|
|
|
by ODI
|
|
|
|
Odi Flight Control Riser Handle Bars and Bar EndsFeatures: Constructed from lightweight 7075 T6 aluminum with precision laser etched graphicsUse with OD-1051 or OD-1053 Wingtip Bar Extensions (sold separately) to customize the width of the bars by 25mm or 36mm
|
| CBO Price: $66.58 Save: $13.32 | |
|
|
|
|
by ODI
|
|
|
|
ODI Flight Control All Mountain StemsFeatures:Lightweight All Mountain stemExclusive Bar Positioning Clamping System eases installation and helps prevent stress risersVisual alignment marks match up with Flight Control handlebars for precise bar roll adjustmentConstructed from 6061 aluminum with precision machined graphics
|
| CBO Price: $88.25 Save: $17.65 | |
|
|
|
|
|
|
|
|
by ODI
|
|
|
|
Aluminum clamps secure the grip on both ends using hex wrench
Loosen pinch bolts and grips slide on or off with ease
130mm length for standard shift/brake setup (not for twist shifters = use 90mm replacement grip options for twist shifters)
Bonus pack includes Lock-On grips, clamps, and with new Snap Cap end plugs
|
| CBO Price: $24.92 Save: $5.03 | |
|
|
|
|
by ODI
|
|
|
|
ODI Rogue Grips are designed to meet the needs of extreme downhill riders, the Rogue combines an ultra soft grip with slip-free technology.Features:Lock Jaw clamps sold separatelyBonus pack includes grips, Lock Jaws, and end plugsSoft raised pads provide excellent shock absorptionTextured surface pattern helps keep you in control
|
| CBO Price: $14.92 - $26.33 Save up to: $5.27 | |
|
|
|
|
by ODI
|
|
|
|
ODI Yeti Grips feature an extra soft outer layer with large reversed logo padding to reduce numbness. Numerous Yeti logos on the reverse side of the grip provide an excellent gripping surface.Features:The Hard Core two-ply design is durable and comfortableDual-Ply design provides better adhesion to barsSuper soft outer layer absorbs vibrationRaised Logo pads provide extra tractionOpen end with push-in bar ends...>> more >>
|
| CBO Price: $14.92 - $26.33 Save up to: $5.27 | |
|
|
|
|
by ODI
|
|
|
|
ODI Attack Grips
|
| CBO Price: $9.00 Save: $1.80 | |
|
|
|
|
by ODI
|
|
|
|
Made from 6061 aluminum for durability and long lasting protection. Includes heavy duty hardware to eliminate weak points. Designed with the double sliding wedge system to accommodate a wide range of handlebar ID's. Machined pockets on inside of plug allow plug to nest on the handlebar for a more secure fit
|
| CBO Price: $18.25 Save: $3.65 | |
|
|
|
|
by ODI
|
|
|
|
Rigid plastic grip core interlocks with clamps on either end. Two sizes available: 130mm for standard, or 90mm for twist shifters. Includes end plugs
|
| CBO Price: $14.88 - $14.92 Save up to: $2.98 | |
|
|
|
|
by ODI
|
|
|
|
Enough clamp bolts for 4 clamps, plus one extra clamp bolt
|
|
|
|
|
by ODI
|
|
|
|
ODI Yeti Grips feature an extra soft outer layer with large reversed logo padding to reduce numbness. Numerous Yeti logos on the reverse side of the grip provide an excellent gripping surface.Features:The Hard Core two-ply design is durable and comfortableDual-Ply design provides better adhesion to barsSuper soft outer layer absorbs vibrationRaised Logo pads provide extra tractionOpen end with push-in bar ends...>> more >>
|
| CBO Price: $12.92 - $14.88 Save up to: $2.08 | |
|
|
|
|
by ODI
|
|
|
|
Iconic Vans Waffle sole pattern utilizing ODI's proprietary grip compounds
Provides exceptional feel and control in all conditions
Aluminum clamps secure the grip on both ends using hex wrench
Bonus pack includes Lock-On grips, clamps, and with new Snap Cap end plugs
|
| CBO Price: $26.95 - $27.85 Save up to: $3.10 | |
|
|
|
|
by ODI
|
|
|
|
NEW! Designed to meet the needs of extreme moutain bikers, the Ruffian MX Grip combines an ultra narrow knurled Ruffian surface pattern combined with a motocross inspired half-waffle pattern for a great all around grip
|
| CBO Price: $14.84 Save: $1.65 | |
|
|
|
|
by ODI
|
|
|
|
ODI Lock Jaw Grips
|
|
|
|
|
by ODI
|
|
|
|
ODI Ruffian grips have a rugged knurled pattern for maximum traction.Features:Lock Jaw clamps sold separatelyBonus pack includes grips, Lock Jaws, and end plugs
|
| CBO Price: $14.88 - $26.33 | |
|
|
|
|
by ODI
|
|
|
|
ODI Cross Trainer Grips
|
|
|
|
|
by ODI
|
|
|
|
The ODI Longneck ST is a classic grip with a ribbed pattern and an open end to accommodate end plugs.
Included Thug Plug end caps are black with a white ODI logoCollapsible ribbed pattern provides excellent shock-absorption and controlSingle-ply constructionOpen-end grips include black Thug Plug end caps with white ODI logos
Item SpecificationsColorBlackUnit of SalePairWeight115gLength143mmFlangeYesDefined ColorBlack...>> more >>
|
| CBO Price: $10.95 - $11.00 | |
|
|
|
|
by ODI
|
|
|
|
ODI Flight Control Direct Mount StemsFeatures:Constructed from 6061 aluminum with precision machined graphics and 0 degree riseFits 2005>current BoXXer, Fox 40, Dorado, and 2012+ 888 forksExclusive Bar Positioning Clamping System eases installation and helps prevent stress risersVisual alignment marks match up with Flight Control handlebars for precise bar roll adjustment.123g
|
| CBO Price: $94.92 Save: $18.98 | |
|
|
|
|
by ODI
|
|
|
|
Designed by Cameron Zink and manufactured using ODI's proprietary grip compounds
Aluminum clamps secure the grip on both ends using hex wrench
143mm length gives extra room for freeride maneuvers
Bonus pack includes Lock-On grips, clamps, and with new Snap Cap end plugs
|
| CBO Price: $24.92 Save: $5.03 | |
|
|
|
|
by ODI
|
|
|
|
2-ply ultra soft raised pads in 130mm, heavy-duty closed end
|
| CBO Price: $11.58 Save: $2.32 | |
|
|
|
|
by ODI
|
|
|
|
Classic mushroom style collapsible rib pattern
Constructed from ODI's proprietary grip compound for comfort and durability
Reinforced closed ends to prevent grip blowout
|
| CBO Price: $8.25 Save: $1.65 | |
|
|
|
|
by ODI
|
|
|
|
Clamps on to dual-crown fork stanchions to prevent damage to frame
Easy to install and adjust, more secure and lower profile than stock bumpers
Molded loops allow clean and easy zip-tie number plate mounting
Available for 35mm Boxxer or 40mm Fox stanchions, sold in pairs
|
| CBO Price: $13.25 Save: $2.65 | |
|
|
|
|
by ODI
|
|
|
|
Odi Flight Control Wingtips Handle Bars and Bar EndsFeatures: Wingtip bar extensions thread into ODI Flight Control handlebars to customize handlebar widthUse threaded end plug to retain stock bar widthConstructed from 7075 T6 aluminum, precision laser etched graphics
|
| CBO Price: $13.25 Save: $2.65 | |
|
|
|
|
by ODI
|
|
|
|
Odi Threaded Handle Bars and Bar EndsFeatures: Wingtip bar extensions thread into ODI Flight Control handlebars to customize handlebar widthUse threaded end plug to retain stock bar widthConstructed from 7075 T6 aluminum, precision laser etched graphics
|
| CBO Price: $14.92 Save: $2.98 | |
|
|
|
|
by ODI
|
|
|
|
ODI Yeti Speed grips combine a classic Yeti logo design and knurled surface pattern for optimal comfort and control.Features:Speed Grip is a single compound gripSoft multi-textured surface for improved comfort and controlOpen end with push-in Yeti End Plugs
|
| CBO Price: $9.08 Save: $1.52 | |
|
|
|
|
by ODI
|
|
|
|
Grooved channels prevent mud and water buildup
Overmolded flap gives added protection on outside clamp
Unique undercut pads provide slim comfortable feel with maximum grip
Custom flanged design provides hand support with more usable grip surface
Aluminum clamps secure the grip on both ends using hex wrench
130mm length for standard shift/brake setup (not for twist shifters = use 90mm replacement grip options for twist shifters)
Bonus pack includes Lock-On grips, clamps, and wit...>> more >>
|
| CBO Price: $26.58 Save: $3.37 | |
|
|
|
|
by ODI
|
|
|
|
Grips take standard MTB/BMX Lock-On clamps, have flexible flange . Alloy clamps interlock with grips rigid inner plastic core. Thin profile with soft file type grip surface. Includes plugs
|
| CBO Price: $13.25 Save: $1.63 | |
|
|
|
|
by ODI
|
|
|
|
Solves grip slippage by using aluminum pinch clamps on both ends. Alloy clamps interlock with grips rigid inner plastic core. Thin profile with soft file type grip surface. Includes grips, plugs and Lock-On clamps
|
| CBO Price: $21.58 Save: $2.46 | |
|
|
|
|
by ODI
|
|
|
|
Aluminum clamps secure the grip on both ends using hex wrench. Loosen pinch bolts and grips slide on or off with ease. 130mm length for standard shift/brake setup (not for twist shifters). Bonus pack includes Lock-On grips, clamps, and with new Snap Cap end plugs
|
| CBO Price: $26.95 - $29.95 Save up to: $3.00 | |
|
|
|
|
by ODI
|
|
|
|
ODI Lock-Jaw End Cap. Secures Lock-On grips and covers the end of the handlebar
|
|
|
|
|
by ODI
|
|
|
|
Expanding rubber plugs protect grips and rider
|
|
|
|
|
by ODI
|
|
|
|
ODI Lock Jaw Clamps are machined out of durable anodized aluminum and are compatible with any ODI Lock-On Grip System grips. Available in 4 colors to match your style: Black, Silver, Red, Blue. Features: - Sturdy machined aluminum construction - Replacement Lock Jaw Clamp sets include: - Four precision machined aluminum clamps - Five 2.5mm allen bolts - One 2.5mm allen wrench - Compatible with both BMX and MTB versions of the Lock-On Grip System ..........4 colors available: Black, Silver,...>> more >>
|
|
|
|
|
by ODI
|
|
|
|
Designed by Cameron Zink and manufactured using ODI's proprietary grip compounds
143mm length gives extra room for freeride maneuvers
Soft TPR material provides optimal feel and control
|
|
|
|
|
by ODI
|
|
|
|
ODI Troy Lee Grips
|
|
|
|
|
by ODI
|
|
|
|
ODI X-Treme Grips
|
|
|
|
|
by ODI
|
|
|
|
ODI Flangless Longneck Grips
Item SpecificationsColorBlackUnit of SalePairWeight100gLength143mmFlangeNoDefined ColorBlack...>> more >>
|
|
|
|
|
by ODI
|
|
|
|
The ODI "O" Grips feature a new, softer durometer compound that offers improved comfort right out of the box.
Multi-directional rib pattern provides excellent shock absorptionThick O-shaped ribs offer improved controlIncludes Thug Plug end plugs
Item SpecificationsColorBlackUnit of SalePairWeight82gLength144mmFlangeYesDefined ColorBlack...>> more >>
|
|
|
|
ODI Lock Jaw Plugs Urethane Lock On Bar End Plugs Details...
by ODI
|
|
|
|
Features:Sturdy Urethane Plastic ConstructionFits most sized barsTriple-Core Design Holds Plugs Inside BarsSold in pairsLock-On End Plugs are designed exclusively for use with ODI Lock-On Grips. These bar end plugs are designed to slide over the outer Lock Jaw Clamp to help prevent damage to your bars or clamps
|
| CBO Price: $10.99 Save: $7.96 |  |
|
|
|
ODI Thug Plugs Urethane Lock On Bar End Plugs Details...
by ODI
|
|
|
|
Features:Sturdy Urethane Plastic ConstructionFits most sized barsTriple-Core Design Holds Plugs Inside BarsSold in pairsHelp protect your investment with Thug Plug handlebar end plugs. Constructed of strong urthane materials, these plugs hlep prevent damage to your handlebars or grips
|
| CBO Price: $3.99 Save: $1.50 | |
|
|
|
