Dyna-Sys specific (HG-X) 10-speed mountain drivetrain compatibility: specific to double (2x) or triple (3x) front drivetrains
Wide link pivot design for increased rigidity and response with outward angled set screws and re-profiled cage for better clearance
Convertible between top-pull or bottom-pull cable routing applications
Low clamp (top swing) or high clamp (down swing) models
Uni-band version fits 34.9/31.8/28.6mm seat-tubes with included shims
E-type version for specific bottom bracket mounted plate (included)
E2-type is for frame bracket mount and does not include BB plate or bracket fixing unit bolts
Direct-mount version with integrated housing stop for single M6 bolt with groove design (single bolt located 155.5mm from center of BB shell)
For 66-69 degree (most common) chainstay/seat-tube angles and a 46.8-48.8mm (double) or 50.0mm (triple) chainline: 125-155g (black/silver)
Shimano XTR Front Derailleurs
50mm Chainline
Compatible with E2 Direct mount by removing the E-Type back plate
E2 Direct Mount is used on some Yetis, Pivots, Lapierres, Specializ