|
|
Chain Tool by Park Tool
|
|
|
|
Park's CT-2 is designed for fast easy removal or repair of chains. The tremendous leverage generated removes even the toughest rivets. To use, simply put the chain roller in the built-in recess and squeeze the handles
|
| CBO Price: $74.95 msrp: $89.95 Save 17% | |
|
|
|
|
Chain Tool by ProGold
|
|
|
|
Finally! An accurate, inexpensive chain gauge that shows percentage of chain wear-elongation. Why settle for a gauge that only tells you when your chain is bad? Enjoy the advantage of choosing when to replace your chain before it becomes a problem
|
| CBO Price: $19.99 msrp: $24.00 Save 17% | |
|
|
|
|
Chain Tool by Park Tool
|
|
|
|
Complete chain cleaning kit includes CM-5 Cyclone Chain Scrubber machine, GSC-1 GearClean cassette/derailleur brush, and (1) 8oz Citrus ChainBrite cleaning solution (up to 10 speed chain compatible). Rebuild kit includes (1) large side-scrubber brush 327, (2) roller brushes 328-2, (2) wicking exit sponges 329
|
| CBO Price: $8.95 msrp: $10.49 Save 15% | |
|
|
|
|
Chain Tool by Rohloff
|
|
|
|
Easy to use tool for checking chain wear
|
| CBO Price: $36.00 msrp: $40.00 Save 10% | |
|
|
|
|
Chain Tool by Rohloff
|
|
|
|
Rohloff developed the HG-IG Check tool to be able to quickly determine the condition of Shimano HG or IG cassette sprockets. The tool will indicate when the cogs are on the verge of being too worn out, therefore preventing chain skipping. Cassette cogs should be checked before long trips or before replacing a chain to determine if the new chain will skip on the old cogs
|
| CBO Price: $35.91 msrp: $39.90 Save 10% | |
|
|
|
|
Chain Tool by KMC
|
|
|
|
Stainless hardened metal body chain checker measures up to 2.5mm elongation and fits all chains including 11 speed
|
| CBO Price: $77.31 msrp: $85.90 Save 10% | |
|
|
|
|
Chain Tool by Shimano
|
|
|
|
TL-CN27: molded composite and metal construction (sized for shop use) . For Shimano HG/IG/UG chains 7,8,9,10 speed compatible
|
| CBO Price: $11.71 msrp: $13.01 Save 10% | |
|
|
|
|
Chain Tool by Topeak
|
|
|
|
The Super Chain Tool is designed for use with Shimano HG and most other chains
|
| CBO Price: $16.16 msrp: $17.95 Save 10% | |
|
|
|
|
Chain Tool by Park Tool
|
|
|
|
Many derailleur chains use a "master link" that allows the chain to be installed and removed by hand. While this type of masterlink doesn't require a traditional chain tool, over time, dirt and corrosion can make it difficult to separate by hand. Park's MLP-1 Master Link Pliers make removal and replacement of these masterlinks quick and effortless. Simply insert the specially sized jaws into the masterlink and squeeze the handles
|
| CBO Price: $14.49 msrp: $15.95 Save 9% | |
|
|
|
|
Chain Tool by Park Tool
|
|
|
|
To alleviate poor shifting and uneven drive train wear, most manufacturers recommend chain replacement at or before 1% stretch. Now you can quickly and accurately determine the wear and stretch of any chain with the Park Tool Chain Checker CC-2. Simply insert the Chain Checkers pins into two links, press the swing arm gauge tight, and then check the gauge window for an accurate reading
|
| CBO Price: $9.95 - $26.95 msrp: $10.69 - $29.49 Save 9% | |
|
|
|
|
Chain Tool by Park Tool
|
|
|
|
Park's CM-5.2 Cyclone Chain Scrubber uses an extra large solvent reservoir and a series of rotating brushes to get chains really clean. A magnet at the bottom of the Cyclones solvent reservoir draws particles scrubbed from the chain, effectively keeping them from being redistributed on the chain during cleaning. Durable sponge material draws solvent from the chain as it exits the Cyclone, reducing drips and mess. To make it easy to control and use, weve even added a handle. Works with all multi-...>> more >>
|
| CBO Price: $24.95 msrp: $26.49 Save 6% | |
|
|
|
|
Chain Tool by Ice Toolz
|
|
|
|
For Shimano compatible HG-UG-IC chains, up to 9-speed chains
|
| CBO Price: $5.95 msrp: $6.00 | |
|
|
|
|
Chain Tool by Cyclo
|
|
|
|
Cyclo Chain Tools
|
|
|
|
|
Chain Tool by Park Tool
|
|
|
|
Specially designed to work with the tight tolerances and narrow profiles of 10- and 11-speed chains, but also works on all other derailleur chains, including the Shimano® CN-9000. The CT-4.3 is a powerful, precise tool designed to quickly and accurately remove and install chain rivets. Without a doubt the most accurate chain tool we’ve ever built!
Integrated Link Pocket ensures precise alignment
Replaceable, rotating pin
Perfectly contoured cushioned handles
Precisely machined investment c...>> more >>
|
|
|
|
|
Chain Tool by Park Tool
|
|
|
|
Now 11-speed compatible, the CT-6.3 removes and install chain pins in all derailleur chain. Smooth and powerful, this handy take along is encased in a stainless steel shell, which becomes a comfortable handle when opened. Also included is a peening anvil that allows for peening of Campagnolo® 11-speed chains which pivots out of the way when not in use.
Cast steel body with stainless steel case
Replaceable pin (part # 985-1C)
Works on 5 to 11-speed derailleur chains
Foldable peening anvil
|
|
|
|
|
Chain Tool by Park Tool
|
|
|
|
Specifically designed to work with narrow profile, tight tolerance, 10sp chains (not compatible with Wipperman chains). Quickly removes and installs the toughest chain pins. Integrated link pocket to insure precise alignment. Replaceable rotating pin (PK-7806). Contoured cushioned handles with precision machined body and components
|
|
|
|
|
Chain Tool by Campagnolo
|
|
|
|
Designed specifically and required to install Campagnolo 10 speed chains and 10 speed HD-Links. CP-99277: replaceable chain pin . CP-99279: clamping pin for the UT-CN200, required for proper chain tool function and chain pin installation
|
| CBO Price: $7.90 - $22.50 | |
|
|
|
|
Chain Tool by Park Tool
|
|
|
|
Fits Park Tool's CT-1, CT-2, CT-3, CT-5 and CT-7 Chain Tools. Made from hardened alloy tool steel
|
| CBO Price: $1.70 - $24.00 | |
|
|
|
|
Chain Tool by Ice Toolz
|
|
|
|
Holds the chain while the pin or quick connect is installed
|
|
|
|
|
Chain Tool by Park Tool
|
|
|
|
Park CT-3.2 Chain Tools
Updated for 2013. The CT-3.2 features an adjustable locating shelf so it will remove and install the chain rivet on any bike chain, from 5 to 11-speed derailleur chains to 1/8"and 3/16" single-speed chainsMade from investment cast steel, the CT-3.2 has a comfortable to use size and fine thread for making easy work of even the toughest rivetsCT-3.2 will not peen the rivets on Campagnolo 11-speed chains. For these chains, a CT-11/TL8304 Rivet Peening Tool is also required...>> more >>
|
|
|
|
|
Chain Tool by Hozan
|
|
|
|
Shop grade tool adjusts automatically to everything from BMX chain to 11sp Campy
Removes pins, peens pin heads and releases stiff links
Not compatible with some Wippermann chains
|
| CBO Price: $18.25 - $158.25 msrp: $21.90 - $189.90 Save 17% | |
|
|
|
|
Chain Tool by ABI
|
|
|
|
Allows you to swap out chainrings on Cannondale cranks by removing the spider
|
| CBO Price: $54.92 msrp: $65.90 Save 17% | |
|
|
|
|
Chain Tool by Pedros
|
|
|
|
Pedro's Chain Tools
|
| CBO Price: $54.00 - $103.50 msrp: $60.00 - $115.00 Save 10% | |
|
|
|
|
Chain Tool by Shimano
|
|
|
|
TL-CN27: molded composite and metal construction (sized for shop use), for Shimano HG/IG/UG chains 7,8,9,10 speed compatible
TL-CN28: home mechanic chain tool for Shimano 6-11 speed chains (HG-EV/HG-X/HG/IG/UG chain)
Chain Tools that are designed to remove and install pins on Shimano chains.
Designed to remove and install pins on Shimano chainsCompatible with 7-, 8-, 9-, 10- and 11-speed HyperGlide, InterGlide, UltraGlide chainsMolded composite body and metal internals provide durabi...>> more >>
|
| CBO Price: $49.49 - $152.59 msrp: $54.99 - $169.54 Save 10% | |
|
|
|
|
Chain Tool by Hozan
|
|
|
|
Specially designed for releasing a chain connector link or clip
Magnetized body prevents clip from disappearing
|
| CBO Price: $33.25 msrp: $39.90 Save 17% | |
|
|
|
|
Chain Tool by Shimano
|
|
|
|
Measures chain stretch on all 1/2" pitch chains (1/8", 3/32", and 11/128")
|
| CBO Price: $37.71 msrp: $41.90 Save 10% | |
|
|
|
|
Chain Tool by Pedros
|
|
|
|
Pedro's Chain Tool Replacement Pins
Lifetime warranty on all Pedro's tools
|
| CBO Price: $5.40 - $5.85 msrp: $6.00 - $6.50 Save 10% | |
|
|
|
|
Chain Tool by ProGold
|
|
|
|
ProGold Chain Wear Indicators
|
| CBO Price: $21.60 msrp: $24.00 Save 10% | |
|
|
|
|
Chain Tool by Pedros
|
|
|
|
Pedro's Chain Keeper holds the chain off of stays when rear wheel is removed
|
| CBO Price: $13.50 msrp: $15.00 Save 10% | |
|
|
|
|
Chain Tool by Shimano
|
|
|
|
Chainwhip for securing cassette while removing HG-style lockrings. Includes single-tooth 'hook' end of tool for threaded headsets or bottom-bracket lockrings. Updated SR21 model features a rubber-coated handle
|
| CBO Price: $53.99 msrp: $59.99 Save 10% | |
|
|
|
|
Chain Tool by Shimano
|
|
|
|
TL-CN27: molded composite and metal construction (sized for shop use) . For Shimano HG/IG/UG chains 7,8,9,10 speed compatible
|
| CBO Price: $14.65 - $35.53 msrp: $16.28 - $39.48 Save 10% | |
|
|
|
|
Chain Tool by Shimano
|
|
|
|
Chain whip for securing cassette while removing HG-style lockrings
Includes single-tooth 'hook' end of tool for threaded headsets or bottom-bracket lockrings
Works for 6-, 7-, 8-, 9-, 10- and 11-speed cassettesMagnet at the end of the chain secures it against handle when not in useCan install or remove track hub lockrings but can not remove track cogs (see TL6145)Ergonomic rubber-coated handle for a comfortable gripChome plated chrome-moly steel blade for durability and rigidityPrec...>> more >>
|
| CBO Price: $54.29 - $69.29 msrp: $60.32 - $76.99 Save 10% | |
|
|
|
|
Chain Tool by Topeak
|
|
|
|
Pro quality chain tool for use with all multi-speed chains including Campagnolo 11sp
|
| CBO Price: $53.96 msrp: $59.95 Save 10% | |
|
|
|
|
Chain Tool by Topeak
|
|
|
|
Cassette lockring removal and freewheel installation/removal tool
Hardened steel with high leverage padded handle
|
| CBO Price: $31.46 msrp: $34.95 Save 10% | |
|
|
|
|
Chain Tool by Topeak
|
|
|
|
Spring loaded, hardened steel pliers for opening the master link on PowerLink chain
Wire latch holds coated handles together when not in use
|
| CBO Price: $13.46 msrp: $14.95 Save 10% | |
|
|
|
|
Chain Tool by Park Tool
|
|
|
|
Professional quality shop tool. Heat-treated steel with die and/or laser cut openings. Double-ended Y-head profile for proven strength. 15mm-open (Pedal) and chain whip ends
|
| CBO Price: $20.49 msrp: $22.49 Save 9% | |
|
|
|
|
Chain Tool by Campagnolo
|
|
|
|
Designed specifically and required to install Campagnolo 11 speed chains and 11 speed Ultra-Links. CP-99273: clamping pin for the UT-CN300, required for proper chain tool function and chain pin installation
|
| CBO Price: $7.90 - $280.74 | |
|
|
|
|
Chain Tool by Campagnolo
|
|
|
|
Campagnolo Chain Tool Replacement Pins
|
|
|
|
|
Chain Tool by Park Tool
|
|
|
|
Works in conjunction with 10sp chain tooll to service Campagnolo 11sp chain
Used to accurately peen the end of the connecting rivet to prevent chain failure
Note: Will not install or remove chain rivets. Its sole function is to peen and secure the end of the Campagnolo 11-speed connecting rivet; installation and removal must be done with chain tool
|
|
|
|
|
Chain Tool by Park Tool
|
|
|
|
Designed to work like a shop quality 3/32" chain tool on any 5-10 speed chains
Cast steel body with a compact, folding stainless steel case/handle
Extra shelf in casting for loosening tight links
Replaceable pins sold in pairs
|
| CBO Price: $5.00 - $22.49 | |
|
|
|
|
Chain Tool by Park Tool
|
|
|
|
After pressing the special connecting rivet into a Campagnolo 11-Speed Chain and breaking off the pilot, Campagnolo requires the end of the connecting rivet to be "peened" or "deformed" to prevent chain failure. The precision-machined CT-11 is used to accurately perform this critical process
|
|
|
|
|
Chain Tool by Ice Toolz
|
|
|
|
Stainless steel go -no-go chain checker
|
|
|
|
|
Chain Tool by PDW
|
|
|
|
The Mister Sparkle™ chain cleaner removes grit that grinds down chains and sprockets. It's compact and simple to use- no need to remove your chain.
Specifications:
* Dimensions: 7" x 1.5" x 2.5"
* Weight: 4 oz (113 grams)
|
|
|
|
|
Chain Tool by Ice Toolz
|
|
|
|
Pro shop chain tool for Shimano compatible HG-UG-IC chains, Cr-Mo steel. Perfectly for 7, 8, 9, and 10-speed chains. Patented
|
| CBO Price: $32.00 - $34.00 | |
|
|
|
|
Chain Tool by Park Tool
|
|
|
|
Pro/Shop quality investment cast steel construction. Fine thread screw action for smooth, easy operation. Extra shelf in casting for loosening tight links . Vinyl coated arms for comfort and grip. Designed for 3/16" and 1/8" BMX/Freestyle chains (not for 3/32" BMX chains)
|
|
|
|
|
Chain Tool by Park Tool
|
|
|
|
Home/Trail quality, investment cast steel construction. Fine thread screw action for smooth, easy operation. Extra shelf in casting for loosening tight links . Small and light (77 grams) design is great for seat bag. Designed for 1-10 speed (3/32") chains. Hang-card packaging
|
|
|
|
|
