|
by Syntace
|
|
|
|
This Kit comes with all the bit sizes needed to perform simple adjustments and repairs.
Handy case with snap-in bit holder is includedFeatures Hex-Plus key with a special profile that increases surface contact, reducing the chance of round-outKit Includes: a quarter-inch socket adapter and features Hex-Plus 2, 2.5, 3, 4, 5, 6, & 8mm bits & a T25 bit
Item SpecificationsTip Size2.0mm,2.5mm,3.0mm,4.0mm,5.0mm,6.0mm,8.0mm,T25...>> more >>
|
| CBO Price: $42.75 msrp: $47.50 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Features:7050 aluminum construction, shot-peened and anodized. An extra-long, ergonomic lever with self-locking adjustment nut. No-wear 1mm stainless steel cam pivot plate between clamp and lever. Seatpost diameter specific wiper seal keeps grime from entering the frame
|
| CBO Price: $44.99 msrp: $49.95 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Undirectional carbon base bar with aerodynamic profile (15mm high/54mm wide flats). Outstanding damping properties with up to 8mm of available flex . Titanium reinforcing mesh at the 31.8mm clamping surface . Drag reducing internal cable routing. 189g.Features:Measures outside to outsideTitanium mesh clamping area distributes clamping forces for greater strengthInternal cable routing
|
| CBO Price: $223.20 msrp: $248.00 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Precision 1/4" or 1/2" drive torque wrench for the exact tightening of equipment
Read in Newton-meters and inch pounds and has preselectable torque by rotating knob on end of handle, click upon reaching desired torque value and includes certificates of calibration
|
| CBO Price: $215.91 msrp: $239.90 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Note:If using bar ends, Syntace bar plugs CRB are required (not included, see “Accessories for Bars & Stems).
Note:The Duraflite 31.8 Carbon is compatible with standard MTB stems. These stems only allow assemble from the open front end and fixed with a clamp cap or clamps. The older, one-screw clamping systems with thread-through assembly cannot be used.
Syntace mtb bars have a visible carbon UD finish. If you turn the bar against the light light, you can distinctively see th...>> more >>
|
| CBO Price: $148.50 msrp: $165.00 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Syntace Vector AM 31.8 Carbon 12' 10mm rise 680mm
The carbon riser bar that lasts, as you would expect from a Syntace bar - now with the 31.8 clamp standard and in 740 mm width
|
| CBO Price: $198.00 msrp: $220.00 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
TT/Triathalon bars provide optimized aero position, minimal wind drag . Updated 20 degree forward/downward slant at the grip which offers ideal tension from the wrist to the upper arm creating a power-saving opposite pull for high pedal pressure. Ergonomic Double Helix grip bend prevents fatigue, conserves energy and promotes an aerodynamic flat back position. Forged 24.0mm diameter 6061 Syntalloy tubing accepts most bar mounted components. Shock absorbing Biowing cups with 8mm thick armrest...>> more >>
|
| CBO Price: $198.00 msrp: $220.00 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Syntace Carbon Time Trial Bars.Features:Measures outside to outsideTitanium mesh clamping area distributes clamping forces for greater strengthInternal cable routing
|
| CBO Price: $220.50 msrp: $245.00 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Syntace C3 Clip On Handle Bars and Bar EndsFeatures: Syntace's C3 aerobar creates scientific aerodynamics by providing an optimized aero position and minimal wind dragErgonomic Double Helix grip bend prevents fatigue, conserves energy and promotes an aerodynamic flat back positionDouble Helix 20 degree forward/downward slant at the grip which offers ideal tension from the wrist to the upper arm creating a power-saving opposite pull for high pedal pressureShock absorbing Biowing cups with 8mm thi...>> more >>
|
| CBO Price: $197.91 msrp: $219.90 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Syntace Racelite Cdr Handle Bars and Bar EndsFeatures: Syntace's ergonomics combine a compact drop and reach with a standard anatomic bendCarbon fiber layers in a variable load-depend diameter for a safer barOvalized flat-top with 6 degree backsweep offers noticeable comfortTi-mesh in the stem/aero bar clamp areas to distribute clamping forcesCompatible with the Syntace C3 clip-on aero bar206g @ 42cm (width measured outside-to-outside)
|
| CBO Price: $98.91 - $296.91 msrp: $109.90 - $329.90 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Syntace P6 Alloy SeatpostsFeatures:Special 4-times reinforced precision alloy tubingERS (Extended Rail Support) extra wide, 53mm, lower plate protects lightweight saddle rails3D cold-forged head features two-bolt micro angle adjustment combined with 40 degrees of pivoting range. 262g (30.9x400mm)
|
| CBO Price: $107.91 msrp: $119.90 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Syntace Vector 5 Riser Handle Bars and Bar EndsFeatures: German designed and tested bars for optimal strength to weight ratioSyntace's unique carbon fiber features vibration damping qualities that offer precise steering control and helps reduce rider fatigueTi-mesh wrap protects the stem clamp/bar end locations from crushing under clamping forceChoose + for positive rise or for negative riseNegative rise bars are designed to put the rider in a lower position, excellent for 29er applications...>> more >>
|
| CBO Price: $188.91 - $198.00 msrp: $209.90 - $220.00 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Syntace Vector Riser Handle Bars and Bar EndsFeatures: Syntace's most popular bar is now available in aluminum with the same great rise and sweep30.0" wide for a relaxed ride, even through the tough terrainVector alloy can be shortened to specific rider preferences down to 25
|
| CBO Price: $84.51 - $198.00 msrp: $93.90 - $220.00 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Syntace Hiflex Full Carbon P6 SeatpostsFeatures:The most technologically advanced post on the marketHiFlex offers twice the shock absorption of a standard carbon post, providing comfort and stabilityERS (Extended Rail Support) extra wide, 53mm, lower plate protects lightweight saddle rails3D cold-forged head features two-bolt micro angle adjustment combined with 40 degrees of pivoting range. 213g (30.9x400mm)
|
| CBO Price: $225.00 msrp: $250.00 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Syntace Megaforce 2 StemFeatures:Syntace Megaforce 2 StemsIntended use: all-mountain, freeride, downhill36 x 42mm bar clamp was designed to stiffen up cockpits using bars more than 700mm wideTitanium bolts
|
| CBO Price: $121.50 msrp: $135.00 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Syntace Megaforce2Features:Megaforce2 offers precise steering control with super wide bars due to the extreme width of the stem, 42mm internal diameterOptimized from the ground up to offer exceptional torsional stiffness while still being super lightweightFlipFlop design, +/ 6 degrees, for excellent sizing options132g
|
| CBO Price: $121.50 msrp: $135.00 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Syntace Stratos Cx Tt Handle Bars and Bar EndsFeatures:Syntace Carbon Time Trial BarsMeasures outside to outsideTitanium mesh clamping area distributes clamping forces for greater strengthInternal cable routing
|
| CBO Price: $220.50 msrp: $245.00 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Syntace F109 ThreadlessFeatures:Syntace F109 Stems
|
| CBO Price: $126.00 msrp: $140.00 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Syntace Vector 10 Riser Handle Bars and Bar EndsFeatures: German designed and tested bars for optimal strength to weight ratioSyntace's unique carbon fiber features vibration damping qualities that offer precise steering control and helps reduce rider fatigueTi-mesh wrap protects the stem clamp/bar end locations from crushing under clamping forceChoose + for positive rise or for negative riseNegative rise bars are designed to put the rider in a lower position, excellent for 29er applications...>> more >>
|
| CBO Price: $188.91 - $198.00 msrp: $209.90 - $220.00 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Syntace began with the simple idea that wider is better. The result is their 35mm wide rims and wheels light enough for Cross Country race applications and durable enough All Mountain use
35mm, 500g disc specific welded custom alloy tubeless ready clincher rim (20.5x35mm) with a bead hook and shot peened inside and out for increased surface density
35mm wide rims support the tire better, helping the tire casing maintain its shape for optimal traction and corning ability
Syntace HiTorq...>> more >>
|
| CBO Price: $495.00 - $718.20 msrp: $550.00 - $798.00 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Syntace Torque Wrenches are durable and perfect for the home or shop mechanic.
The torque wrench choice of Gracie's Wrench (Embrocation Cycling Journal: Vol. 6)Range of 1-20 Nm/10-180 in-lbsPrecise +/- 4%
Item SpecificationsTip Size1/4"
|
| CBO Price: $171.00 msrp: $190.00 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Syntace P6 Carbon Hiflex SeatpostsFeatures:Syntace F109 StemsSyntact P6 seatpost with extended rail system
|
| CBO Price: $225.00 msrp: $250.00 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Includes extra blade, built-in deburring tool, and comes with two cutting wheels for aluminum
|
| CBO Price: $72.00 msrp: $80.00 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Syntace Force 109 StemFeatures:An unmatched combination of a high-strength, forged aluminum and real 3D forging technology results in an incredibly lightweight bombproof stem200 degrees of handlebar contact reduces handlebar flex and creates a solid stem/bar interfaceUseable for both road, 84 degree, and mountain, 6 degree, applicationsTitanium bolts included113g
|
| CBO Price: $84.51 msrp: $93.90 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Syntace Superlock Clamp SeatpostsFeatures:7050 aluminum construction, shot-peened and anodizedAn extra-long, ergonomic lever with self-locking adjustment nut No-wear 1mm stainless steel cam pivot plate between clamp and lever Seatpost diameter specific wiper seal keeps grime from entering the frame (measure frame and seatpost before ordering)
|
| CBO Price: $48.51 msrp: $53.90 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Original armrests for all Syntace aerobars including velcro
|
| CBO Price: $25.20 msrp: $28.00 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
The Syntace Lifter 31.8 Kit is ideal for the cyclist who wants better access to the top of the base-bar, or prefers a higher aero position. For all Syntace Aerobars with 31.8 clamp. Raise the position of the Syntace Aerobar by an additional 12.5mm
|
| CBO Price: $51.30 msrp: $57.00 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Ergonomically-shaped foam core replacement pads for C2 Clip Ultralite and Streamliner
|
| CBO Price: $23.40 msrp: $26.00 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
The patented Syntace CenterRise Design in aluminum. Through CenterRise automatically get the correct bar height and superior lightness at the same time. Can be cut down to 560 mm
|
| CBO Price: $67.50 msrp: $75.00 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Stainless steel shim helps center the rotor perfectly within the disc brake caliper. Great for swapping wheelsets without the threat of brake drag.Features:.2mm thickAligns rotor with frame
|
| CBO Price: $10.80 msrp: $12.00 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Syntace X-12 rear axle standard creates a stiffer and lightweight rear end
Syntace X-12 parts are only compatible with frames that have Syntace X-12 dropouts
X-12 tread inserts are available in three options: concentric (0 mm), eccentric (0.5 mm) and eccentric 1.0 mm
Eccentric inserts are used to initially center the wheel within the frame. After the wheel is initially centered the eccentric insert is then removed and replaced with the concentric insert
X-Fix allen key installs and r...>> more >>
|
| CBO Price: $6.30 msrp: $7.00 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Syntace Replacement Blades for Tubing Cutters.
|
| CBO Price: $27.00 msrp: $30.00 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Syntace X-12 derailleur hangers and screws are only compatible with frames that have Syntace X-12 dropouts
Syntace Derailleur Hangers
|
| CBO Price: $10.80 msrp: $12.00 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Syntace X-12 derailleur hangers and screws are only compatible with frames that have Syntace X-12 dropouts
Syntace Derailleur Hanger Hardware
|
| CBO Price: $10.80 msrp: $12.00 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Heavy-duty tube cutter handy for cutting seatposts, steerers and bars up to 35mm in diameter
Includes deburring tool and spare cutting blade (supplied with blades for aluminum, blades for steel sold separately)
|
| CBO Price: $12.51 - $71.91 msrp: $13.90 - $79.90 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Screw-Set for all Syntace aerobar armrests
|
| CBO Price: $7.34 msrp: $8.15 Save 10% | |
|
|
|
|
by Syntace
|
|
|
|
Syntace Aero Bar Parts
|
| CBO Price: $7.34 msrp: $8.15 Save 10% | |
|
|
|
Syntace Hub and Wheel Axle Conversion Kit Details...
by Syntace
|
|
|
|
Kits include a pair of adapters only (bolt, axle, and quick release available separately)
Instructions and hub axle determinations are available on-line @ www.syntace.com
IS: 6-bolt / 44mm BCD International Standard
Q/R: quick-release, T-A: thru-axle
|
| CBO Price: $44.91 msrp: $49.90 Save 10% | |
|
|
|
