|
Drivetrain by North Shore Billet
|
|
|
|
North Shore Billet Crank Spiders
The NSB 2x10 Spider replaces the stock chainring spider so that you can run smaller chainrings on Truvativ X0 & X9 cranksNSB 2x10 Spider is designed to use any standard 104 BCD 9 speed chainringsChainline is the same as the stock 120 BCD spider
Item SpecificationsColorBlackFitsSRAM X0 GXP...>> more >>
|
|
|
|
|
Drivetrain by Campagnolo
|
|
|
|
Ultra Drive design to optimize shifting performance . Cogs are steel with a galvanized treatment. Ultra-Drive 10-speed compatible fits Campagnolo 9/10-speed freehubs. Lockrings included. 250g.Features:Lockring not includedSteelSplines only fit 9/10-speed hubs and wheelsCassettes do not include lockring (except 11t models)
|
|
|
|
|
Drivetrain by Bionicon
|
|
|
|
Claimed to be the lightest chain guide available for XC/Trail use
Simple, quiet, smooth chain retention; zip-ties quickly onto a variety of chainstays
Split design fits over the gear cable and chain, no disassembly required
Pivoting chain tube follows the chainline on 2 or 3 chainring setups
|
|
|
|
|
Drivetrain by Bionicon
|
|
|
|
Replacement chain guide tube for C.Guide v.02
|
|
|
|
|
Drivetrain by Campagnolo
|
|
|
|
Composite and alloy body construction for Campagnolo 9-speed drivetrains. Short and medium cage applications
|
|
|
|
|
Drivetrain by Campagnolo
|
|
|
|
Composite body with silver or black anodized aluminum shift and brake lever
Ergonomic hood design follows the asymmetry of the hand, increasing the contact area of the palm and offering multiple riding positions
11 speed ergonomic brake lever features a high fulcrum, which allows for easier reach, better braking and control in all situations. A special insert for riders with large hands increases the lever distance by 8%
Ergopower Power-Shift rear controls can shift the chain simultan...>> more >>
|
|
|
|
|
Drivetrain by Campagnolo
|
|
|
|
Updated Z-shape inner plate for greater rigidity, faster and more precise shifting
M-brace body design and geometry that is compatible with compact or traditional chainring combinations
Ultra-Shift steel outer and inner cages with anti-friction and anti-rust treatments
Braze-on fits frames with pre existing front derailleur braze-on *(can also be used with 31.8mm or 34.9mm band-clamp adapters), or use pre-sized band-clamp versions with the Even-O load distributing clamp. 92g (braze-on)
|
|
|
|
|
Drivetrain by Campagnolo
|
|
|
|
The fulcrum of the 11-speed system. An absolute innovation
11-speed parallelogram geometry operates with absolute precision
Anodized die-cast lightened aluminum upper body and parallelogram link, which confers 150% greater torsional rigidity
Updated black anodized alloy B-bolt assembly
Light alloy outer and inner cages with specially lightened anti-vibration pulleys for maximum smoothness
Short cage (55mm pulley-pulley axle dimensions) or medium+ cage (82mm pulley-pulley axle di...>> more >>
|
|
|
|
|
Drivetrain by Campagnolo
|
|
|
|
Updated Z-shape inner plate for greater rigidity, faster and more precise shifting
M-brace body design and geometry that is compatible with compact or traditional chainring combinations
Power Shift chrome-plated nickel outer and inner cages
Braze-on fits frames with pre existing front derailleur braze-on *(can also be used with 31.8mm or 34.9mm band-clamp adapters), or use pre-sized band-clamp versions with the Even-O load distributing clamp
92g (braze-on). Choose deep black or bl...>> more >>
|
|
|
|
|
Drivetrain by Campagnolo
|
|
|
|
Updated parallelogram geometry operates with absolute precision
Anodized die-cast aluminum upper body and with a anodized parallelogram link, which confers 150% greater torsional rigidity
Light alloy outer and inner cages with specially lightened anti-vibration pulleys for maximum smoothness
Short cage (55mm pulley-pulley axle dimensions), medium cage (72.5mm pulley-pulley axle dimensions) or long cage (89mm pulley-pulley axle dimensions)
|
| CBO Price: $190.00 - $200.00 | |
|
|
|
|
Drivetrain by IRD
|
|
|
|
Compatible with Shimano, SRAM, and Campy 5-10sp cassettes
Hinged alloy clamp for easy installation
Mounts to 24.0 or 22.0 bars (MTB or Road)
|
|
|
|
|
Drivetrain by Gusset
|
|
|
|
Lightweight, flex-free 5mm thick CNC machined 7075 aluminum
No ramps or pins, ideal for Singlespeed or Downhill
|
|
|
|
|
Drivetrain by Gusset
|
|
|
|
Machined aluminum chain retention device with GRP cage, replaces front derailleur
Adjustable chainline. 34.9mm hinged seattube clamp, 31.8mm shims included. 50g
|
|
|
|
|
Drivetrain by Gusset
|
|
|
|
CNC machined aluminum upper chain guide with high-density composite cage
For use with single front ring and rear cassette, bottom bracket mounted
|
|
|
|
|
Drivetrain by Gusset
|
|
|
|
CNC machined aluminum upper/lower chain guide with high-density composite cages
For use with single front ring and rear cassette, cartridge bearing lower roller
Choose ISCG or ISCG-05, both include bottom bracket flanged-cup mount adapter
|
| CBO Price: $79.95 - $89.90 | |
|
|
|
|
Drivetrain by Genetic
|
|
|
|
Adapts SRAM road (24>22mm) or Shimano road (24mm) cranks to a BB30 (68x42mm) frame
Includes sealed cartridge bearings, inner spacer tube, CNC alloy spacers and circlips
|
|
|
|
|
Drivetrain by Spank
|
|
|
|
Converts any 8-10sp HG splined cassette hub to an 11t Singlespeed
|
|
|
|
|
Drivetrain by Blackspire
|
|
|
|
The only bash guards offering protection for 2x drivetrains with odd BCDs
Anodized with laser etched graphics, CNC machined 6061 T-6 aluminum construction and includes custom mounting hardware
120BCD: XX/XO/X9/X7 2x cranks
88BCD: XTR M985 2x cranks
104BCD: XT M785 2x cranks
|
| CBO Price: $72.00 - $87.96 | |
|
|
|
|
Drivetrain by Endless Bike
|
|
|
|
Machined 7075-T6 aluminum singlespeed cogs
Wide base prevents the cog from digging into freehub bodies and reduces flex
Splines are machined for perfect alignment and fit on all mountain cassette hubs
The shape, width, and height of the teeth are CAD designed and optimized for Singlespeed use with 3/32" chains (1/8" OK)
The design offers more contact with the chain rollers for better wear resistance of both the cog and the chain
Positive engagement prevents chain slippage and mak...>> more >>
|
|
|
|
|
Drivetrain by Endless Bike
|
|
|
|
Single speed conversion with different size machined aluminum spacers allowing plenty of chain line adjustment (+/
1mm)
|
| CBO Price: $43.00 - $49.90 | |
|
|
|
|
Drivetrain by Blackspire
|
|
|
|
For use with Shimano XTR M980 crankset
CNC machined 7075-T6 aluminum
Anodized grey with laser etched graphics
Modified shift gates and profiles improve shift performance
|
| CBO Price: $27.09 - $100.08 | |
|
|
|
|
Drivetrain by Blackspire
|
|
|
|
For use with SRAM/Truvativ XX/XO/X9/X7 cranksets
CNC machined 7075-T6 aluminum
Anodized grey with laser etched graphics
Modified shift gates and profiles improve shift performance
|
| CBO Price: $27.00 - $108.00 | |
|
|
|
|
Drivetrain by Blackspire
|
|
|
|
For use with Shimano XTR M985 crankset
CNC machined 7075-T6 aluminum
Anodized grey with laser etched graphics
Modified shift gates and profiles improve shift performance
|
| CBO Price: $37.95 - $108.24 | |
|
|
|
|
Drivetrain by SRAM
|
|
|
|
4mm and 5mm ferrules for derailleur and/or brake cable housing
Available in either "open" profile for exposed cables, or "nosed" for shielding cables with an external liner
|
| CBO Price: $87.00 - $105.00 | |
|
|
|
|
Drivetrain by SRAM
|
|
|
|
Compact profile, inline barrel adjuster for changing cable tension en route
Kit includes: 2) barrel adjuster units, 2) short double-capped casing sections (for positioning adjuster from housing-stop)
|
|
|
|
|
Drivetrain by SRAM
|
|
|
|
1-piece arm/spider design comprised of Uni-Directional carbon fiber over a forged AL-66 aluminum spine with a drive-side integrated 30mm-aluminum (BB30) or 24mm-steel (GXP) bottom bracket spindle
*BB30 and PF30 bearing sets sold separately (see listings in Truvativ)
*GXP and BB86-GXP adapter cupsets sold separately (see listings in Truvativ)
Updated (Red-inspired, non-Yaw), reinforced PowerGlide black anodized 7075-T6 alloy chainrings with ramps/pins and alloy chainring bolts
645/75...>> more >>
|
|
|
|
|
Drivetrain by Truvativ
|
|
|
|
Lightweight DH-race design born from the BlackBox program on the World Cup circuit
1-piece hollow-forged (OCT) 7050-T6 aluminum arms with integrated 4-arm spider (can be used with separate bashguard and/or chainguide systems)
Optimized Q-factor with a 51mm chainline and an integrated GXP (Giga X Pipe) 24mm or Press-Fit30 (PF30) 30mm bottom bracket spindle for maximized stiffness with reduced weight
GXP Team cartridge bearing bottom bracket included for either 68/73mm or 83mm threaded sh...>> more >>
|
|
|
|
|
Drivetrain by Campagnolo
|
|
|
|
EPS, Electronic Power Shift, electronic shifters. These shifters require specific, separate EPS wire harness, battery pack, and front/rear derailleurs
Features a simple click to control the derailleurs, keeping the rider in aerodynamic at all times
The levers have an adjustable starting position to fit all type of bars and the best personal hand position
Weight relieved 'Double Shape' levers have optimal ergonomics that reduce shifting effort
Specially designed levers are short to co...>> more >>
|
|
|
|
|
Drivetrain by Gusset
|
|
|
|
Forged alloy I-Beam arms with added reinforcement for BMX use
Creak-free integrated 4-arm spider for single ring setup (no inner ring mount)
Drive-side integrated 24mm hollow spindle, left-side pinch bolt clamp
Steel pedal thread inserts. 850g (without BB, sold separately)
Chainwheel sold separately: see chainring section for 104mm BCD options
*BB sold separately: use BTI #GU-1050 for 68/73mm needle bearing EXT24 cupset or GU-1051 68/73mm sealed cartridge bearing EXT24 cupset
|
|
|
|
|
Drivetrain by Gusset
|
|
|
|
4 arm 104 BCD single ring spider with offset for improved singlespeed/BMX chainline
Fits Woodstock 853 series spline drive cranks only
CNC 7075 alloy with bonded Cr-Mo Woodstock 48S drive insert and flush finish cover
|
|
|
|
|
Drivetrain by Praxis Works
|
|
|
|
Shimano (24mm spindle) compatible7075 T6 alloy cups feature CNC finishing and standard anodizing
Made with high-grade 6805 Stainless steel fully sealed bearings
Compatible with Shimano Hollowtech II 24mm cranks
|
|
|
|
|
Drivetrain by ABI
|
|
|
|
Adapter bearing set allows you to run a BB386EVO crank on a frame with a BB86/92 shell (only compatible with FSA and Rotor 386EVO cranks, not compatible with other 30mm spindle cranks)
Double row ABEC-3 bearing with sainless steel balls and races
|
|
|
|
|
Drivetrain by Paul Components
|
|
|
|
Paul Components Thumbies turn bar-end shifters into flat-bar shifters.
Thumb shifter mounts: turn bar-end shifters into flat-bar shiftersFor use with 8-, 9- and 10-speed bar-end shifters; shifters not included
|
|
|
|
|
Drivetrain by Parlee
|
|
|
|
This cup set allows Campagnolo Ultra Torque cranks (Chorus, Record and Super Record, Bora Ultra series) to be installed in any PressFit30 compatible frame set without adaptors or spacersSimply press fit these cups in and install crank per Campagnolo instructionsSet includes left and right cups with integrated seals, wave washer and drive side retaining clipThis is an adaptive BB with bearings; There is no need for any other bottom bracket part or adaptor
Item SpecificationsBB/Frame InterfacePF30...>> more >>
|
|
|
|
|
Drivetrain by Raceface
|
|
|
|
RaceFace Crank Boot for carbon cranks. Protects the crank arm from rocks and debris.
Designed to fit Next XC, Next SL and SIXC Crank arms
|
|
|
|
|
Drivetrain by Raceface
|
|
|
|
With RaceFace signature styling, the Ride XC Cranks feature the 'EXI interface' - the newest version of RaceFace's external bottom bracket system delivering superior performance and excellent value.
Net-forged AL-6066Forged and CNC-machined chromoly BB spindleMachined AL-7075 outer chainringEXI interface allows easy installation and removal
Item SpecificationsColorBlackWeight995gBB/Frame InterfaceEnglishSpindle Interface TypeRaceFace EXIPedal Spindle9/16"Chainring BCD104,64mmArm Length170mmRings...>> more >>
|
| CBO Price: $99.99 - $129.99 | |
|
|
|
|
Drivetrain by Raceface
|
|
|
|
RaceFace Turbine Fatbike Crank/Bottom Brackets Sets
Designed for a 67.5mm chainline, which is optimal for 170mm rear dropout spacingTeam XC 100mm BB comes with 3- 2.5mm spacer to fine tune chainlineCompatible with: Salsa Mukluk, Surly Pugsley and Necromancer, 9:Zero:7 frames with 170mm and 135mm offset spacing, Sandman Hoggar Ti, Gobi and AtacamaNot compatible with Surly Moonlander or 9:Zero:7 frames with 186mm rear spacingArms are carefully engineered using ultra high-strength AL-7050 alloy to ...>> more >>
|
|
|
|
|
Drivetrain by Raceface
|
|
|
|
RaceFace Evolve Crank/Bottom Brackets Sets
Net shape-forged AL-6066 arms with forged and CNC machined chromoly BB spindleMachined AL-7075 chainringsExi interface allows easy installation and removalIncludes Team 68/73 bottom bracket
Item SpecificationsColorBlackWeight935gBB/Frame InterfaceEnglishSpindle Interface TypeRaceFace EXIPedal Spindle9/16"Chainring BCD104,64mmArm Length170mmRings22/32/42Crank-FD TypeMountain TripleBB Shell Width73,68mmBB Inclu...>> more >>
|
|
|
|
|
Drivetrain by Raceface
|
|
|
|
RaceFace Crank Arm Tab Spacers
Spacers are used to protect the outer chainring tabs and enhance aesthetic when no outer ring or bashguard is usedFits all Race Face cranksetsUse double bolts
|
|
|
|
|
Drivetrain by Raceface
|
|
|
|
RaceFace Chainstay Protectors
Durable, lightweight nylonEasy on, easy off Velcro closure
Item SpecificationsColorBlack
|
|
|
|
|
Drivetrain by Raceface
|
|
|
|
RaceFace Turbine 10 speed Chainrings
3x10 chainrings are compatible with 9-speed drivetrains if a complete set is used2 x 10 turbine chainrings are designed to fit Race Face and SRAM cranksets and work with SRAM or Shimano drivetrains3 x 10 chainrings are designed to fit Race Face and Shimano cranks and to work with Shimano and SRAM drivetrainsCNC-machined from super-hard AL-7075 to maximize wear resistance and impact strengthNew asymmetrical tooth profiling and more upshift and downshift zones...>> more >>
|
|
|
|
|
Drivetrain by IRD
|
|
|
|
Nickel-chrome plated steel 10-speed cassette with Shimano spline and Campy cogs
Designed to run 10-speed Campagnolo on Shimano spline freehub bodies
|
|
|
|
|
Drivetrain by Versa
|
|
|
|
The Versa VRS-8 Road shifter is an STI-style (Shimano Total Integration) shifter that integrates shifting and braking into a single lever that is mounted onto drop-style road handlebars. The shifter uses independent up/down shifters for smooth precise shifting at any time - while pedaling coasting, or even at a complete stop. The Versa lever set works exclusively with the Shimano Alfine 8 and Nexus 8 internal gear hubs, providing a wide range of gearing from a compact internal hub.
Right lever i...>> more >>
|
|
|
|
|
Drivetrain by Praxis Works
|
|
|
|
Designed for 5-arm 110BCD cranks or 130BCD cranks
One-Shot Cold Forging: Exclusive manufacturing process creates a more complex tooth profile and allows more shifting features on a chainring which normal CNC manufacturing won't allow. Individual tooth profiles, alternating tooth angles, timed ramps and tactically placed shift pins are all jam packed onto a Praxis ring. Process creates a harder and tougher tooth overall durability.
LevaTime: Praxis unique timing and shifting technology. Sev...>> more >>
|
|
|
|
|
Drivetrain by Raceface
|
|
|
|
RaceFace 2012 Light Bash Guard Chainring Guards
Machined from AL-7075Compatible with all current and older Race Face cranks
Item SpecificationsColorBlackMaterialAluminumChainring BCD104mmMax Tooth40teeth...>> more >>
|
|
|
|
|
Drivetrain by Raceface
|
|
|
|
RaceFace Turbine 10 speed Chainrings
3x10 chainrings are compatible with 9-speed drivetrains if a complete set is used2 x 10 turbine chainrings are designed to fit Race Face and SRAM cranksets and work with SRAM or Shimano drivetrains3 x 10 chainrings are designed to fit Race Face and Shimano cranks and to work with Shimano and SRAM drivetrainsCNC-machined from super-hard AL-7075 to maximize wear resistance and impact strengthNew asymmetrical tooth profiling and more upshift and downshift zones...>> more >>
|
| CBO Price: $26.99 - $109.99 | |
|
|
|
|
Drivetrain by Tangent Products
|
|
|
|
Tangent Products 4x104mm BMX chainrings feature Tangent's distinctive styling.
|
|
|
|
|
Drivetrain by Power Cordz
|
|
|
|
Lightest and strongest complete derailleur system utilizing an integrated slick nylon jacket to reduce friction, corrosion and fraying
Integrates with existing derailleur manufacturers (Shimano, SRAM, Campagnolo and MicroShift) for road, mountain, and cyclocross bikes
System includes: (2) 1.2mm derailleur Cordz, (1) pre-lubed 5mm housing (2M) (4) grommet clasps, (3) flat nosed/braze-on ferrules, (2) 45deg short nosed/shifter ferrules, (2) long nosed/barrel adjuster ferrules, (1) long nosed...>> more >>
|
| CBO Price: $69.00 - $79.99 | |
|
|
|
|
Drivetrain by Soma
|
|
|
|
Threaded track cog for 1.37"x24tpi (right handed) threads. For 1/2" pitch x 3/32" width chains . CNC CrMo steel construction. Chrome-plated
|
| CBO Price: $31.90 - $33.90 | |
|
|
|
|
Drivetrain by IRD
|
|
|
|
Indexed thumb shifters available again. Thumb shifters are lighter, reliable and rebuildable
9 speed Shimano compatible, 2:1 ratio, rear shifter. Friction front shifter completes the set
Hinged alloy clamp for easy installation
Includes shim to allow use on road or mountain bars
|
|
|
|
