|
|
|
by Park Tool
|
|
|
|
Park RT-2 Head Cup Remover is specially designed for removing 1-1/4" and 1.5" head cups.Features:The RT-2 is specially designed for removing 1-1/4" and 1.5" head cupsRT-2's flared end fits through the head tube and snaps behind the cup, allowing the cup to be removed with a tap of a hammerDurable, heat treated, alloy steel with nickel finish for long life
|
| CBO Price: $29.95 msrp: $35.95 Save 17% | |
|
|
|
|
by Park Tool
|
|
|
|
Updated from HHP-1 version (05/03), Longer threaded rod and resized press-plates to accomodate 1" to 1.5" headset sizes . For installing press fit bottom bracket and Headset cups. Nickel-plated, heat-treated steel construction. 2005 updated quick release bottom plate for easy install/removal. Long, rubber coated handles for comfortable use. Includes (#530-2) stepped bushing cup adapters to fit most cup sizes (also available separate for older tools)
|
| CBO Price: $139.95 msrp: $169.95 Save 18% | |
|
|
|
|
by Park Tool
|
|
|
|
The TNS-4 makes it quick and easy to install star-fangled nuts used with 1 and 1-1-8 threadless headset systems. Using a durable steel driver and built-in guide, the TNS-4 perfectly aligns the star-fangled nut and sets it to the proper depth every time. The unique design virtually eliminates pinched fingers
|
|
|
|
|
by Park Tool
|
|
|
|
Simple and economical, Park's HHP-3 Home Mechanic Bearing Cup Press is designed to install all sizes of head cups and one-piece bottom bracket cups
|
| CBO Price: $69.95 msrp: $79.95 Save 13% | |
|
|
|
|
by Park Tool
|
|
|
|
The CRP-2 is a precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork. New for 2013, the tool is fully adjustable, allowing precise, independent positioning of the blades around the crown race. Locating each blade independently provides flexibility to fit around most potential interferences with fork top caps or crown protrusions.
Universal design works with 1”, 1-1/8”, 1-1/4” and 1.5 forks (suspension or rigid) and crown races with outside ...>> more >>
|
|
|
|
|
by Park Tool
|
|
|
|
Park's CT-2 is designed for fast easy removal or repair of chains. The tremendous leverage generated removes even the toughest rivets. To use, simply put the chain roller in the built-in recess and squeeze the handles
|
| CBO Price: $74.95 msrp: $89.95 Save 17% | |
|
|
|
|
by Park Tool
|
|
|
|
The Deluxe Bench Mount Stand uses the same 10-0-3c clamp as the PRS-2 OS-1 and PRS-3 OS-1. The clamp rotates 360 degrees, allowing the bike to be positioned at any angle. Mounts easily to any flat surface. (Mounting bolts not included)
|
| CBO Price: $229.95 msrp: $269.95 Save 15% | |
|
|
|
|
by Park Tool
|
|
|
|
The Home Mechanic Repair Stand works well with many recumbents and bikes with uniquely shaped tubing.
Includes two repair stands shipped in one boxThree-point leg system with reinforced center yoke offers superior stabilityQuick-release adjusting cam-type clamp fits tubes 7/8" to 3" (24mm - 76mm) in diameter and rotates 360 degreesFolds down to 41" (104.14cm) for easy storage or transport and sliding retention rings lock folding legs into placeComposite top tube for smooth 360-degree clamp rot...>> more >>
|
| CBO Price: $169.95 msrp: $193.95 Save 12% | |
|
|
|
|
by Park Tool
|
|
|
|
Home mechanic quality, 3-point leg/base, folding floor repair stand. Height adjustable from 40"-60" (100cm-150cm). Clamp fits tubes from 7/8" to 3" (24mm-76mm). Infinite 360-degree head rotation with easy flip-handle, tapered rotational locking system . Powder coated, steel tube construction for long life. Folds to 41" in length for easy storage and transport. PCS-10 includes Q/R clamp and height adjust, leg storage clip and Q/R and locking sliding yoke for fast folding and extra stability...>> more >>
|
| CBO Price: $169.95 msrp: $193.95 Save 12% | |
|
|
|
|
by Park Tool
|
|
|
|
Built to withstand the rigors of everyday use, the heavy duty PRS-3 OS-1 is the repair stand of choice for professional bike shop mechanics around the world
|
| CBO Price: $329.95 msrp: $369.95 Save 11% | |
|
|
|
|
by Park Tool
|
|
|
|
Designed to be easily mounted to any post or wall stud, the PRS-4W is a shop quality stand using the 100-3D Micro-Adjustable clamp. The PRS-4W-2 places the clamp approximately 13 inches from the wall. Powder coat finish. The wall mounting plate is 6 inches by 2.5 inches (approx. 15cm x 6cm). Mounting holes approximately one-half inch in diameter and are on 4-inch centers (100.2mm). Mounting bolts not included
|
| CBO Price: $189.95 msrp: $212.95 Save 11% | |
|
|
|
|
by Park Tool
|
|
|
|
Designed to be easily mounted to any post or wall stud, the PRS-4W is a shop quality stand using the same 100-3C clamp and locking system as the PRS-2, PRS-3, and PRS-4. The PRS-4W places the clamp approximately 14.5 inches (37cm) from the wall. The wall mounting plate is 6 inches by 2.5 inches (approx. 15cm x 6cm). Mounting holes approximately one-half inch in diameter and are on 4-inch centers (100.2mm)
|
| CBO Price: $189.95 msrp: $212.95 Save 11% | |
|
|
|
|
by Park Tool
|
|
|
|
With todays lightweight components, torque wrench use in the shop is no longer an optionits a must for every mechanic. The TW-6 is a high quality, ratcheting, click type torque wrenches that accurately measure and apply the proper amount of torque to a components threaded fastener(s)
|
| CBO Price: $119.95 msrp: $132.95 Save 10% | |
|
|
|
|
|
by Park Tool
|
|
|
|
This large tray is ideal for holding small parts and tools. It features deep sides so small items stay put. A variety of slots and holes hold any tool. Fits all Park Tool Repair Stands except PRS-2 OS, PRS-3 OS, and PRS-4 OS, and PRS-15. The current PRS-5 (2002) uses a black vertical tube that mates well with the 104 tray. Pre-2002 PRS-5 models use a blue oval tubing. This blue tubing has marginal but adequate contact with the 104 tray. The 104 tray must be removed for the PRS-5 to be folded and...>> more >>
|
| CBO Price: $15.95 msrp: $17.95 Save 11% | |
|
|
|
|
by Park Tool
|
|
|
|
A great work stand accessory built to keep tools, lubes and spare parts close at hand. The #106 installs easily utilizing our exclusive receiver pod accessory system found on PRS-15, PCS-10 and PCS-11 Repair Stands. Also fits PCS-1, PCS-4 and PCS-9 Repair Stands when used with part #106-AC Accessory Collar (available separately). Perfect as a convenient way to keep tools and supplies handy in the workshop or at events.Features:Universal, large compartmentSmall compartmentLube holderIntegrated t...>> more >>
|
| CBO Price: $26.95 msrp: $33.95 Save 21% | |
|
|
|
|
by Park Tool
|
|
|
|
Park's 105 is a handy and sturdy cast aluminum tray with deep-walled compartments and assorted slots for holding tools, lubes, and small parts. Fits all PRS-2, PRS-2OS, PRS-3, and PRS-3 OS Shop Stands, as well as PRS-6 and PCS-1 Repair Stands manufactured after June 1996 (using composite top tubes). Tools not included
|
| CBO Price: $59.95 msrp: $69.95 Save 14% | |
|
|
|
|
by Park Tool
|
|
|
|
Most headset wrenches are too thin to use on the top locknut of headsets, particularly aluminum locknuts which can be marred and rounded off very easily. Park's HW-2 Professional Headset Locknut Wrench is the answer. It has a thick, semi-box opening and a substantial, extra long handle for a firm and precise grip on most 8 point 32mm and 36mm locknuts. Made of investment cast steel
|
| CBO Price: $34.95 msrp: $42.95 Save 19% | |
|
|
|
|
by Park Tool
|
|
|
|
Park's SG-6 Threadless Saw Guide ensures a straight, clean cut on 1", 1-1-8", and 1-1 4" threadless forks. Simply clamp the SG-6 onto the fork and cut, letting the SG-6 guide the hacksaw blade. The SG-6s non scratching composite body incorporates steel threads and a steel reinforcing plate to withstand the rigors of heavy shop use
|
| CBO Price: $32.95 - $35.95 msrp: $37.95 - $43.95 Save 18% | |
|
|
|
|
by Park Tool
|
|
|
|
Park Tool saw guides ensure a straight, clean cut every time.
Specially designed to accommodate wider, carbon specific saw bladesFor fork steerer tubes up to 1-1/4"
|
| CBO Price: $35.95 - $37.95 msrp: $42.95 - $43.95 Save 18% | |
|
|
|
|
by Park Tool
|
|
|
|
Shop quality screwdriver designed for comfort and durability. Featuring dual density grips and heat-treated, chrome vanadium tips and shafts
|
| CBO Price: $4.95 msrp: $5.95 Save 17% | |
|
|
|
|
by Park Tool
|
|
|
|
A long-handled L-shaped wrench for installing and removing crank bolts with an 8mm socket. Make from industrial grade Bondhus Protanium high torque steel. "Speed Bearing" attachment for quick installation and removal of long threaded bolts
|
| CBO Price: $4.95 msrp: $5.95 Save 17% | |
|
|
|
|
by Park Tool
|
|
|
|
Shop quality screwdriver designed for comfort and durability. Featuring dual density grips and heat-treated, chrome vanadium tips and shafts. The 2 is a 1-4" shaft, perfect for derailleur adjustmenet screws. It is the most common cross tip ("Phillips") required
|
| CBO Price: $4.95 msrp: $5.95 Save 17% | |
|
|
|
|
by Park Tool
|
|
|
|
Clamping directly to freshly painted or ultra thin-walled frame tubing can cause inadvertent damage. The new ISC-4 securely holds most bikes without clamping on any frame tube. To use, simply insert the ISC-4 into the frames seat tube, tighten the knob, and clamp into any Park Tool Repair Stand. The ISC-4s hex-shaped shaft resists twisting while clamped in the stand. Works with a huge range of seat tube sizesanything with an inside diameter of 24mm to 32mm
|
| CBO Price: $49.95 msrp: $59.95 Save 17% | |
|
|
|
|
by Park Tool
|
|
|
|
The Park Tool Head Cup Remover makes headset cup removal easy. The tool is pulled through the frame until the flared ends snap in behind the cup. A blow on the tool head removes the cup. Fits 1, 1-1-8 and 1-1-4 headsets. Strong, heat treated alloy steel with nickel finish.
|
| CBO Price: $29.95 msrp: $35.95 Save 17% | |
|
|
|
|
by Park Tool
|
|
|
|
Because torque specifications are now given for most parts and accessories, Park Tool offers two tough, accurate torque wrenches. The TW-2 is 3-8" drive and ranges from -600 inch pounds
|
| CBO Price: $44.95 msrp: $52.95 Save 15% | |
|
|
|
|
by Park Tool
|
|
|
|
Complete chain cleaning kit includes CM-5 Cyclone Chain Scrubber machine, GSC-1 GearClean cassette/derailleur brush, and (1) 8oz Citrus ChainBrite cleaning solution (up to 10 speed chain compatible). Rebuild kit includes (1) large side-scrubber brush 327, (2) roller brushes 328-2, (2) wicking exit sponges 329
|
| CBO Price: $8.95 msrp: $10.49 Save 15% | |
|
|
|
|
by Park Tool
|
|
|
|
Featuring a three color Park Tool logo, the PNT-1 Pint Glass is made from heavyweight, dishwasher safe glass
|
| CBO Price: $5.95 msrp: $6.95 Save 14% | |
|
|
|
|
by Park Tool
|
|
|
|
Aluminum die cast frame construction, blade tension adjuster and comfortable handle make this the perfect hacksaw for the shop. SAW-1 includes one blade and accepts any 12" (300mm) hacksaw blade
|
| CBO Price: $19.95 msrp: $22.95 Save 13% | |
|
|
|
|
by Park Tool
|
|
|
|
Ergonomic, nylon P-handle design for comfort and torque with hole in handle for alternate storage. Wrenches made from through-hardened high torque industrial steel for long life . PH-T1 includes: T6,T8,T10,T15,T20,T25,T30,T40 size Torx wrenches
|
| CBO Price: $6.95 - $42.95 msrp: $7.95 - $46.95 Save 13% | |
|
|
|
|
by Park Tool
|
|
|
|
Park Tool's poly-urea lubricant was developed specifically for bicycle maintenance and repair. PolyLube 1000 has an extremely high shear strength to protect vital parts under extreme conditions.Features:All-purpose, green poly-urethane greaseRepels moisture and is compatible with conventional greases
|
| CBO Price: $13.95 msrp: $15.95 Save 13% | |
|
|
|
|
by Park Tool
|
|
|
|
World famous Park Tool quality wrapped up in a great set of metric combination wrenches. The MW-set includes 6-15 12-point box-open end wrenches. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool vinyl for positive grip
|
| CBO Price: $69.95 msrp: $79.95 Save 13% | |
|
|
|
|
by Park Tool
|
|
|
|
Park Tool introduced the bicycle industry to the 3-way Hex Wrench Set more than 20 years ago. Our latest versions are stronger and more comfortable than ever. They fit perfectly in the palm of the hand and provide tremendous leverage. Hexes are made from Bondhus Protanium high torque industrial steel and are heattreated for long life. Tips of hexes are chamfered for a perfect fit. AWX-8 is a 4mm, 5mm, and 6mm hex set
|
| CBO Price: $10.49 msrp: $11.95 Save 12% | |
|
|
|
|
by Park Tool
|
|
|
|
Big and powerful, Park Tool's PAW-12 is forged from carbon steel and chrome plated. Features a comfortable vinyl dipped handle. Jaws open to 36mm and feature a laser engraved measurement scale
|
| CBO Price: $29.95 msrp: $33.95 Save 12% | |
|
|
|
|
by Park Tool
|
|
|
|
The use of Star-shaped fittings on disc brakes, pedals, chainring bolts, etc. are becoming increasingly popular. The TWS-2 combines the wrench sizes currently being used on bicycle components (T7, T9, T10, T15, T20, T25, T27, T30 and T40) in a convenient fold-up set. Composite handle is extremely strong (stronger than steel handles), comfortable to use, and slip resistant
|
| CBO Price: $18.49 msrp: $20.95 Save 12% | |
|
|
|
|
by Park Tool
|
|
|
|
The TS-TA makes it possible to adapt all Park tool truing stands to work with 12mm, 15mm, and 20mm thru axle wheels, as well as Cannondale Lefty wheels
|
| CBO Price: $53.95 msrp: $60.95 Save 11% | |
|
|
|
|
by Park Tool
|
|
|
|
The SW-10 Adjustable Spoke Wrench helps remove tight (stubborn) or rounded nipples. Hardened, chrome plated investment casting gives superior strength and durability. Fits any of the 80 gauge sizes listed for SW-0 through SW-2
|
| CBO Price: $39.95 msrp: $44.95 Save 11% | |
|
|
|
|
by Park Tool
|
|
|
|
A dial indicator kit that bolts to the DT-3, allowing for greater accuracy and a way to measure and quantify results
|
| CBO Price: $39.95 msrp: $44.95 Save 11% | |
|
|
|
|
by Park Tool
|
|
|
|
Designed and built to install and remove BB30 bottom bracket bearings. The BBT-30.3 includes two installation bushings, which are used in conjunction with an HHP-2 or HHP-3 Head Cup Press to quickly and precisely install the bearings into the frame. Also includes a bearing remover, which slides through the bottom bracket shell and fits into the bearing so it can be tapped out with a hammer
|
| CBO Price: $8.95 - $59.95 msrp: $8.95 - $65.95 Save 11% | |
|
|
|
|
by Park Tool
|
|
|
|
The HCW-11 fits "slotted" bottom bracket adjusting cups and cups with "raised" 16mm wrench flats. These are common on older English bicycles, and less expensive bicycles. The opposite end has two ears that are 23mm wide and approximately 5mm wide
|
| CBO Price: $14.95 msrp: $15.95 Save 6% | |
|
|
|
|
by Park Tool
|
|
|
|
The new BBT-19 is a heavy duty, shop quality tool for installing and removing Shimano, Truvativ, Race Face, FSA and Campagnolo 16-notch external bearing bottom bracket cups. Made from investment cast steel, the BBT-19 can be used with either a 3-8 drive torque wrench, 3-8 ratchet driver, FRW-1 Freewheel Remover Wrench, or 1 wrench
|
| CBO Price: $20.95 msrp: $22.49 Save 7% | |
|
|
|
|
by Park Tool
|
|
|
|
The Park BBT-4 bottom bracket tool fits Campagnolo Veloce, Mirage, Centaur, Daytona, and Avanti BBs, now features "positioning tabs" to align the tool and prevent it from slipping from the bottom bracket cup. The handle is vinyl coated for comfort
|
| CBO Price: $8.95 msrp: $9.95 Save 10% | |
|
|
|
|
by Park Tool
|
|
|
|
The Park SPA-6 Adjustable Spanner uses hardened, replaceable pins. Designed for heavy-duty use, the distance between pins is adjustable, allowing use on virtually any bottom bracket cup. Also fits the crankarm one-key release locking rings. Pins are 2.3mm (0.0906 inch) diameter
|
| CBO Price: $16.49 msrp: $18.49 Save 11% | |
|
|
|
|
by Park Tool
|
|
|
|
Park's BBT-7 Lockring Wrench is used for installing and removing the lockring used on 1997 -2000 Dura Ace and XTR Bottom Brackets (M950). It is laser cut and engages five of the lockring's six notches for a precise, secure fit. The handle is vinyl dipped for comfort. While made specifically to fit Dura Acer and XTR Lockrings, it also fits several other lockrings as well
|
| CBO Price: $16.49 msrp: $18.39 Save 10% | |
|
|
|
|
by Park Tool
|
|
|
|
Double sided bottom bracket lockring hook spanner. One side is a single hook, the other is a hook spanner with 3 notches for better engagement in the lockrings. The three-hook end will fit 3-notch lockrings with a maximum outside diameter of 46mm, and minor diameter (in the notches) of 40mm
|
| CBO Price: $13.95 msrp: $15.59 Save 11% | |
|
|
|
|
by Park Tool
|
|
|
|
Used to ream BB30 bottom bracket shells to an ID of 41.93 - 41.94mm. Must be used with the HTR-1 Head Tube Reamer and Facer and a 750.2 Centering Cone
|
|
|
|
|
by Park Tool
|
|
|
|
Tools designed by Park Tool to service Bottom Brackets.
Used to ream and face PF30 bottom bracket shells to an ID of 45.92 - 45.93mm. Must be used with the HTR\-1 Head Tube Reamer and Facer, 750.2 Centering Cone and the 690-XL Facer.
|
|
|
|
|
by Park Tool
|
|
|
|
Fits Shimano Hollowtech-II style bearing cups and crank-arm bolt: XTR-M960, XT-M765, Saint-M800, and Dura-Ace 7800 series . One end engages the 16 external bearing-cup notches while the other end engages the 8 internal splines of the crank-arm fixing bolt. Laser-cut steel construction. Vinyl coated handle for comfort
|
| CBO Price: $19.95 msrp: $21.49 Save 7% | |
|
|
|
