|
by Truvativ
|
|
|
|
HammerSchmidt-specific *(HS) front/left shifter to match SRAM X.0 or X.9 level rear trigger shifters. Dual-gear shift mechanism integrates with HammerSchmidt internal transmission for instant Shift-on-Demand actuation.Features:Compatible only with HammerSchmidt system
|
|
|
|
|
by Truvativ
|
|
|
|
TruVativ 5D Left Crank Arms are not Shimano compatible.Features:Spindle Square spindle hole is oriented differently than Shimano type, not interchangeable
|
|
|
|
|
by Truvativ
|
|
|
|
TruVativ Stylo T20 Seatpost25mm Offset 400/31.6 Blast Black
|
|
|
|
|
by Truvativ
|
|
|
|
TruVativ Left Crank Arms.Features:Powerspline spindle interface is a proprietary Truvativ design.
|
| CBO Price: $26.00 - $51.80 | |
|
|
|
|
by SRAM
|
|
|
|
SRAM Chainrings
|
| CBO Price: $25.00 - $178.00 | |
|
|
|
|
by Truvativ
|
|
|
|
Constructed from custom butted AL-66 (MS5) aluminum with an innovative taper profile for reduced weight Cut-to-fit design is bar-end and grip clamp compatible Bead-blast anodized finish with laser-etched and color-print graphics
|
|
|
|
|
by Truvativ
|
|
|
|
1-piece carbon fiber arms/spider with a forged 6066-T6 aluminum spine and drive-side integrated CrMo GXP-Lite bottom bracket spindle Cover-finished with a layer of clearcoated, unidirectional graphite Uses GXP (Giga X Pipe) external cup, sealed bearing bottom bracket for 68/73mm shells and a 51mm chainline *(sold separately, use: TV-2111 for GXP-BlackBox ceramic or TV-2122 for GXP-Team) 4-arm 3x9sp 7075-T6 tungsten grey hard-anodized aluminum rings with shift pins/ramps, alloy/stainles...>> more >>
|
|
|
|
|
by Truvativ
|
|
|
|
Adapts BB30 frames to allow use of a traditional, 68mm english-threaded bottom bracket Requires green, cylindrical-formula Loctite (603) for a "permanent" installation
|
|
|
|
|
by Truvativ
|
|
|
|
DualHex kits: 5mm-broach bolts with 6mm-broach nuts for secure 2-wrench assembly
Triple kit can be used on 5-arm or 4-arm mountain/road cranks (includes 5 inner chainring bolts in addition to middle/outer bolt/nut set)
Double kits designed for 5-arm road crank applications (steel kit includes washers)
XX/X0/X9/X7 versions do not use nuts due to direct-thread design into outer chainring and inner spider interface (XX use a Torx-T25 broach)
Fits 80/120mm bolt circle SRAM/Truv...>> more >>
|
|
|
|
|
by Truvativ
|
|
|
|
Crank bolt and self-extractor cap with washer (sold each or in pairs depending on application)
SRAM Crank Arm Fixing Bolts
|
|
|
|
|
by Truvativ
|
|
|
|
1-piece forged AL-66 aluminum arms with drive-side integrated CrMo Giga X Pipe bottom bracket spindle for 50mm chainline. GXP (Giga X Pipe): external cup, sealed bearing bottom bracket for 68/73mm shells (GXP-XR bearing cups included). 4-arm 3x9sp 7075-T6 hard-anodized aluminum rings with shift pins/ramps, steel chainring bolts, and M15 self-extractor crank/BB bolt. 940g (with BB).Features:Forged AL66 construction with AL-7075-T6 metal polished chainings9-speed compatible...>> more >>
|
|
|
|
|
by Truvativ
|
|
|
|
TruVativ PressFit 30 Bottom Brackets. Fits frames with 46mm BB shell ID designed specifically for this system
|
| CBO Price: $52.00 - $237.00 | |
|
|
|
|
by Truvativ
|
|
|
|
For fitting SRAM and Truvativ GXP cranksets to frames with either a BB86-Road (86.5mm width) or BB92-MTB (92mm with) 41mm-ID press-fit, non-threaded bottom bracket shells (not for BB90-Trek, or BB30 systems) Includes 37x24x8mm bearing set with wave washer and bearing shields for use on Giga X Pipe cranks with integrated 24mm GXP spindle (Road: 47.5mm chainline, MTB: 51mm chainline) BlackBox (hybrid-ceramic bearing) or Team (steel, sealed bearing) in press-fit, internally sealed composite c...>> more >>
|
| CBO Price: $45.00 - $225.00 | |
|
|
|
|
by Truvativ
|
|
|
|
TruVativ Small Parts
|
|
|
|
|
by Truvativ
|
|
|
|
DualHex kits: 5mm-broach bolts with 6mm-broach nuts for secure 2-wrench assembly
Triple kit can be used on 5-arm or 4-arm mountain/road cranks (includes 5 inner chainring bolts in addition to middle/outer bolt/nut set)
Double kits designed for 5-arm road crank applications (steel kit includes washers)
XX/X0/X9/X7 versions do not use nuts due to direct-thread design into outer chainring and inner spider interface (XX use a Torx-T25 broach)
|
| CBO Price: $10.00 - $25.00 | |
|
|
|
|
by Truvativ
|
|
|
|
Crank bolt and self-extractor cap with washer (sold each or in pairs depending on application)
|
|
|
|
|
by Truvativ
|
|
|
|
Single ring MRP G2/MiniG2 SL downhill (DH) design with Truvativ X0 branding and graphics for either 32-36t or 36-40t maximum chainring compatibility Replaceable truss design polymer skid plate and relieved aluminum backplate for reduced weight and stout impact protection Front-access single-bolt positioning of upper and lower guide with captive hardware for easy install and adjustment Polymer derailleur cage style upper guide provides full chain enclosure Integrated skid-plate/lower...>> more >>
|
|
|
|
|
by Truvativ
|
|
|
|
TruVativ Chainring Bolts
|
|
|
|
|
by Truvativ
|
|
|
|
1-piece forged 6061 aluminum arm/spider with asymmetric arm profile for balanced weight and strengthOptimized Q-factor for 68/73mm shells with a 49.5mm chainline and a drive-side integrated 24mm-steel (GXP) or 30mm-aluminum (BB30) bottom bracket spindle for maximized stiffnessGXP Team cartridge bearing bottom bracket included (can be upgraded to BlackBox ceramic bearings or BB92 Press-Fit with separate bottom brackets)BB30 bottom bracket with internal bearings: supplied with standard (steel) bea...>> more >>
|
| CBO Price: $145.00 - $195.00 | |
|
|
|
|
by Truvativ
|
|
|
|
7075-T6 aluminum construction: choose blast-black or TNT (Truvativ Nickel Teflon) finish. Middle/outer rings have TruShift pins and ramps.Features:Rings have shift ramps and pins44 teeth is 4mm thick
|
| CBO Price: $18.00 - $50.00 | |
|
|
|
|
by Truvativ
|
|
|
|
7075-T6 aluminum construction with a (TGA) tungsten-grey hard anodized finish treatment and CNC/laser detailing for 2x10-speed drivetrains and XX specific bolt-circle-diameter
3mm thick inner ring with a 6mm thick outer ring tapered to engage 10-speed chains (outer chainrings specific to GXP or BB30 cranks: not stocking separate chainrings for Cannondale or Specialized applications)
Middle/outer rings employ perfect-timed shift pins and ramps for XX precision shifting (designed for 26/39t ...>> more >>
|
| CBO Price: $125.90 - $129.90 | |
|
|
|
|
by Truvativ
|
|
|
|
1.1 (DH): includes 8/9sp 38t, 4mm thick 7075-T6 alloy DH chainring and M12 crank/BB bolts. 1-piece forged AL-66 aluminum arms with CrMo pedal inserts and Howitzer-specific bottom bracket interface (BB sold separately). 720g (without BB).Features:Compatible with Truvativ BashGuardForged, 1-piece AL-6061-T6 construction with black anodized chainringsIncludes M12 capless steel crank boltsHeat-treated CroMoly pedal thread inserts...>> more >>
|
|
|
|
|
by Truvativ
|
|
|
|
Lightweight DH-race design born from the BlackBox program on the World Cup circuit
1-piece hollow-forged (OCT) 7050-T6 aluminum arms with integrated 4-arm spider (can be used with separate bashguard and/or chainguide systems)
Optimized Q-factor with a 51mm chainline and an integrated GXP (Giga X Pipe) 24mm or Press-Fit30 (PF30) 30mm bottom bracket spindle for maximized stiffness with reduced weight
GXP Team cartridge bearing bottom bracket included for either 68/73mm or 83mm threaded sh...>> more >>
|
|
|
|
|
by Truvativ
|
|
|
|
Constructed from custom butted AL-6061 aluminum with an innovative taper profile for reduced weight Cut-to-fit design is bar-end and grip clamp compatible Bead-blast anodized finish with laser-etched and color-print graphics
|
|
|
|
|
by Truvativ
|
|
|
|
Custom butted XSL 7050-TV aluminum with an oversized power riser area and design-inspired from the World Cup race circuit Bead-blast anodized finish with laser-etched and color-print graphics
|
| CBO Price: $75.00 - $79.00 | |
|
|
|
|
by Truvativ
|
|
|
|
TruVativ HammerSchmidt ChainringsItem SpecificationsMaterialTeet
|
|
|
|
|
by Truvativ
|
|
|
|
Truvativ Isoflow LH 175 Powerspline Arm BlackFeatures
|
|
|
|
|
by Truvativ
|
|
|
|
Truvativ GXP Team Adapter Cups Specialized MTBFeatures: SRAM Black Box Ceramic GXP Bottom Bracket cupsShorter threaded section for use with SRAM and TruVativ GXP cranksets. Bearings provided by Ceramic Speed of DenmarkSpecifically for SRAM and TruVativ integrated spindle cranksets with external cupsSpindle and crank bolt not includedIncludes two spacers that are only needed for installing a MTB crankset on 68mm bottom bracket shell
|
|
|
|
|
by Truvativ
|
|
|
|
Truvativ H Schmidt Actuator Assembly With Cable ClampFeatures
|
|
|
|
|
by Truvativ
|
|
|
|
Truvativ H Schmidt Bashguard Arms CarbonFeatures
|
|
|
|
|
by Truvativ
|
|
|
|
Truvativ H Schmidt Carrier Assembly With Planetary GearsFeatures
|
|
|
|
|
by Truvativ
|
|
|
|
Truvativ H Schmidt Chainring Retention Guide+Ring ClipFeatures
|
|
|
|
|
by Truvativ
|
|
|
|
Truvativ H Schmidt CranksetsFeatures
|
|
|
|
|
by Truvativ
|
|
|
|
Truvativ Descendant 11 GXP CranksetsFeatures:Lightweight DH-race design born from the BlackBox program on the World Cup circuit1-piece hollow-forged (OCT) 7050-T6 aluminum arms with integrated 4-arm spiderOptimized Q-factor with a 51mm chainline and a drive-side integratedGXP (Giga X Pipe) 24mm bottom bracket spindle for maximized stiffness with reduced weightGXP Team cartridge bearing bottom bracket included for either 68/73mm or 83mm threaded shellsMachined and hard-anodized, 4mm thick 7075-T6...>> more >>
|
|
|
|
|
by Truvativ
|
|
|
|
Truvativ Noir T40 Flat Handle Bars and Bar EndsFeatures: Hi-modulus SL carbon fiber construction with a unidirectional carbon-graphite finish and anti-slip surface treatment in mount zonesStainless mesh reinforcement in stem clamp zone with removable internal alloy end plugs allow cut-to-fit sizing and provide reinforcement for grip and/or bar-end clampsHigh-gloss finish with updated monochrome or color graphics
|
|
|
|
|
by Truvativ
|
|
|
|
Truvativ Press Fit Bbright BB30 Bottom BracketFeatures
|
| CBO Price: $52.00 - $236.00 | |
|
|
|
|
by Truvativ
|
|
|
|
For checking and/or facing ISCG tabs for proper HammerSchmidt funtionality or for disassembly/servicing of HammerSchmidt internals
|
| CBO Price: $12.00 - $264.38 | |
|
|
|
|
by Truvativ
|
|
|
|
Noir and Stylo style carbon and aluminum guards. Replaces outer ring to protect middle and/or inner (FR-style) chainring(s). 4mm thick carbon fiber or 7075-T6 aluminum (black anodized with silver machining)
|
| CBO Price: $43.00 - $119.00 | |
|
|
|
|
by Truvativ
|
|
|
|
Truvativ Stylo T40 Alloy Ti SeatpostsFeatures:3D forged 7050 aluminum mast with fore/aft internal butting and tapered end for increased strength and reduced weight Forged 7050 alloy, 2-bolt adjustable head/clamp with titanium hardware offered in zero or 25mm (1") setbackBlast black anodized mast and head with laser-etched graphics and insertion gradients: 260g
|
| CBO Price: $82.00 - $86.00 | |
|
|
|
|
by Truvativ
|
|
|
|
7075-T6 aluminum construction with a (TGA) tungsten-grey hard anodized finish treatment and CNC/laser detailing (current on 2009 Stylo/Noir cranks). Middle/outer rings have TruShift pins and ramps for improved shifting precision
|
|
|
|
|
by Truvativ
|
|
|
|
1-piece forged 6061-T6 alloy arm/spider design . PowerSpline (PS) bottom bracket interface: 108/113mm for 44.5/46.5mm chainline (sold separately). 2x8/9-speed compatible compact steel chainrings with ramps/pins. Includes steel chainring bolts, CrMo M8 capless crank/BB bolts: 830g
|
|
|
|
|
by Truvativ
|
|
|
|
1-piece forged 6061-T6 alloy arm/spider design . PowerSpline (PS) bottom bracket interface: 113mm for 46.5mm chainline (sold separately). 3x8/9-speed compatible steel chainrings with ramps/pins. Includes steel chainring bolts, CrMo M8 capless crank/BB bolts: 975g
|
|
|
|
|
by Truvativ
|
|
|
|
TruVativ Firex Team GXP 2-Piece Mountain Crank/Bottom Bracket Sets are constructed with forged AL-66 aluminum and have 7075-T6 metal polished chainrings
|
|
|
|
|
by Truvativ
|
|
|
|
Hollow-forged aluminum arm mated to a 4-arm forged aluminum spider Optimized Q-factor with a 49.5mm chainline and a drive-side integrated GXP (Giga X Pipe) 24mm, or non-drive integrated BB30 30mm bottom bracket spindle for maximized stiffnessGXP Team cartridge bearing bottom bracket included for 68/73mm threaded shells (can be upgraded to BlackBox ceramic bearings or BB92 Press-Fit with separate bottom brackets)BB30 steel cartridge bearing set included for 68/73mm shells (can be upgraded to Blac...>> more >>
|
| CBO Price: $314.00 - $360.00 | |
|
|
|
|
by Truvativ
|
|
|
|
Left and right bottom bracket bearing cup set for use on Giga X Pipe cranks with integrated GXP spindle: includes plastic seal/spacer-shell with o-rings. BlackBox (hybrid-ceramic bearing) or Team (steel, sealed bearing) with threaded aluminum cups: can also be used to replace/upgrade XR-series GXP systems. TV-2110/2122 includes (2) 2.5mm spacers to fit either 68mm or 73mm BB shells. Choose: English (1.37"x24tpi LH/RH) or Italian (M36 x 24tpi RH/RH) threads. torque 25-30 ft/lbs. BB-Cup tool s...>> more >>
|
| CBO Price: $40.00 - $230.10 | |
|
|
|
|
by Truvativ
|
|
|
|
Square LE: heat treated CrMo JIS square-taper spindle with M8 (crank mount) thread bore and CNC machined alloy cups/spacer-shell: (325g). Sealed cartridge bearings with single-insert stop (chainline control). English (1.37"x24tpi LH/RH) threads fit 68mm; or 68mm E-type, and 73mm shell widths (no 73mm E-type).Features:Sealed cartridge bearingsSquare taper spindle
|
| CBO Price: $18.00 - $19.00 | |
|
|
|
|
by Truvativ
|
|
|
|
SRAM Cranksets
|
|
|
|
|
by Truvativ
|
|
|
|
Howitzer XR: heat treated CrMo Howitzer-spline/taper spindle with M12 (crank mount) thread bore and aluminum cups with plastic shell-spacer . Lighter weight version (M15 bolt: larger bore) offered for 51mm chainline (not to be used for DH/Freeride/Extreme riding). Fits 2006+ Holtzfeller and Hussefelt cranksets with Howitzer-specific bottom bracket interface. Dual, oversized 'external-type' sealed cartridge bearing design. English (1.37"x24tpi LH/RH) threads for 68mm and 73mm shell widths (al...>> more >>
|
|
|
|
|
by Truvativ
|
|
|
|
TruVativ Crank/Bottom Brackets Sets
|
| CBO Price: $220.00 - $225.00 | |
|
|
|
|
by Truvativ
|
|
|
|
7075-T6 aluminum with black (2012+) hard anodized (replaces '07/08 'HGA' hard-grey anodized finish)
Middle rings have PowerGlide ramps, outer rings have PowerGlide pins/ramps
For road 2x10 and Track/Singlespeed, see SRAM road chainring listings
|
| CBO Price: $20.00 - $55.00 | |
|
|
|
