 1-1-4 inch and 1-1-2 inch headest standards, the Park RT-2 Head Cup Remover makes headset cup removal easy. The tool is pulled through the frame until the flared ends snap in behind the cup. A blow on the tool head removes the cup. Strong, heat treated alloy steel with a nickel finish
|
|
CBO:
|
|
$29.95
|
|
msrp:$35.95
|
|
You save 16%| |
|
|
|
|
Park Tool Rt-2 Head Cup Remover
|
|
Park Tool Tns-4 Threadless Nut Setter
|
Park Tool Tns-4 Threadless Nut Setter
|
The TNS-4 makes it quick and easy to install star-fangled nuts used with 1 and 1-1-8 threadless headset systems. Using a durable steel driver and built-in guide, the TNS-4 perfectly aligns the star-fangled nut and sets it to the proper depth every time. The unique design virtually eliminates pinched fingers
|
|
CBO:
|
|
$34.95
|
|
msrp:$37.95
|
|
You save 7%| |
|
|
|
|
Park Tool Tns-4 Threadless Nut Setter
|
|
International Customers
Call 805-927-5510
