All Products /
Tools+and+Lubricants All PARK TOOL Parts PARK TOOL Misc Tools and Wrenches
Dummy Pedal
|
Dummy Pedal
|
The Dummy Pedal allows for easy adjustments. - The DP-3 Dummy Pedal quickly installs to take the place of a pedal when making adjustments during the assembly of these bikes
- Use of the DP-3 is much quicker than threading a pedal into the crank and then unthreading it after the bike is assembled
- Quickly installs to take the place of a pedal when making adjustments during bike assembly
- Use of the DP-3 is much quicker than threading a pedal into Dummy Pedal Details...
|
|
CBO:
|
|
$8.96
|
|
msrp:$9.95
|
|
You save 9%| |
|
|
|
|
Dummy Pedal
|
|
Park Hcw-11 Adjustable Cup Wrench
|
Park Hcw-11 Adjustable Cup Wrench
|
The HCW-11 fits "slotted" bottom bracket adjusting cups and cups with "raised" 16mm wrench flats. These are common on older English bicycles, and less expensive bicycles. The opposite end has two ears that are 23mm wide and approximately 5mm wide
|
|
CBO:
|
|
$14.95
|
|
msrp:$15.95
|
|
You save 6%| |
|
|
|
|
Park Hcw-11 Adjustable Cup Wrench
|
|
Park Tool 100-7X Extreme Range Clamp
|
Park Tool 100-7X Extreme Range Clamp
|
Park's most versatile clamp, the 100-7X fits all PRS-2, 3 and 4 repair stands (including OS models) and works on nearly any bike, no matter the size and shape of the frame tube.
Durable, screw-type adjustment system provides years of dependable service
Clamps round, square, rectangular and aero-shaped tubes from 7/8” to 4” (23mm to 102mm)
Quick release pivot system allows clamping of top and bottom or left and right sides of tube
Adjustable clamping pressure prevents damage to thin-w Park Tool 100-7X Extreme Range Clamp Details...
|
|
CBO:
|
|
$219.51
|
|
msrp:$243.90
|
|
You save 10%| |
|
|
|
|
Park Tool 100-7X Extreme Range Clamp
|
|
Park Tool 671 Handle Weldment - Bts-1
|
Park Tool 676 Handle Weldment W/Arbor - Bts-1
|
Park Tool 690-XXL Facing Cutter
|
Park Tool 690-XXL Facing Cutter
|
Used with #750 Centering Cone Adaptor and #789 Reamer or #790 Pilot when facing head tubes with 55.95 - 55.90mm I.D. and up to 65.0mm O.D. (“Internal” 1-1/2” ZS Standard)
|
|
CBO:
|
|
$242.91
|
|
msrp:$269.90
|
|
You save 10%| |
|
|
|
|
Park Tool 690-XXL Facing Cutter
|
|
Park Tool 751.2 30.10MM Reamer
|
Park Tool 751.2 30.10MM Reamer
|
Reams head tube I.D. to 30.10mm to accept headset cups with 30.20 to 30.30 O.D. (1” European traditional press fit standard)
|
|
CBO:
|
|
$120.42
|
|
msrp:$133.80
|
|
You save 10%| |
|
|
|
|
Park Tool 751.2 30.10MM Reamer
|
|
Park Tool 754.2 33.90MM Reamer
|
Park Tool 754.2 33.90MM Reamer
|
Reams head tube to 33.90mm I.D. to accept headset cups with 34.05 - 34.15mm O.D. (1-1/8” traditional press fit standard)
|
|
CBO:
|
|
|
Park Tool 754.2 33.90MM Reamer
|
|
Park Tool 758.2 49.59MM Reaming and Facing Cutter
|
Park Tool 758.2 49.59MM Reaming and Facing Cutter
|
Faces and reams head tube to 49.59mm I.D. to accept headset cups with 49.70 - 49.75mm O.D. (1-1/2” traditional press fit)
|
|
CBO:
|
|
$382.66
|
|
msrp:$425.18
|
|
You save 10%| |
|
|
|
|
Park Tool 758.2 49.59MM Reaming and Facing Cutter
|
|
Park Tool 788 43.95MM Reamer
|
Park Tool 788 43.95MM Reamer
|
Reams head tube I.D. to 43.95mm to accept “internal” headset cups with 44.05 - 44.10mm O.D. (1-1/8 ZS standard). Used with #690-XL Facing Cutter and #750 Centering Cone Adaptor
|
|
CBO:
|
|
$140.49
|
|
msrp:$156.10
|
|
You save 10%| |
|
|
|
|
Park Tool 788 43.95MM Reamer
|
|
Park Tool 789 55.95MM Reamer
|
Park Tool 789 55.95MM Reamer
|
Reams head tube I.D. to 55.95mm to accept “internal” headset cups with 55.99 – 56.04 O.D. (1-1/2” ZS standard). Used with #690-XXL Facing Cutter and #750 Centering Cone Adaptor
|
|
CBO:
|
|
$171.70
|
|
msrp:$190.78
|
|
You save 10%| |
|
|
|
|
Park Tool 789 55.95MM Reamer
|
|
Park Tool 790 55.9MM Pilot
|
Park Tool 790 55.9MM Pilot
|
Used with the 690-XXL Facing Cutter and #750 Centering Cone Adaptor when facing head tubes with 55.95 – 55.90mm I.D. (“Internal” 1-1/2” ZS standard)
|
|
CBO:
|
|
$30.82
|
|
msrp:$34.24
|
|
You save 9%| |
|
|
|
|
Park Tool 790 55.9MM Pilot
|
|
Park Tool Aws-1 3-Way Hex Wrench
|
Park Tool Aws-1 3-Way Hex Wrench
|
Park Tool introduced the bicycle industry to the 3-way Hex Wrench Set more than 20 years ago. Park's latest versions are stronger and more comfortable than ever. They fit perfectly in the palm of the hand and provide tremendous leverage. Hexes are made from Bondhus Protanium high torque industrial steel and are heattreated for long life. Tips of hexes are chamfered for a perfect fit. 4mm, 5mm, and 6mm hex set
|
|
CBO:
|
|
$8.49
|
|
msrp:$8.95
|
|
You save 5%| |
|
|
|
|
Park Tool Aws-1 3-Way Hex Wrench
|
|
Park Tool Aws-10 Fold-Up Hex Wrench Set
|
Park Tool Aws-10 Fold-Up Hex Wrench Set
|
Park Tool Fold Up Hex Wrench Sets use a multi position composite handle that is comfortable, lightweight, slip-resistant, and 40% stronger than steel handles. Hexes have chamfered tips for a perfect fit and are made from Bondhus Protanium high torque industrial steel for long life.
1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, and 6mm Hex Wrench Set
|
|
CBO:
|
|
$7.95
|
|
msrp:$8.49
|
|
You save 6%| |
|
|
|
|
Park Tool Aws-10 Fold-Up Hex Wrench Set
|
|
Park Tool Aws-11 Fold-Up Hex Wrench Set
|
Park Tool Aws-11 Fold-Up Hex Wrench Set
|
Park Tool Fold Up Hex Wrench Sets use a multi position composite handle that is comfortable, lightweight, slip-resistant, and 40% stronger than steel handles. Hexes have chamfered tips for a perfect fit and are made from Bondhus Protanium high torque industrial steel for long life. 3mm, 4mm, 5mm, 6mm, 8mm, and 10mm Hex Wrench Set
|
|
CBO:
|
|
$11.95
|
|
msrp:$13.29
|
|
You save 10%| |
|
|
|
|
Park Tool Aws-11 Fold-Up Hex Wrench Set
|
|
Park Tool Aws-3 3-Way Hex Wrench
|
Park Tool Aws-3 3-Way Hex Wrench
|
Park Tool introduced the bicycle industry to the 3-way Hex Wrench Set more than 20 years ago. Our latest versions are stronger and more comfortable than ever. They fit perfectly in the palm of the hand and provide tremendous leverage. Hexes are made from Bondhus Protanium high torque industrial steel and are heattreated for long life. Tips of hexes are chamfered for a perfect fit. AWS-3 has 2, 2.5, and 3mm
|
|
CBO:
|
|
$7.95
|
|
msrp:$8.59
|
|
You save 7%| |
|
|
|
|
Park Tool Aws-3 3-Way Hex Wrench
|
|
Park Tool Aws-8 3-Way Hex Wrench
|
Park Tool Aws-8 3-Way Hex Wrench
|
Park Tool introduced the bicycle industry to the 3-way Hex Wrench Set more than 20 years ago. Our latest versions are stronger and more comfortable than ever. They fit perfectly in the palm of the hand and provide tremendous leverage. Hexes are made from Bondhus Protanium high torque industrial steel and are heattreated for long life. Tips of hexes are chamfered for a perfect fit. AWX-8 is a 4mm, 5mm, and 6mm hex set
|
|
CBO:
|
|
$9.95
|
|
msrp:$10.69
|
|
You save 6%| |
|
|
|
|
Park Tool Aws-8 3-Way Hex Wrench
|
|
Park Tool BX-2 BLUE BOX TOOL CASE
|
Park Tool BX-2 BLUE BOX TOOL CASE
|
The BX-2 uses a super tough HDPE plastic shell that is nearly indestructible. This is a professional level lockable travel tool case customized to work specifically with bicycle tools. Each specially designed tool pallet is housed in a super tough, dent proof tool case designed and built for daily use.
* Dent proof molded composite shell
* Strong anodized aluminum frame
* Removable tool boards made with tough, durable 600D ballistic nylon sewn to an ABS inner panel
* Park Tool BX-2 BLUE BOX TOOL CASE Details...
|
|
CBO:
|
|
$224.95
|
|
msrp:$249.95
|
|
You save 10%| |
|
|
|
|
Park Tool BX-2 BLUE BOX TOOL CASE
|
|
Park Tool BxB-2 Backpack Harness For Bx-2 And Ek-1
|
Park Tool BxB-2 Backpack Harness For Bx-2 And Ek-1
|
A comfortable backpack system for carrying the BX-2 Blue Box Tool Case. Padded shoulder, waist and chest straps. Handy accessory pouches. Fully adjustable.
Specially designed to carry the Blue Box on your back. The BXB-2 is a well-built, secure and comfortable backpack system complete with padded shoulder straps, handy accessory pouches, plus waist and chest straps. The BXB-2 is fully adjustable and set up is quick and easy.
NOTE: THe BXB-2 will fit the BX-2 and previous BX-1 B Park Tool BxB-2 Backpack Harness For Bx-2 And Ek-1 Details...
|
|
CBO:
|
|
$89.95
|
|
msrp:$99.95
|
|
You save 10%| |
|
|
|
|
Park Tool BxB-2 Backpack Harness For Bx-2 And Ek-1
|
|
Park Tool CSB-1 Carbon Cutting Saw Blade
|
Park Tool CSB-1 Carbon Cutting Saw Blade
|
12” Tungsten steel hacksaw blade specially designed to smoothly cut carbon composite handlebars, forks, seat masts, seat posts, etc. Fits Park Tool SAW-1 Hacksaw and most 12” hacksaws
|
|
CBO:
|
|
$7.64
|
|
msrp:$8.49
|
|
You save 10%| |
|
|
|
|
Park Tool CSB-1 Carbon Cutting Saw Blade
|
|
Park Tool CT-6.2C Folding Chain Tool
|
Park Tool CT-6.2C Folding Chain Tool
|
The CT-6.2 works like a shop chain tool but folds compactly for taking on the road or trail. Features a cast steel body, stainless steel case, replaceable pin (part # 985-1C), and loosening shelf for tight links. The fold-out handles provide superior leverage to push chain rivets in and out easily. Works on 5 to 10-speed derailleur chains. Carded
|
|
CBO:
|
|
$20.24
|
|
msrp:$22.49
|
|
You save 10%| |
|
|
|
|
Park Tool CT-6.2C Folding Chain Tool
|
|
Park Tool Dc-1 Digital Caliper
|
Park Tool Dc-1 Digital Caliper
|
Accurately measures seat posts, head tubes, bearings, spoke diameters, etc. The DC-1 is a precision instrument built with stainless steel mechanisms and a rugged ABS composite body. The tools ability to measure in metric, decimal standard, and fractional standard make it an indispensable shop tool
|
|
CBO:
|
|
$44.95
|
|
msrp:$49.95
|
|
You save 10%| |
|
|
|
|
Park Tool Dc-1 Digital Caliper
|
|
Park Tool Ds-1 Digital Scale
|
Park Tool Ds-1 Digital Scale
|
A versatile digital scale built to accurately weigh bikes, frames, and components. Uniquely designed to be clamped solidly into a repair stand or hung from a hook or branch. Measures in both pounds and kilograms to the tenth and includes a dual position, silicone coated hanging hook
|
|
CBO:
|
|
$59.95
|
|
msrp:$66.95
|
|
You save 10%| |
|
|
|
|
Park Tool Ds-1 Digital Scale
|
|
Park Tool Ds-2 Table Top Digital Scale
|
Park Tool Ds-2 Table Top Digital Scale
|
This highly accurate tabletop scale is perfect for weighing small parts and components in grams or ounces
|
|
CBO:
|
|
$30.60
|
|
msrp:$34.00
|
|
You save 10%| |
|
|
|
|
Park Tool Ds-2 Table Top Digital Scale
|
|
Park Tool DT-4 Post Mount Facing Tool
|
Park Tool DT-4 Post Mount Facing Tool
|
Engineered and built to accurately face frame and fork mounted disc brake posts. The DT-4 machines the posts parallel with each other, perpendicular to the rotor and to an equal height. Includes axles for quick release hubs, as well as spacer adaptors for 12, 15 and 20mm thru axles
|
|
CBO:
|
|
$222.26
|
|
msrp:$246.95
|
|
You save 9%| |
|
|
|
|
Park Tool DT-4 Post Mount Facing Tool
|
|
Park Tool ES-1 Event Stand
|
Park Tool ES-1 Event Stand
|
A versatile, stable, multi-purpose storage rack built to hold up to twelve bikes by the nose of the saddle. Perfect for events, races or sidewalk storage, the ES-1 disassembles and folds easily for compact storage. Includes two height adjustable tripod uprights, two 47” (119cm) support tubes, and one connector sleeve. The ES-1 is approximately eight feet long but can be extended in length with the use of ES-2 Event Stand Add on Kits
|
|
CBO:
|
|
$323.96
|
|
msrp:$359.95
|
|
You save 9%| |
|
|
|
|
Park Tool ES-1 Event Stand
|
|
Park Tool ES-2 Event Stand Add-on Kit
|
Park Tool ES-2 Event Stand Add-on Kit
|
The ES-2 extends the length of the ES-1 Event Stand by eight feet. Includes one height adjustable tripod upright, two 47” (119cm) support tubes, and one connector sleeve
|
|
CBO:
|
|
$215.96
|
|
msrp:$239.95
|
|
You save 9%| |
|
|
|
|
Park Tool ES-2 Event Stand Add-on Kit
|
|
Park Tool Hmr-4 Shop Hammer
|
Park Tool Hmr-4 Shop Hammer
|
Park designed the perfect shop hammer!
The HMR-4 has a fiberglass shaft, a soft touch rubber grip, and a two-sided head—steel on one side and a replaceable plastic head (part #293) on the other side.
|
|
CBO:
|
|
$17.95
|
|
msrp:$19.95
|
|
You save 10%| |
|
|
|
|
Park Tool Hmr-4 Shop Hammer
|
|
Park Tool Ht-10 Hex Tool
|
Park Tool Ht-10 Hex Tool
|
Specially designed for cranks, including the Campagnolo Ultra-Torque, the HT-10 is built for speed, leverage and comfort. Our dual density, ergonomically designed screwdriver handle molded over an extra long, extra deep, super strong hex. It may be your new favorite tool
|
|
CBO:
|
|
$10.49
|
|
msrp:$10.95
|
|
You save 4%| |
|
|
|
|
Park Tool Ht-10 Hex Tool
|
|
Park Tool Ht-6 Hex Tool
|
Park Tool Ht-6 Hex Tool
|
Specially designed for pedals the HT-6 is built for speed, leverage and comfort. Our dual density, ergonomically designed screwdriver handle molded over an extra long, extra deep, super strong hex. It may be your new favorite tool
|
|
CBO:
|
|
|
Park Tool Ht-6 Hex Tool
|
|
Park Tool Ht-8 Hex Tool
|
Park Tool Ht-8 Hex Tool
|
Specially designed for cranks and pedals the HT-8 tool is built for speed, leverage and comfort. Our dual density, ergonomically designed screwdriver handle molded over an extra long, extra deep, super strong hex. It may be your new favorite tool
|
|
CBO:
|
|
|
Park Tool Ht-8 Hex Tool
|
|
Park Tool Ib-1 I-Beam Hex Wrench Screw Set
|
Park Tool Ib-1 I-Beam Hex Wrench Screw Set
|
Perfect for taking on rides, the strong, compact, lightweight IB-1 features Park's unique I-Beam handle surrounded by 3, 4, 5, 6 and 8mm hex wrenches and a straight blade screwdriver
|
|
CBO:
|
|
$13.95
|
|
msrp:$15.49
|
|
You save 9%| |
|
|
|
|
Park Tool Ib-1 I-Beam Hex Wrench Screw Set
|
|
Park Tool IB-11C Low Profile I-Beam Mini Tool
|
Park Tool IB-11C Low Profile I-Beam Mini Tool
|
The IB-11 features the same tools as the IB-1 I-Beam Mini Tool, but in a slimmer, lighter (28% lighter), more compact version. Each micro-sized hex bit is forged for strength and then bolted solidly to our forged I-beam center beam. 3, 4, 5, 6 and 8mm hex wrenches and a straight blade screwdriver. Weight: 66 grams
|
|
CBO:
|
|
$19.95
|
|
msrp:$21.95
|
|
You save 9%| |
|
|
|
|
Park Tool IB-11C Low Profile I-Beam Mini Tool
|
|
Park Tool IB-12C Low Profile I-Beam Mini Tool
|
Park Tool IB-12C Low Profile I-Beam Mini Tool
|
The slimmer, lighter, more compact version of the IB-2 I-Beam Mini Tool. 2, 2.5, 3, 4, 5, 6 and 8mm forged hex wrenches, T25 Torx® compatible star-shaped driver, and a straight blade screwdriver. Weight: 79 grams
|
|
CBO:
|
|
$23.95
|
|
msrp:$25.95
|
|
You save 7%| |
|
|
|
|
Park Tool IB-12C Low Profile I-Beam Mini Tool
|
|
Park Tool Jh-1 Bench Top Small Parts Holder
|
Park Tool Jh-1 Bench Top Small Parts Holder
|
A great place to keep small parts, cable end caps, grease, and whatever else you can think of. Stainless steel construction with a clear acrylic hinged top and four removable bins. Parts not included. 12" x 5.5" x 3.5" (30.5cm x 14cm x 9cm)
|
|
CBO:
|
|
$27.95
|
|
msrp:$34.95
|
|
You save 20%| |
|
|
|
|
Park Tool Jh-1 Bench Top Small Parts Holder
|
|
Park Tool Mb-1 Magnetic Parts Bowl
|
Park Tool Mb-1 Magnetic Parts Bowl
|
This bench top accessory keeps small parts accessible and all in one place. 6 (15cm) in diameter and featuring an extra strong magnet, Park's MB-1 Magnetic Parts Bowl is available only in World Famous Park Tool Blue
|
|
CBO:
|
|
|
Park Tool Mb-1 Magnetic Parts Bowl
|
|
Park Tool NP-6 Needle Nose Pliers
|
Park Tool NP-6 Needle Nose Pliers
|
Professional quality 6” needle nose pliers with five different crimping/grasping areas and a cutting blade. Forged, heat-treated cro-moly steel with an invisible spring and soft touch dual density grips
|
|
CBO:
|
|
$22.95
|
|
msrp:$24.95
|
|
You save 8%| |
|
|
|
|
Park Tool NP-6 Needle Nose Pliers
|
|
Park Tool P-Handle Hex Wrench
|
Park Tool P-Handle Hex Wrench
|
These thoughtfully designed Park P-handled hex wrenches fit the task at hand, as well as they fit in your hand. The long shaft of each wrench is fitted with a Bondhus Balldriver for those hard to reach bolt heads. The short end of the wrench is neatly chamfered and extends from the handle for use when fully tightening bolts in high torque applications. Shaft lengths are optimally selected to minimize the wind-up and flex experienced with longer wrenches. The hex wrenches are made from Bondhus Pr Park Tool P-Handle Hex Wrench Details...
|
|
CBO:
|
|
$12.95
|
|
msrp:$13.49
|
|
You save 4%| |
|
|
|
|
Park Tool P-Handle Hex Wrench
|
|
Park Tool Paw-12 Adjustable Wrench
|
Park Tool Paw-12 Adjustable Wrench
|
Big and powerful, Park Tool's PAW-12 is forged from carbon steel and chrome plated. Features a comfortable vinyl dipped handle. Jaws open to 36mm and feature a laser engraved measurement scale
|
|
CBO:
|
|
$29.95
|
|
msrp:$33.95
|
|
You save 11%| |
|
|
|
|
Park Tool Paw-12 Adjustable Wrench
|
|
Park Tool Ph-1 P-Handled Hex Wrench Set
|
Park Tool Ph-1 P-Handled Hex Wrench Set
|
All the wrenches fit neatly in the included bench mount-wall mount holder. Set includes 2, 2.5, 3, 4, 5, 6, 8, and 10mm Hex Wrenches. 10mm is for use on crank bolts and freehubs using a 10mm socket. Long shaft of each wrench is fitted with a Bondhus Balldriver for those hard to reach bolt heads
|
|
CBO:
|
|
$58.95
|
|
msrp:$64.95
|
|
You save 9%| |
|
|
|
|
Park Tool Ph-1 P-Handled Hex Wrench Set
|
|
Park Tool Ph-T1 P-Handled Star Shaped Wrench Set
|
Park Tool Ph-T1 P-Handled Star Shaped Wrench Set
|
A set of professional quality, star-shaped wrenches to fit Torx®-style fasteners. The wrenches are made from through-hardened, high torque industrial steel for long life and sized for a precision fit. The offset “P” handles are made from durable nylon and are ergonomically designed for comfortable use
|
|
CBO:
|
|
$42.95
|
|
msrp:$46.95
|
|
You save 8%| |
|
|
|
|
Park Tool Ph-T1 P-Handled Star Shaped Wrench Set
|
|
Park Tool Rr-12C Tape Measure
|
Park Tool Rr-12C Tape Measure
|
Small and handy, the RR-12 features a tough, composite housing and both Metric and English readings up to 12 feet (3.65 M)
|
|
CBO:
|
|
|
Park Tool Rr-12C Tape Measure
|
|
Park Tool Sa-1 Shop Apron
|
Park Tool Sa-1 Shop Apron
|
Protect your clothing and use the large pouch pockets for storage when you work on your bike. Full length, shop quality apron is made of heavy-duty 7 oz. poly cotton twill. Navy blue with an embroidered logo
|
|
CBO:
|
|
$18.95
|
|
msrp:$19.95
|
|
You save 5%| |
|
|
|
|
Park Tool Sa-1 Shop Apron
|
|
Park Tool Sa-3 Heavy Duty Shop Apron
|
Park Tool Sa-3 Heavy Duty Shop Apron
|
Once you try on this apron, there's no going back to standard aprons. Park's SA-3 Heavy Duty Shop Apron is made from heavy 10 oz. cotton canvas and has two rows of bar tack reinforced pockets for stashing pens, parts, tools, etc. The special crossback design removes pressure from the neck for all day comfort. A nylon quick release makes the apron easy to adjust and take off. A full 35" in length, the bottom 7" of the apron can be snapped up for a custom height fit. An embroidered Park Tool logo Park Tool Sa-3 Heavy Duty Shop Apron Details...
|
|
CBO:
|
|
$22.95
|
|
msrp:$25.49
|
|
You save 9%| |
|
|
|
|
Park Tool Sa-3 Heavy Duty Shop Apron
|
|
Park Tool Saw-1 Hacksaw
|
Park Tool Saw-1 Hacksaw
|
Aluminum die cast frame construction, blade tension adjuster and comfortable handle make this the perfect hacksaw for the shop. SAW-1 includes one blade and accepts any 12" (300mm) hacksaw blade
|
|
CBO:
|
|
$19.95
|
|
msrp:$22.95
|
|
You save 13%| |
|
|
|
|
Park Tool Saw-1 Hacksaw
|
|
Park Tool Sbs-1 Socket And Bit Set
|
Park Tool Sbs-1 Socket And Bit Set
|
The SBS-1 is a shop quality set of sockets, hex bits and Torx style bits for the bike mechanic. Ideal for use with Park Tool Torque Wrenches, the SBS-1s 3-8 drive bits and sockets are made from tough, chrome vanadium steel for long life. Includes-
-3, 4, 5, 6, 8 and 10mm hex bits
-T25, T30 and T40 Torx style bits
-8, 9, 10, 11, 12, 13, 14, 15mm and 1 sockets (The 1 socket fits various Park Tool Freewheel, Cassette Lockring, and Bottom Bracket tools)
-Convenient bit and socket holder
|
|
CBO:
|
|
$35.95
|
|
msrp:$39.49
|
|
You save 8%| |
|
|
|
|
Park Tool Sbs-1 Socket And Bit Set
|
|
Park Tool SCW-Set 2 Shop Cone Wrench Set
|
Park Tool SCW-Set 2 Shop Cone Wrench Set
|
Includes 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, and 28mm sizes
“Y” head design for strength and durability
Military grade industrial phosphate finish
Long, vinyl-dipped handle for leverage and comfort
|
|
CBO:
|
|
$59.95
|
|
msrp:$69.95
|
|
You save 14%| |
|
|
|
|
Park Tool SCW-Set 2 Shop Cone Wrench Set
|
|
Park Tool Sd-0 Shop #0 Phillips Screwdriver
|
Park Tool Sd-0 Shop #0 Phillips Screwdriver
|
Shop quality screwdriver designed for comfort and durability. Featuring dual density grips and heat-treated, chrome vanadium tips and shafts.
The 0 is a 1-8" shaft, for those small computer cross-tip screws and many hydraulic brake reservoir caps
|
|
CBO:
|
|
$4.49
|
|
msrp:$4.95
|
|
You save 9%| |
|
|
|
|
Park Tool Sd-0 Shop #0 Phillips Screwdriver
|
|
Park Tool Sd-2 Shop #2 Phillips Screwdriver
|
Park Tool Sd-2 Shop #2 Phillips Screwdriver
|
Shop quality screwdriver designed for comfort and durability. Featuring dual density grips and heat-treated, chrome vanadium tips and shafts. The 2 is a 1-4" shaft, perfect for derailleur adjustmenet screws. It is the most common cross tip ("Phillips") required
|
|
CBO:
|
|
$4.49
|
|
msrp:$4.95
|
|
You save 9%| |
|
|
|
|
Park Tool Sd-2 Shop #2 Phillips Screwdriver
|
|
Park Tool Sd-3 Flat Bladed Screwdriver
|
Park Tool Sd-3 Flat Bladed Screwdriver
|
Weve added a 3mm Flat Blade Screwdriver with the same comfortable handle and quality of the SD-0, SD-2 & SD-6
|
|
CBO:
|
|
$4.49
|
|
msrp:$4.95
|
|
You save 9%| |
|
|
|
|
Park Tool Sd-3 Flat Bladed Screwdriver
|
|
Park Tool Sd-6 Shop 6Mm Flat Screwdriver
|
Park Tool Sd-6 Shop 6Mm Flat Screwdriver
|
Shop quality screwdriver designed for comfort and durability. Featuring dual density grips and heat-treated, chrome vanadium tips and shafts
|
|
CBO:
|
|
$4.49
|
|
msrp:$4.95
|
|
You save 9%| |
|
|
|
|
Park Tool Sd-6 Shop 6Mm Flat Screwdriver
|
|
Park Tool Sd-Set Shop Screwdriver Set
|
Park Tool Sd-Set Shop Screwdriver Set
|
All four of our shop grade screwdrivers in one handy set. Includes the SD-0, SD-2, SD-3, and SD-6
|
|
CBO:
|
|
$16.49
|
|
msrp:$17.95
|
|
You save 8%| |
|
|
|
|
Park Tool Sd-Set Shop Screwdriver Set
|
|
Park Tool SG-7 2 Oversized Adjustable Saw Guide
|
Park Tool SG-7 2 Oversized Adjustable Saw Guide
|
Accurately guides a hacksaw to cut aero-shaped seat masts and seat posts up to 3.5” (89mm), as well as fork steerer tubes and other round tubes from 1-1/4” to 1-3/4” (32mm to 45mm). The SG-7.2 features two different cutting slots--standard and carbon cutting blade widths--in a hardened steel body with molded contact points to protect tubes and frames
|
|
CBO:
|
|
$37.95
|
|
msrp:$42.95
|
|
You save 11%| |
|
|
|
|
Park Tool SG-7 2 Oversized Adjustable Saw Guide
|
|
Park Tool SG-8 Threadless Saw Guide for Carbon Composite Forks
|
Park Tool SG-8 Threadless Saw Guide for Carbon Composite Forks
|
Specially designed to accommodate wider, carbon specific saw blades, the SG-8 Saw Guide ensures a straight, clean cut on fork steerer tubes up to 1-1/4
|
|
CBO:
|
|
$35.95
|
|
msrp:$43.95
|
|
You save 18%| |
|
|
|
|
Park Tool SG-8 Threadless Saw Guide for Carbon Composite Forks
|
|
Park Tool SP-7 Side Cutter Pliers
|
Park Tool SP-7 Side Cutter Pliers
|
Professional quality 7” diagonal/side cutting pliers with soft touch dual density grips. Made from forged, heat-treated, Cro-Moly steel
|
|
CBO:
|
|
$22.95
|
|
msrp:$24.95
|
|
You save 8%| |
|
|
|
|
Park Tool SP-7 Side Cutter Pliers
|
|
Park Tool SR-11 11 Speed Compatible Chain Whip/Sprocket Remover
|
Park Tool SR-11 11 Speed Compatible Chain Whip/Sprocket Remover
|
Chain fits all 5 to 11-speed cassettes and freewheels
Heat treated steel with molded handle for comfort
1" (25.4mm) box-end wrench fits Park Tool Freewheel/Cassette Lockring
|
|
CBO:
|
|
$26.49
|
|
msrp:$28.95
|
|
You save 8%| |
|
|
|
|
Park Tool SR-11 11 Speed Compatible Chain Whip/Sprocket Remover
|
|
Park Tool SR-18 Chain Whip for 1/8" Cogs
|
Park Tool SR-18 Chain Whip for 1/8" Cogs
|
Chain fits 1/8" fixed-gear sprockets
Heat treated steel with molded handle for comfort
1" (25.4mm) box end wrench fits Park Tool Freewheel/Cassette Lockring Tools
|
|
CBO:
|
|
$19.95
|
|
msrp:$21.95
|
|
You save 9%| |
|
|
|
|
Park Tool SR-18 Chain Whip for 1/8" Cogs
|
|
Park Tool SS-15C Single Speed Spanner
|
Park Tool SS-15C Single Speed Spanner
|
Designed and built especially for single speed bikes, the SS-15 is a forged, multi-purpose ride saver.Just the right size and length (17cm/7”) to take along or to wrench in the garage, the SS-15 is destined to be a single speeder’s favorite.
Includes:
* 15mm socket wrench for axle nuts
* 15mm open end wrench for pedals
* Tire lever
* Bottle opener
|
|
CBO:
|
|
$17.59
|
|
msrp:$19.49
|
|
You save 9%| |
|
|
|
|
Park Tool SS-15C Single Speed Spanner
|
|
Park Tool SW-16 3 Internal Nipple Spoke Wrench with 3/16" Socket
|
Park Tool SW-19 Internal Nipple Spoke Wrench with 6.0MM Socket
|
Park Tool Tool St-3 3 Way Socket Wrench
|
Park Tool Tool St-3 3 Way Socket Wrench
|
The three most common bolt and nut sizes are combined with the classic Park Tool 3-way Y body. 8mm, 9mm, and 10mm forged CR-V steel sockets
|
|
CBO:
|
|
$12.49
|
|
msrp:$13.79
|
|
You save 9%| |
|
|
|
|
Park Tool Tool St-3 3 Way Socket Wrench
|
|
Park Tool TS-25 Repair Stand Mounted Wheel Truing Stand
|
Park Tool TS-25 Repair Stand Mounted Wheel Truing Stand
|
Small, lightweight and accurate, the TS-25 Truing Stand securely holds any wheel using a quick release or threaded axle and adjusts for any wheel diameter and rim width. Installs and removes quickly and easily.
*Fits PRS-25, PCS-1, PCS-4 and PCS-10 Repair Stands
|
|
CBO:
|
|
$31.46
|
|
msrp:$34.95
|
|
You save 9%| |
|
|
|
|
Park Tool TS-25 Repair Stand Mounted Wheel Truing Stand
|
|
Park Tool Tw-1 Torque Wrench
|
Park Tool Tw-1 Torque Wrench
|
Because torque specifications are now given for most parts and accessories, Park Tool offers two tough, accurate torque wrenches. The TW-1 is 1-4" drive (includes 3-8 adaptor) and ranges from 0-60 inch pounds with compatible metric equivalents
|
|
CBO:
|
|
$39.95
|
|
msrp:$44.95
|
|
You save 11%| |
|
|
|
|
Park Tool Tw-1 Torque Wrench
|
|
Park Tool Tw-2 Torque Wrench
|
Park Tool Tw-2 Torque Wrench
|
Because torque specifications are now given for most parts and accessories, Park Tool offers two tough, accurate torque wrenches. The TW-2 is 3-8" drive and ranges from -600 inch pounds
|
|
CBO:
|
|
$44.95
|
|
msrp:$52.95
|
|
You save 15%| |
|
|
|
|
Park Tool Tw-2 Torque Wrench
|
|
Park Tool Tw-5 Click Type Torque Wrench
|
Park Tool Tw-5 Click Type Torque Wrench
|
With todays lightweight components, torque wrench use in the shop is no longer an optionits a must for every mechanic. The TW-5 is a high quality, ratcheting, click type torque wrenches that accurately measure and apply the proper amount of torque to a components threaded fastener(s)
|
|
CBO:
|
|
$105.95
|
|
msrp:$115.95
|
|
You save 8%| |
|
|
|
|
Park Tool Tw-5 Click Type Torque Wrench
|
|
Park Tool Tw-6 Click Type Torque Wrench
|
Park Tool Tw-6 Click Type Torque Wrench
|
With todays lightweight components, torque wrench use in the shop is no longer an optionits a must for every mechanic. The TW-6 is a high quality, ratcheting, click type torque wrenches that accurately measure and apply the proper amount of torque to a components threaded fastener(s)
|
|
CBO:
|
|
$119.95
|
|
msrp:$132.95
|
|
You save 9%| |
|
|
|
|
Park Tool Tw-6 Click Type Torque Wrench
|
|
Park Tool Tws-2 Torx Wrench Set
|
Park Tool Tws-2 Torx Wrench Set
|
The use of Star-shaped fittings on disc brakes, pedals, chainring bolts, etc. are becoming increasingly popular. The TWS-2 combines the wrench sizes currently being used on bicycle components (T7, T9, T10, T15, T20, T25, T27, T30 and T40) in a convenient fold-up set. Composite handle is extremely strong (stronger than steel handles), comfortable to use, and slip resistant
|
|
CBO:
|
|
$17.54
|
|
msrp:$19.49
|
|
You save 10%| |
|
|
|
|
Park Tool Tws-2 Torx Wrench Set
|
|
Park Tool TWS-3C Torx Compatible Three-Way Wrench
|
Park Tool Uk-1C Utility Knife
|
Park Tool Uk-1C Utility Knife
|
It folds, it cuts, it hangs on your belt and best of allits blue. Perfect for the shop, garage, toolbox or saddlebag. The UK-1 is a combination of aluminum and stainless steel and uses readily available hardware store utility knife blades. It also features a secure, quick-change blade system that locks open and closed
|
|
CBO:
|
|
$12.56
|
|
msrp:$13.95
|
|
You save 9%| |
|
|
|
|
Park Tool Uk-1C Utility Knife
|
|
Park Tool Ybh-1C Three Way Wrench Belt Holder
|
Park Tool Ybh-1C Three Way Wrench Belt Holder
|
The YBH-1 clips on a waistband, belt or pocket, keeping a mechanics favorite tool always within easy reach, ready for action. Securely holds any Park Tool three way wrench
|
|
CBO:
|
|
$5.36
|
|
msrp:$5.95
|
|
You save 9%| |
|
|
|
|
Park Tool Ybh-1C Three Way Wrench Belt Holder
|
|
International Customers
Call 805-927-5510
