|
Brake+Hardware by Avid
|
|
|
|
Fits Avid Juicy CODE ELIXIR
|
|
|
|
|
Brake+Hardware by Shimano
|
|
|
|
Shimano disc brake adaptors
|
|
|
|
|
Brake+Hardware by Avid
|
|
|
|
G3 Clean Sweep rotor supplied with Elixir brake models (same fearures as G2 Clean sweep, but updated for 2009+). G2 Clean Sweep rotor for all Avid, Juicy and Code hydraulic disc brakes: features Clean Sweep edges that keep pads clean while providing maximum stopping power and cooling (Polygon and Original-round rotors discontinued in 2007 for newer G2 design). Roundagon rotor for '05+ BB-5 *(and '06+ BB-7) mechanical disc brakes. 165mm rotors for 00/01 Avid disc brakes are no longer available...>> more >>
|
| CBO Price: $44.00 - $55.00 | |
|
|
|
|
Brake+Hardware by Avid
|
|
|
|
Features:Avid Hydraulic Line Kit for Code, Code R, Elixir 3, Juicy 3 is genuine replacement 2000mm hose and spares compatible with Avid Code, Code R, Elixir 3 and Juicy 3 hydraulic disc brakes
|
|
|
|
|
Brake+Hardware by Magura
|
|
|
|
Complete master-cylinder and lever assemblies for Magura brakes (hose and/or hose-mount fittings sold separately)
|
| CBO Price: $72.00 - $269.00 | |
|
|
|
|
Brake+Hardware by Avid
|
|
|
|
For 74mm caliper brakes mounting to 51mm International Standard quick release forks.For 160-165mm, 185mm, 203mm in either fronts or rears
|
|
|
|
|
Brake+Hardware by Avid
|
|
|
|
HSX rotors utilize a quiet, heat-shedding design with a stainless rotor mounted to an aluminum carrier (20mm increments for 2012+ brakes can be used on older models if mated with correct caliper sizing adapter): replacing '10/11 CleanSweep-X rotor design
HS1 rotors utilize a quiet, heat-shedding design in all stainless steel (20mm increments for 2012+ brakes can be used on older models if mated with correct caliper sizing adapter)
CleanSweep-X rotors (stock on '10/11 XX brakes) use a stain...>> more >>
|
| CBO Price: $44.00 - $55.00 | |
|
|
|
|
Brake+Hardware by Avid
|
|
|
|
HSX rotors utilize a quiet, heat-shedding design with a stainless rotor mounted to an aluminum carrier (20mm increments for 2012+ brakes can be used on older models if mated with correct caliper sizing adapter): replacing '10/11 CleanSweep-X rotor design
HS1 rotors utilize a quiet, heat-shedding design in all stainless steel (20mm increments for 2012+ brakes can be used on older models if mated with correct caliper sizing adapter)
CleanSweep-X rotors (stock on '10/11 XX brakes) use a stain...>> more >>
|
| CBO Price: $45.00 - $50.00 | |
|
|
|
|
Brake+Hardware by Rav X
|
|
|
|
Allows Post Mounting Calipers to fit IS Mounting.
Fits:
Front Rotor Diameter: 180mm (Upgrade from 160mm to 180mm)
|
|
|
|
|
Brake+Hardware by Avid
|
|
|
|
G3 CenterLock rotors designed to fit 35mm spline-mount hubs with an aluminum carrier mated to a stainless steel braking rotor (lockring not included or available from Avid)
|
| CBO Price: $66.00 - $71.00 | |
|
|
|
|
Brake+Hardware by IRD
|
|
|
|
Simple solution for frames that do not have housing stops
CNC aluminum with two housing stops per guide
|
|
|
|
|
Brake+Hardware by Avid
|
|
|
|
Lever-to-piston pushrods are listed under lever blades & pivot parts
Elixir-CR pad contact adjuster is non-serviceable, use complete MC/lever replacement if needed (AV-5497)
|
| CBO Price: $10.00 - $175.00 | |
|
|
|
|
Brake+Hardware by Goodridge
|
|
|
|
Goodridge patented reusable, stainless steel fittings, no crush-style compression ferrule olives . Coated, stainless steel braided, PTFE inner, hydraulic tubing. Tubing design has an extreme bend radius for no-kink, no-bulge performance which also offers a firmer, more consistent brake feel. Developed from Formula-1, World Rally, and Indy Car racing . Kit #102: (1) M6x1mm-male in-line and (1) M6x1mm 90-degree banjo fittings. Kit #103: (1) M6x1mm-male in-line and (1) M8x.75mm-male in-line fi...>> more >>
|
| CBO Price: $67.90 - $109.90 | |
|
|
|
|
Brake+Hardware by Avid
|
|
|
|
Replacement part for Avid Ball Bearing Disc Brakes
AV-7851/7852 include: torque-arm to body seal, spring, and piston kit with bearings for (1) caliper (pad pressure foot not included)
Avid Mechanical Brake Caliper Parts.
|
|
|
|
|
Brake+Hardware by Hayes
|
|
|
|
Features:Master cylinder bleed screw that fits into cartridgeAllows fitment of bleed adapter enabling system to be bledFits all Comp and Mag systems
|
|
|
|
|
Brake+Hardware by Problem Solvers
|
|
|
|
The Problem Solvers Center-Lock adaptor. No pinch bolt; mounts with included lockring.
Made of AL-6061-T6 extruded, CNC-machined and broachedSpecifically designed to adapt Center-Lock splined disc brake hubs for use with 165mm diameter standard 6-bolt disc brake rotorsLockring included
Item SpecificationsHub/Brake CompatibilityCenter-Lock Disc,6-Bolt Disc...>> more >>
|
| CBO Price: $30.00 Save: $11.85 | |
|
|
|
|
Brake+Hardware by Shimano
|
|
|
|
Pd Rtntn Cotter Pin M601/M585 Ea Y8DB060
|
| CBO Price: $1.16 - $170.91 Save up to: $18.99 | |
|
|
|
|
Brake+Hardware by Shimano
|
|
|
|
Shimano hydraulic brake lever assemblies are cross-compatible: if lever not listed, sub different model and verify needed tubing kit/fittings Replacement MC/lever assemblies do not include tubing (sold separately) Reservoir kits include: reservoir cover, bladder/gasket, and screws
|
| CBO Price: $1.80 - $116.99 Save up to: $13.00 | |
|
|
|
|
Brake+Hardware by Formula
|
|
|
|
Parts and kits for Formula hydraulic brake levers.
|
| CBO Price: $2.70 - $104.27 Save up to: $11.58 | |
|
|
|
|
Brake+Hardware by FSA
|
|
|
|
FSA SL-K Cantilever brake sets feature 40mm arms, stainless hardware and one bolt pad adjustment.
40mm armsIntegrated barrel adjusterStainless hardwareOne-bolt pad adjustmentAdjustable spring tension
Item Specifications- FrontColorBlackUnit of SaleSetWeight113gMaterialAluminumBrake Usage F/RFrontPadCartridgeHub/Brake CompatibilityRim BrakeBrake TypeCantileverBrake Lever ActuationShort Pull,Short Pull Super SLRItem Specifications- RearColorBlackWeight113gMaterialAluminumBrake Usage F/RRearPadCart...>> more >>
|
| CBO Price: $116.99 - $135.00 Save up to: $15.00 | |
|
|
|
|
Brake+Hardware by Hope
|
|
|
|
Hope Disc Brake Caliper and Levers
Rotors not includedPre-bled system uses DOT 5.1 brake fluidCNC-machined in Barnoldswick, England, from AL-2014-T6Uses lightweight, black, polyester-reinforced lineOne-piece 74mm post-mount calipers with pistons prevent heat transferSplit clamp design allows for quick adjustment and the lightweight machined alloy lever features a textured grip areaLever reach is adjustable via an Allen keyLevers are right- or left-hand specificFor race, cross-country or trail us...>> more >>
|
| CBO Price: $186.91 Save: $20.77 | |
|
|
|
|
Brake+Hardware by Hope
|
|
|
|
Hope Tech Evo M4 Disc Brake Caliper and Levers
Pre-bled system uses DOT 5.1 brake fluidCNC-machined in Barnoldswick, England, from AL-2014-T6Uses lightweight, black, polyester-reinforced lineOne-piece 74mm post-mount calipers with pistons prevent heat transferFor trail, enduro, all-mountain or light freeride use; four 16mm pistonsDoes not include rotors or adapters
Item Specifications- CaliperBrake Usage F/RRearHub/Brake Compatibility6-Bolt DiscBrake TypeDiscBrake Lever ActuationHydraulicCaliper...>> more >>
|
| CBO Price: $211.04 Save: $23.45 | |
|
|
|
|
Brake+Hardware by Hope
|
|
|
|
Hope Tech Evo X2 Disc Brake Caliper and Levers
Rotors and adaptors not includedPre-bled system uses DOT 5.1 brake fluidCNC-machined in Barnoldswick, England, from AL-2014-T6Uses lightweight, black, polyester-reinforced lineOne-piece 74mm post-mount calipers with pistons prevent heat transferExternal, tool-free lever reach adjustment and brake pad contact (Bite Point)Ambidextrous (flip-flop) design with split clamp, two reservoir caps and bearing lever pivotsFor cross-country, trail or light all-...>> more >>
|
| CBO Price: $186.91 Save: $20.77 | |
|
|
|
|
Brake+Hardware by Rohloff
|
|
|
|
Rohloff Speed Hubs Brake Rotor Features:Specific to Rohloff Speedhubs: larger 4-bolt/65mm-BCD patternRotors work with most 160-203mm brake systems
|
| CBO Price: $116.91 Save: $12.99 | |
|
|
|
|
Brake+Hardware by Rohloff
|
|
|
|
Specific to Rohloff Speedhubs: larger 4-bolt/65mm-BCD pattern. Wavey models to work with most 160/203mm brake systems
|
| CBO Price: $8.91 - $116.91 Save up to: $12.99 | |
|
|
|
|
Brake+Hardware by Formula
|
|
|
|
Formula RO Disc Brake Caliper and Levers
All calipers have a standard 74mm mounting-bolt spacingAll levers are right- or left-hand mountableTop and bottom vented caliper bodies for maximum cooling and performanceRemovable handlebar clampRotors and adaptors sold separatelyIntended use: all-mountain, enduro, freeride, downhillOval piston technology allows for a compact caliper design with increased piston size for increased power with decreased weightForged lever blade with integrated tool-free re...>> more >>
|
| CBO Price: $323.55 - $330.26 Save up to: $36.69 | |
|
|
|
|
Brake+Hardware by Formula
|
|
|
|
Formula R1/R1 Racing Disc Brake Caliper and Levers
All calipers have a standard 74mm mounting-bolt spacingAll levers are right- or left-hand mountableTop and bottom vented caliper bodies for maximum cooling and performanceRemovable handlebar clampRotors and adaptors sold separatelyIntended use: race, cross-country, trailNew lever-integrated tool-free reach adjust (TFRA)
Item Specifications- CaliperBrake Usage F/RFrontHub/Brake Compatibility6-Bolt DiscBrake TypeDiscBrake Lever ActuationHydraulicC...>> more >>
|
| CBO Price: $278.55 - $341.55 Save up to: $37.95 | |
|
|
|
|
Brake+Hardware by Formula
|
|
|
|
All calipers have a standard 74mm mounting-bolt spacingAll levers are right- or left-hand mountableTop and bottom vented caliper bodies for maximum cooling and performanceRemovable handlebar clampRotors and adaptors sold separatelyIntended use: cross-country, trail, all-mountain, enduroOne-piece caliper body with 22mm pistons
Item Specifications- CaliperBrake Usage F/RFrontHub/Brake Compatibility6-Bolt DiscBrake TypeDiscBrake Lever ActuationHydraulicCaliper Type74mm Post MountHydraulic Hose Leng...>> more >>
|
| CBO Price: $143.55 Save: $15.95 | |
|
|
|
|
Brake+Hardware by Hope
|
|
|
|
Hope Disc Brakes & Levers
Rotors not includedPre-bled system uses DOT 5.1 brake fluidCNC-machined in Barnoldswick, England, from AL-2014-T6Uses lightweight, black, polyester-reinforced lineOne-piece 74mm post-mount calipers with pistons prevent heat transferFor trail, enduro, all-mountain or light freeride use; four 16mm piston caliper
Item Specifications- CaliperBrake Usage F/RRearHub/Brake Compatibility6-Bolt DiscBrake TypeDiscBrake Lever ActuationHydraulicCaliper Type74mm Post MountItem Speci...>> more >>
|
| CBO Price: $211.04 Save: $23.45 | |
|
|
|
|
Brake+Hardware by Hope
|
|
|
|
Hope Disc Brakes & Levers
Rotors and adaptorsnot includedPre-bled system uses DOT 5.1 brake fluidCNC-machined in Barnoldswick, England, from AL-2014-T6One-piece 74mm post-mount calipers with pistons prevent heat transferFor all-mountain, freeride or downhill use; two 25mm pistonsGoodridge stainless braided line, drip-free bleed nippleUse with floating or vented (203mm only) rotor
Item Specifications- CaliperBrake Usage F/RFrontHub/Brake Compatibility6-Bolt DiscBrake TypeDiscBrake Lever Actuation...>> more >>
|
| CBO Price: $241.18 Save: $26.80 | |
|
|
|
|
Brake+Hardware by Jagwire
|
|
|
|
Jagwire Disc Brake Hose Parts
|
| CBO Price: $227.70 Save: $25.30 | |
|
|
|
|
Brake+Hardware by Formula
|
|
|
|
Formula T1 Disc Brake Caliper and Levers.
Includes caliper and leversFront Brake includes 100cm hydraulic lineRear Brake includes 165cm hydraulic lineRotors and adaptors sold separatelyAll calipers have a standard 74mm mounting-bolt spacingAll levers are right- or left-hand mountableTop and bottom vented caliper bodies for maximum cooling and performanceRemovable handlebar clampRotors and adaptors sold separatelyIntended use: downhill race, enduroNew forged aluminum lever-integrated tool-free re...>> more >>
|
| CBO Price: $305.55 - $665.99 Save up to: $74.00 | |
|
|
|
|
Brake+Hardware by Hayes
|
|
|
|
Hayes hydraulic service/small-parts . All in a compartmentalized plastic case with snap lid and separators
|
| CBO Price: $110.70 - $134.82 Save up to: $14.98 | |
|
|
|
|
Brake+Hardware by Formula
|
|
|
|
Refer to individual parts and diagram for items included in kits Lever assemblies and parts are flip/flop in design for left or right use (sold each) Oro series lever blades are interchangeable between models for material, size, or color choice (stock application listed in parenthesis)
|
| CBO Price: $10.80 - $215.91 Save up to: $23.99 | |
|
|
|
|
Brake+Hardware by Hope
|
|
|
|
Stock replacement rotors for Hope disc brakes with International Standard 6-bolt/44mm-BCD rotor mounting . Mono-Mini/M4 aluminum-carrier, 2-piece floating design rotors are interchangable with 1-piece fixed style of the same diameter (1-piece style needed if using CenterLock to 6-bolt adapter). Saw profile rotors (new for 2007) are interchangable with older Mono-series. 2006+ 74mm caliper Mono-series brakes use updated rotor sizes: Mini/M4/M6 use 183/203mm with appropriate adapters instead of...>> more >>
|
| CBO Price: $33.34 - $113.34 Save up to: $12.59 | |
|
|
|
|
Brake+Hardware by TRP
|
|
|
|
Forged/CNC TT6 aluminum linear pull brake with 84mm arms, ideal for Shimano (7800 or earlier), SRAM and Campagnolo levers
Offers greater stopping power than cantilevers matched with road levers
Titanium hardware, 956.12 adjustable toe pad holders with both aluminum an carbon rim compound pads
|
| CBO Price: $134.99 Save: $15.00 | |
|
|
|
|
Brake+Hardware by FSA
|
|
|
|
The ultimate, no compromise cyclocross brake
Massive carbon arms provide excellent power and stiffness
Narrow and wide angle settings
Features adjustable spring tension, an integrated barrel adjuster and titanium hardware
Carbon arms with black and red K-Force graphics
Sold as a front and rear set (includes straddle wires and cartridge pads)
|
| CBO Price: $269.99 Save: $30.00 | |
|
|
|
|
Brake+Hardware by TRP
|
|
|
|
Lightweight alloy Cross brake with stainless and alloy hardware
Semi-low profile design offering impressive stopping power with drop levers
CNC machined Inplace Adjust adjustable angle pad holders with black pads
Spring tension adjusters and barrel adjuster for precise pad setup
|
| CBO Price: $134.99 Save: $15.00 | |
|
|
|
|
Brake+Hardware by TRP
|
|
|
|
Superlight carbon Cross brake with titanium and alloy hardware
Semi-low profile design offering impressive stopping power with drop levers
Red alloy hardware: pad holder bolts, straddle adjuster, straddle carrier and cable fixing units
CNC machined Inplace Adjust adjustable angle pad holders with black pads
Spring tension adjusters and barrel adjuster for precise pad setup
|
| CBO Price: $269.99 Save: $30.00 | |
|
|
|
|
Brake+Hardware by TRP
|
|
|
|
Forged/CNC TT6 aluminum linear pull brake with 95mm arms, optimized for newer Shimano levers, but works with all SRAM, Shimano and Campy levers
Offers greater stopping power than cantilevers matched with road levers
Titanium hardware, Inplace-M adjustable toe pad holders with black pads
|
| CBO Price: $134.99 Save: $15.00 | |
|
|
|
|
Brake+Hardware by TRP
|
|
|
|
Professional-level Cyclocross brake with superlight magnesium cantilever arms and titanium hardware
Open stance for mud clearance and increased braking power with road levers
Red alloy hardware: pad holder bolts, straddle cable adjuster, straddle carrier and cable fixing units
CNC machined Inplace Adjust adjustable angle pad holders with black pads
Also includes an extra set of four pad inserts for carbon rims
|
| CBO Price: $314.99 Save: $35.00 | |
|
|
|
|
Brake+Hardware by TRP
|
|
|
|
Cyclocross brake with lightweight aluminum cantilever arms and stainless hardware
Open stance for mud clearance and increased braking power with road levers
Includes alloy pad holder bolts, straddle adjuster, straddle carrier and cable fixing units
CNC machined Inplace Adjust-F adjustable toe pad holders with black pads
Also includes an extra set of four pad inserts for carbon rims
|
| CBO Price: $134.99 Save: $15.00 | |
|
|
|
|
Brake+Hardware by TRP
|
|
|
|
Superlight, high-leverage carbon fiber cantilever arms and titanium hardware
Design balances heel/shouldering clearance with mud shedding capability
Features a cable barrel adjuster and dual spring tension adjusters
CNC machined Inplace Adjust adjustable angle pad holders with both alloy and carbon rim compound pads
|
| CBO Price: $314.99 Save: $35.00 | |
|
|
|
|
Brake+Hardware by Shimano
|
|
|
|
1-piece (monoblock) forged/machined, opposed 2-piston caliper. 160mm (CL) CenterLock 35mm-splined+lockring or (IS) International-Standard 6-bolt/44mm-BCD rotor mount offerings . Shimano brand mineral oil medium (no DOT 3/4). Includes: post mount (74mm) caliper with adapter, 160mm (RT77S) CenterLock or (RT75S) International-Standard 6-bolt/44mm-BCD rotor, CenterLock rotor lockring (if applicable); and pads. Levers (with hose kits) sold separately, use: SH-50625 M765 dual-control lever/shifter...>> more >>
|
| CBO Price: $156.51 Save: $17.39 | |
|
|
|
|
Brake+Hardware by Shimano
|
|
|
|
(IS): 6-bolt/44mmBCD International Standard, (CL) 35mm CenterLock spline-mount
All rotors include hardware: either 6-bolt or CenterLock lockring+washer (lockrings for thru-axle applications available separately)
RT99 Centerlock rotor optimized for pure gravity. Takes the innovative 3-layer clad rotor to the next level by adding radiator fins. Braking and performance benefits include 20% less brake fade, 20% increase in stopping power and 20% longer pad life
RT98 CenterLock rotors are fo...>> more >>
|
| CBO Price: $116.99 Save: $13.00 | |
|
|
|
|
Brake+Hardware by TRP
|
|
|
|
TRP Parabox Model R Disc Brakes. Parabox "R" model features a more narrow headset spacer mounting than previous Parabox generation.
Master cylinder converts cable actuation to hydraulic braking powerUtilizes olive and un-crimped barb secured banjo fitting for user customization cable lengthsBarrel adjuster on-the-fly brake adjustmentIncludes front and rear specific calipers for max power and minimal weightClamps to steerer tube below the stem for optimal clearanceRotors and hydraulic hosing incl...>> more >>
|
| CBO Price: $422.99 Save: $47.00 | |
|
|
|
|
Brake+Hardware by Formula
|
|
|
|
Replacement parts for servicing Formula hydraulic disc brake calipers
|
| CBO Price: $30.28 - $168.43 Save up to: $18.71 | |
|
|
|
|
Brake+Hardware by Formula
|
|
|
|
Replacement rotors specifically designed for Formula brakes
(IS) 6-bolt/44mm-BCD International Standard or (CL) CenterLock 35mm spline-lock interface
1-piece stainless steel or 2-piece aluminum carrier options
|
| CBO Price: $39.50 - $103.50 Save up to: $10.75 | |
|
|
|
|
Brake+Hardware by TRP
|
|
|
|
TRP Eurox Cantilever Brakes
Magnesium cantilever brake with open design for mud clearance and use with road leversPads are factory installed for rear wheel. For front wheel interchange the padsIncludes alloy cable hanger, straddle cable, Ti hardware and extra set of carbon fiber brake pads
Item Specifications- FrontColorWhite/RedUnit of SaleSetWeight206gBrake Usage F/RFrontPadCartridgeHub/Brake CompatibilityRim BrakeBrake TypeCantileverBrake Lever ActuationShort Pull,Short Pull Super SLRItem Spe...>> more >>
|
| CBO Price: $314.99 Save: $35.00 | |
|
|
|
|
Brake+Hardware by Shimano
|
|
|
|
Shimano Disc Calipers
Single 74mm caliperFrame or fork mount adaptor not includedIcetech metal pads with radiator cooling finsOne-way bleed feature for easy setup
Item SpecificationsFitsXT M785
|
| CBO Price: $67.49 - $179.99 Save up to: $20.00 | |
|
|
|
