Single bolt MatchMaker-X compatible handlebar clamp design for easy install/removal (includes both hinged MatchMaker-X, and minimalist stand-alone clamps)Updated, flip-flop aluminum lever body with a high-volume integrated reservoir, Airtrap porting, and TaperBore piston technology for improved power and modulationPower Reserve geometry (low X-factor) for ergonomic lever travel with detented, tool-free pad contact engagement and reach adjust Forged aluminum, twin-piston caliper design with drag-...>> more >>
Single bolt MatchMaker-X compatible handlebar clamp design for easy install/removal (includes both hinged MatchMaker-X, and minimalist stand-alone clamps)Updated, flip-flop aluminum lever body with a high-volume integrated reservoir, Airtrap porting, and TaperBore piston technology for improved power and modulationPower Reserve geometry (low X-factor) for ergonomic lever travel with detented, tool-free pad contact engagement and reach adjust Forged aluminum, twin-piston caliper design with drag-...>> more >>
MatchMaker compatible handlebar split-clamp for easy install/removalFlip-flop lever body with an integrated reservoir and exclusive TaperBore master cylinder technology for improved power and modulationExternal, 2.5mm indexed lever reach adjustmentDual, large-piston caliper design with drag-free pad retraction, top loading pads, inline tubing attachment, and a drip-free bleeding systemFull hydraulic (DOT 5.1) system automatically adjusts for pad wearTri-Align Caliper Positioning System (CPS) for...>> more >>
Mtn version for use with linear pull brake levers (sold separately)
Tri-Align Caliper Positioning System (CPS) for easy caliper/rotor alignment
Sleek body design with a fully sealed Ball Bearing mechanism and integrated cable stop
Dual pad adjuster knobs and full pad retraction for drag free setup
Tool-free pad adjustment and replacement (same pads as Juicy)
Includes: post mount (74mm) caliper with International-Standard (51mm) fork and frame adapters, G2 CleanSweep 6-bolt/44mm-...>> more >>
MatchMaker-X compatible handlebar hinge-clamp for easy install/removalUpdated, Elixir-7 inspired flip-flop lever body with a high-volume integrated reservoir, Airtrap porting, and TaperBore piston technology for improved power and deep-stroke modulationPower Reserve (low X-factor) geometry for ergonomic lever travel and a tool-free reach adjusterLighter, 2-piece forged aluminum caliper with a dual diameter / 4-piston design for added power and modulation, plus a center-mount banjo for crash prot...>> more >>
X.0 Trail
Sealed lever pivot bearings
4-Piston dual-diameter (16mm, 14mm) caliper
All other features are shared with Elixir X.0
All calipers have 74mm mounting-bolt spacing and include adaptors for 51mm International Standard brake mounts, all levers are right- or left-hand mountable
Avid X.0 Trail Disc Brakes & Levers
Rotor includedAll calipers have 74mm mounting-bolt spacing and include adaptors for 51mm International Standard brake mounts, all levers are right- or left-hand mountableSealed lever pivot bearings4-Piston dual-diameter (16mm, 14mm) caliperAll other features are shared with Elixir X.0
Item Specifications- CaliperBrake Usage F/RRearHub/Brake Compatibility6-Bolt DiscBrake TypeDiscBrake Lever ActuationHydraulicRotor Size180mmCaliper Type74mm Post MountHydraulic H...>> more >>
Single-bolt handlebar split-clamp for easy install/removal (MatchMaker-X upgradeable)
Flip-flop lever body with an integrated reservoir, TaperBore piston, and AirTrap technologies for improved power, modulation, and servicability
External, 2.5mm indexed lever reach adjustment
Dual, large-piston caliper design with drag-free pad retraction, top loading pads, angled tubing attachment, and a drip-free bleeding system
Full hydraulic (DOT 5.1) system automatically adjusts for pad wear
...>> more >>
Product Details* PTFE hose kit for both front and rear brakes* Includes all parts to service hose installation with fitting instructions
Product InfoHH1-3 • Shimano • Pink
Stop your XC racer with the powerful and light Shimano XTR M975 Disc Brake Rotor. This CenterLock rotor features high stopping power, and lightweight stiff aluminum carrier that quickly dissipates heat build up.
Hydraulic non-integrated lever for use with Shimano hydraulic disc brakes. Obviously preferable if you insist on using separate trigger or twist shifters
Magura HS 77 Black brake pads for Normal Conditions and Grey for Hard Anodized..
Stahl-und keramikbeschichtete Felgen for steel, ceramic and black coated aluminum rims
The New Magura Gustav M Slotted rotor will now help you replace your damaged or worn rotor. This rotors fits all brake system that take a 180mm rotor. For Standard IS 6-bolt mounting.
Green Crosscountry-Trekking grade for general use Red High Friction "Soft" compound for Downhill Race use only Gold High durability sintered metal compound for longer life in arduous conditions such as wet riding or use in mud or sand. NOT to be used for Downhill race use unless system is fitted originally with gold (sintered) brake pads to avoid brake overheating
Gold (HH): super-high friction, high heat (longer lasting) sintered bronze metallic compound with diamond ground surface for wet/extreme conditions (due to high heat generation, HH-Gold compound is not for Hydraulic/DH race use unless OE specified). Red (R): high friction, low heat (faster wearing) Kevlar based, semi-metallic soft compound for DH racing. Green: med-high friction (medium wearing) Kevlar based, organic compound for XC/all-purpose (no squeal).Features:Green: General cross-country...>> more >>
This is a Pre-Bled ST-M766 LEFT AND RIGHTshift-brake combo with BR-M765 FRONT AND REAR brake calipers.There are 160MM ROTORS INCLUDED in this kit. Kit contentsinclude-ST-M766 STI LeversShimano shift inner wire and cable endBR-M765 brake calipersBH-63 hose pre-bledStandard mount adapters for 160mm rotor(4) adapter mounting bolts w-washersM07S Resin brake padsBrake pad spacerSpacer for bleeding(4) caliper mounting bolts w-washers(6) Stop RingRelease lever cap fixing screw for ST-M766THIS SYSTEM CO...>> more >>
The New Magura SL rotor will now help you replace your damaged or worn rotor. This rotors fits all brake system that take a 180mm rotor. For Standard IS 6-bolt mounting.
Magura SL (drilled) are stainless steel construction with mud clearing waves and heat dissipating holes (used for Gustav-M, Louise and Julie models).
High-performance cable system that replaces galvanized, other coated and stainless steel cables. Patented cable coating technology designed for low friction and durability
Gold (HH): super-high friction, high heat (longer lasting) sintered bronze metallic compound with diamond ground surface for wet/extreme conditions (due to high heat generation, HH-Gold compound is not for Hydraulic/DH race use unless OE specified). Red (R): high friction, low heat (faster wearing) Kevlar based, semi-metallic soft compound for DH racing. Green: med-high friction (medium wearing) Kevlar based, organic compound for XC/all-purpose (no squeal).Features:Green: General cross-country...>> more >>
The ultimate superlight temptation! Tech features-No compromise fully hydraulic disc brake. Open system with reservoir. Dual piston fixed caliper with automatic pad wear adjustment. Carbon brake lever blade with reach adjust on an Aluminum brake lever body. Brake hose can be easily shortened. Lightest XC disc brake available Choose Front or Rear IS, or Manitou Postmount 74. 324g
CBO Price: $164.99 - $179.99 msrp: $327.95 Save 50%
Works for all Formula Oro, One, and Mega brakes with 74mm calipers. IS: 51mm (International Standard) tab mount, PM: 74mm post mount. Adapters to fit 160mm, 180mm, 200mm and 220mm rotors.Features:Formula brake sets are sold without rotor or adaptor. These adaptors do not include rotors.
For use only on road bikes, this high performance cable system replaces galvanized, stainless steel, and other coated cables. Patented cable coating technology designed for low friction and durability.
Shimano/SRAM/Campy end typeSystem includes coated low friction cables, cable housings, crimp caps, and ferrulesIncludes cable terminations compatible with both Shimano/SRAM road brake levers and Campagnolo road brake levers.Includes 2500mm of housing
Item SpecificationsColorRedCableRoad...>> more >>
The Motolite is here to stay. The design of this product is so nearly perfect that there is no foreseeable reason to ever change it.The pivot mechanism has an excellent track record (first used in 1990), the quick-release (releasing the cable for wheel changes) works so well, and is so simple the only reason it isn't widely copied is because Shimano doesn't use it
Hayes 9" Disc Rotors with adaptors. 9" provides 15% more power than 8" rotors. Only for use with approved forks. Check with the fork manufacturer for compatibility
Magura Venti Disc Brake Rotor is Magura's NEW self-cooling rotor. When disc brakes are applied, the friction causes heat that can warp and damage your rotor. The Venti is an incredible new rotor that has a center fan designed to keep temperatures down on your braking system
Super lightweight and rigid single forged caliper. User friendly mineral oil. Powerful dual opposed piston design. Center Lock System mounts rotor to the hub quickly through a spline and lock ring mechanism
The feel and power of the Racer brake is awesome! The mounting bosses on this brake are spread to 77mm and will take a wide tire or tire fender combo.We are now making a center mount version in addition to th braze-on. Yes, we said in various publications we wouldn't do it, but now we've caved. This version comes in a front and rear. They are designed for recessed mounting holes in the seat stay bridge and fork. If you do not have these, longer mounting nuts are available.Both versions come with...>> more >>
Hayes' ultra-light weight brake system retains all the stopping power of it's sister-series brakes (Stroker Trail and Carbon) while shedding material and weight
Designed for v-brakes or mechanical disc brakes
AL6066-T6 machined alloy construction
Weight: ~ 50 g pair
Uses a derailleur wire instead of brake wire
(Uses a derailleur cable instead of a brake cable for additional weight savings)